How to Solve the Issue When the Urea Warning Light Comes On?

1 Answers
McEmiliano
07/29/25 10:26am
Urea warning light usually indicates a malfunction in the nitrogen-oxygen sensor or urea nozzle. It is recommended that users replace the urea pump and power supply module connector. Below are precautions regarding the vehicle urea light: 1. Regularly check the urea liquid level in the urea tank and replenish urea solution in time. The consumption of vehicle urea solution is 4%-6% of diesel consumption. Estimate the amount of urea solution needed based on the trip and carry an adequate amount of barrel urea solution when necessary. 2. When refilling vehicle urea solution, use a dedicated urea solution refill pipe to prevent impurities from mixing in. 3. Vehicle urea solution is alkaline and somewhat corrosive. Avoid contact between urea solution and metal.
Was this review help?
12
2
Share
More Forum Discussions

Can You Keep Driving with Overheated Truck Tires?

You can continue driving if you're not afraid of the tires catching fire, as many vehicle fires start from the tires. Professionals remind drivers to pay special attention to the use and maintenance of truck tires during the hot summer months to prevent blowouts that could lead to accidents. Below are some summer tire care tips: 1. Tip one: Due to temperature effects, the gas inside tires will automatically expand. To maintain proper tire pressure, it is recommended to fill tires with nitrogen in summer, reducing the filling pressure by 10%. 2. Tip two: Replace tires promptly. High summer temperatures accelerate tire rubber wear and aging, reducing the strength of the steel belt layer. Generally, there are raised markers in the tire tread grooves, and owners should replace tires in time. 3. Tip three: Front tires wear faster than rear tires because of steering. To extend tire lifespan, regularly rotate tires to balance wear between front and rear tires. The diagonal rotation method is commonly used to ensure even wear across all tires.
17
0
Share

What documents are required for small car inspection?

For small car inspection, you need to bring the original vehicle license and ID card. If it's a delegated process, the original ID cards of both the entrusting party and the entrusted party must also be fully prepared. Below is more information about car inspection: 1. Introduction: Annual inspection refers to the annual or biennial safety inspection of a car, which includes a comprehensive check of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. Vehicle annual inspection is a mandatory test for every vehicle that has obtained an official license plate and vehicle license, equivalent to an annual physical examination for the vehicle according to the safety technical conditions for motor vehicle operation. Vehicle annual inspection can promptly eliminate potential safety hazards, urge the strengthening of car maintenance, and reduce the occurrence of traffic accidents. 2. Time: Vehicle annual inspection can be conducted within the last 3 months before the inspection expiration date.
15
2
Share

Why is there a noise when starting the car after it has been parked for a long time?

When a vehicle is started after being parked for an extended period, it is considered a cold start. The reasons for noise when starting the car after it has been parked for a long time are as follows: Reason 1: The brake disc and brake pads may produce abnormal noise due to rust bonding them together, which is a normal phenomenon. If the car is left for several days, especially in humid weather, moisture on the brake disc and brake pads can cause rust, leading them to stick together. Reason 2: Excessive carbon deposits in components such as the throttle valve, intake tract, and fuel injectors can result in incomplete combustion, causing the mixture to enter the exhaust pipe and produce a popping sound. Reason 3: Disordered ignition timing can cause unburned gasoline to reach the exhaust pipe before igniting, resulting in the sound of gasoline atomizing and burning inside the exhaust pipe.
3
4
Share

What are the three major types of media for tanker trucks?

Tanker trucks' three major types of media include liquid substances suitable for transporting gasoline, kerosene, diesel, vegetable oil, edible oil, heavy oil, coal tar, and non-petroleum products such as alcohols, aldehydes, benzene, and ethers. Driving a hazardous material transport vehicle requires holding a 'Hazardous Materials Professional Qualification Certificate'. Below are the requirements for transport vehicles: Gas transport vans: Vans transporting bottled compressed gases and liquefied gases must be equipped with ventilation devices and securing devices. Flammable and explosive material transport vehicles: Special vehicles transporting flammable and explosive materials must be equipped with conductive rubber drag straps that comply with regulations. Horizontal bottled gas transport vehicles: Special vehicles transporting horizontally placed bottled compressed gases and liquefied gases must meet the internal width dimensions of the cargo compartment to the length of the gas cylinders; otherwise, they must be replaced with vehicles that meet transport requirements. Oxide transport vehicles: Oxidizers and organic peroxides must be transported using temperature-controlled special vans.
17
0
Share

What causes the popping sound in the Lingpai's exhaust pipe?

During the use of a Lingpai car, a popping sound may occur. Generally, this is caused by a blockage in the fuel line or poor fuel flow. Another possible cause is a quality issue with the fuel injector itself or blockage due to debris. If a popping sound is heard, it is advisable to seek a professional mechanic for a detailed inspection as soon as possible. The specific causes of the popping sound in the exhaust pipe are as follows: 1. Fuel line: Blockage, poor flow, or rail pressure issues can lead to the sound. Abnormalities in the electric fuel pump or fuel filter blockage due to various reasons, as well as restricted fuel delivery, can also be causes. 2. Fuel injector abnormality: Quality defects, blockages caused by foreign objects, poor sealing, aging O-rings, and other issues can trigger the sound. 3. Air intake or idle control: Problems with the stepper motor, dirty or leaking throttle valve body, or abnormalities in sensors such as atmospheric pressure, temperature, and throttle position, as well as incorrect data, can contribute to the issue.
7
5
Share

Is there only one rear fog light?

There is only one rear fog light. The reason for having only one rear fog light is to distinguish it from the brake light, as both the rear fog light and the brake light are red, making it difficult to differentiate them based on color alone, which could affect the judgment of drivers behind. A single rear fog light has higher visibility. The purpose of the rear fog light is to make the vehicle visible to other vehicles in conditions of reduced visibility, such as foggy or rainy weather. Precautions for driving in foggy conditions: 1. Turn on the fog lights, position lights, hazard warning flashers, and low beams to improve visibility and better see vehicles, pedestrians, and road conditions; 2. Try to drive within the lane markings and avoid crossing them; 3. Reduce speed and drive slowly, as poor visibility in foggy conditions can lead to longer stopping distances if the speed is too high; 4. Use the horn to indicate your position and alert other vehicles and pedestrians; 5. Maintain a greater following distance than in normal weather conditions.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.