How to Solve the Loud Noise After Hollowing Out the Catalytic Converter?

2 Answers
DiKatherine
09/05/25 4:41am
The solution to the loud noise after hollowing out the catalytic converter is to replace it with a new one. The catalytic converter plays a part in noise reduction. If the catalytic converter is hollowed out, the exhaust system is prone to various noises and resonances, and the entire system will be unable to purify the exhaust gases, which will cause significant inconvenience for the vehicle's subsequent annual inspections. The catalytic converter is an important external purification device in the automobile exhaust system. Its function is to convert harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides in the automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. The catalytic converter consists of a shell, a damping layer, a carrier, and a catalyst coating.
Was this review help?
6
5
Share
VonEden
09/17/25 5:12am
I've encountered this situation before. After hollowing out the catalytic converter, the car's sound became extremely loud with a constant droning noise that hurt my ears. The main reason is that without that purification device, the exhaust is directly released without any buffering, naturally causing increased noise. To solve this issue, I think the most cost-effective solution is to install a new catalytic converter. Otherwise, the noise will continue to affect driving comfort and might even lead to neighbor complaints. You can check local auto parts markets for used or low-priced new units - the cost might be just a few hundred yuan. When installing, ask an acquaintance to help tighten the exhaust pipe bolts properly to avoid air leaks that could worsen the noise. Additionally, inspect the entire exhaust system for any loose or corroded parts, as these issues might compound to create abnormally loud sounds. Remember not to cut corners - prolonged exposure could damage hearing and you might get pulled over for emission tests, which really isn't worth it. Spending a small amount to fix it will make the car quieter and more pleasant to drive. I've tried this method with good results - inexpensive yet effective in solving the problem.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What are the differences between Black Badge and the standard version?

As a special edition model, the Rolls-Royce Black Badge Cullinan has significant visual differences compared to the standard version. The specific differences are as follows: 1. First is the body color scheme, with black paint and chrome materials providing a highly glossy appearance. 2. The exterior design remains largely consistent with the standard version. The major differences include the use of black backgrounds with silver lettering at the front and lower sides, as well as black window frames and trunk handles. 3. The new 22-inch cast alloy exclusive wheels, high-gloss polished black paint, and colored brake calipers can withstand the high temperatures generated by the high-power braking system.
14
0
Share

When will the Ford Edge be launched?

According to internal sources from Changan Ford, the 2021 Ford Edge will be launched on December 22 and is expected to be renamed "Edge Plus". Here are more related details: 1. Exterior Introduction: The Edge Plus does not feature significant exterior changes. Compared to the current model, it has an enlarged front grille that further connects with the headlight clusters, featuring a mesh-like decoration inside, and minor adjustments to the fog light area layout for a more sporty look. At the rear, the chrome trim has been moved above the taillight clusters, with no other changes. The new model focuses on upgrading the interior design, adopting a "Mercedes-style" dual-screen setup on the dashboard, which is expected to improve operational convenience and smoothness. 2. Configuration: The Edge Plus mid-range and higher trims come equipped with L2 driver assistance and a B&O sound system. Additionally, the vehicle improves rear legroom and enhances seat comfort, still offering 5-seat or 7-seat versions. As a yearly update model, it is expected that the powertrain will remain unchanged, continuing with the 2.0T or 2.7T engines paired with an 8-speed automatic transmission.
8
0
Share

What suspension does the BMW M140i use?

BMW M140i uses an independent suspension system. The front suspension is a double-joint independent suspension, and the rear suspension is a multi-link independent suspension. Here is an introduction to the multi-link independent suspension: 1. Definition: The multi-link independent suspension consists of links, shock absorbers, and damping springs. It has more links than a typical suspension. By convention, suspensions with 4 or more links are referred to as multi-link suspensions. 2. Function: The multi-link suspension not only ensures a certain level of comfort but also, due to the increased number of links, allows the wheels to maintain as vertical a position as possible relative to the ground, minimizing body tilt. This maximizes tire contact with the road surface.
16
4
Share

Can I turn on the air conditioning in neutral gear?

You can turn on the air conditioning in neutral gear. Here are the specific details about neutral gear in cars: 1. Definition: Neutral gear typically refers to the state where the vehicle's gearshift lever is not engaged in any forward or reverse gear, completely disconnecting the transmission from the drive wheels. In manual transmissions, neutral is in the middle position, while in automatic transmissions, it is marked with an 'N'. 2. Shifting method: To shift into neutral without pressing the clutch, release the accelerator and gently move the gearshift. Avoid using excessive force; usually, two fingers are sufficient to shift into neutral. Generally, you can shift into neutral at any time by releasing the accelerator, and pressing the brake allows you to shift into neutral.
7
3
Share

How to set up the automatic handbrake when the CRV is turned off?

Through the compensation mechanism at the connection between the bottom of the handbrake handle and the copper cable. There are three types of braking systems: 1. Foot brake: The brakes commonly used while driving are operated by foot, hence also called foot brakes. When the driver presses the brake pedal, the braking force is transmitted mechanically or hydraulically to the wheel's braking device to generate friction; 2. Parking brake: Also known as the handbrake, it is a braking device to prevent the vehicle from slipping when parked. There are generally two types: the intermediate braking type installed on the drive shaft and the direct control rear wheel braking type; 3. Anti-lock braking system (ABS): When driving on slippery or icy low-friction roads, excessive braking may occur, causing the wheels to be locked by the braking device and lose traction, leading to loss of control over the vehicle's direction. To enable effective control of the vehicle's direction on such hazardous roads, the ABS "Anti-lock Braking System" was developed.
2
2
Share

How is violation code 71051 penalized?

Deduct 1 point, and severe cases may result in vehicle impoundment. Below is the relevant introduction of the violation code: 1. Introduction: The traffic violation code table contains 337 types of violations, including: 175 for motor vehicle traffic, 55 for non-motor vehicle traffic, 30 for pedestrians and passengers, 28 for highway traffic, and 49 for other regulations; 2. Composition: Traffic violation codes consist of four digits, classified according to the principles in traffic laws. The order from left to right is: one digit for behavior classification, one digit for point deduction classification, and the last two digits as sequential numbers.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.