How to Solve the Issue of Automatic Car Locking After Unlocking?

Should You Shift to Neutral When Stopping at Traffic Lights?

Manual transmission cars should be shifted to neutral when stopping at traffic lights, while automatic transmission cars do not need to be shifted to N gear when stopping at traffic lights. Neutral typically refers to the state where the vehicle's gear lever is not engaged in any forward or reverse gear, and the transmission is completely disengaged from the drive wheels. For manual transmissions, neutral is in the middle position, while for automatic transmissions, it is marked as "N". Below is relevant information: Precautions when shifting to neutral: After shifting to neutral, you must engage the handbrake or step on the brake pedal. Since the car is in neutral, the driveshaft has no restraining force, and any external force can affect the car's movement. This is particularly dangerous on slopes, where inertia can easily cause the car to move unexpectedly. Do not shift to P gear when waiting at a red light, as a rear-end collision could damage the transmission. When to use neutral: For temporary stops when the vehicle needs to be parked briefly; when waiting at a red light, to ensure safe parking. The purpose of neutral: The main purpose of neutral is to allow the vehicle to coast using inertia while idling, which helps reduce fuel consumption and minimizes wear on the transmission.

17

2

Share

Can I Drive Without a Paper License If I Have an Electronic Driving License?

An electronic driving license can be used in scenarios such as law enforcement inspections, purchasing insurance, car rentals, expanding passenger and freight transport, and handling traffic management affairs, in which case a paper driving license is not required. However, it cannot replace a paper license in situations like license suspension or revocation. Currently, electronic driving licenses are only being piloted in some cities and have not been implemented nationwide. In cities where electronic driving licenses are already in effect, you may drive without carrying a paper driving license. The electronic license can be used for inspections but has regional limitations. While it can be used for traffic management affairs, it cannot be used for matters such as traffic violations, point deductions, license suspension, or revocation. Electronic driving licenses are more flexible than traditional ones. If there are changes in address or personal information, they can be submitted online and modified in the database after review by the vehicle administration bureau. License information will be synchronized with the database in real time. As a supplement to paper licenses, electronic licenses can also serve as backups, making it easier to reissue paper licenses. Electronic driving licenses hold the same legal validity as paper ones. An electronic vehicle license is the digital version of a vehicle license and serves as a supplement to the physical document. In cases where the physical document is not carried, the electronic version can also be accepted for roadside inspections.

9

4

Share

Why are there still water marks on the windshield film after 10 days?

The presence of water marks on the windshield film after 10 days may be due to two reasons: either the film has good heat insulation properties, or the film is of poor quality, which is a quality issue. If the film has good heat insulation, the moisture inside the film dissipates slowly. In this case, it is recommended to wait a few more days until the moisture inside the film completely evaporates, and the water marks will disappear. Alternatively, a heat gun can be used to accelerate the dissipation. If the film is of poor quality, it is recommended to remove it and reapply a high-quality, well-known brand of film, and have it installed by a professional. Water marks appearing after applying car film is a common occurrence. If the film is applied in low-temperature conditions, wrinkles, also known as water ripples, are likely to appear. Additionally, improper installation techniques, such as uneven scraping or inconsistent pressure, can leave residual moisture, leading to water ripples. These situations are usually normal. After applying car film, water marks generally disappear naturally as the moisture evaporates over time. In summer, this may take about two to three days, while in winter, it may take up to a week. Films with better heat insulation may require even longer. If the water marks do not disappear on their own, a heat gun can be used to speed up the process. Furthermore, water marks on the film may also be caused by poor-quality film. If water ripples appear after the car film has been used for some time, this is a quality issue, indicating the use of inferior film that fails to meet quality standards. No method can prevent water marks or bubbles from appearing with such films. Moreover, poor-quality car films may initially seem fine but can develop bubbles, water marks, or even deform and curl over time, obstructing visibility. In such cases, it is highly recommended to remove the film and reapply a high-quality, well-known brand of film, installed by a professional.

14

3

Share

What Causes the Yellow Engine Light on the Car Dashboard?

The yellow engine light on the car dashboard can be caused by oxygen sensor failure, air flow sensor failure, spark plug carbon buildup, or coolant temperature sensor damage. The yellow engine light indicates an engine malfunction, which is a serious issue that directly affects engine lifespan and safe driving. Solutions for the engine warning light: Oxygen Sensor Failure: Most cars are equipped with two oxygen sensors, one before and one after the catalytic converter. The front oxygen sensor monitors the air-fuel ratio under different engine conditions, while the ECU uses this signal to adjust fuel injection and calculate ignition timing. The rear sensor primarily checks the performance of the catalytic converter. If the oxygen sensor is damaged or its connector is loose, it can cause the mixture to become too lean or too rich, triggering the warning light. The solution is to replace the oxygen sensor. Air Flow Sensor Failure: The air flow meter converts the intake air volume into an electrical signal sent to the engine control unit (ECU), which then determines the optimal fuel amount based on the air-fuel ratio. If the air flow sensor or its circuit malfunctions, the ECU cannot receive accurate intake data, leading to improper fuel regulation and causing the mixture to become too lean or too rich. This may result in engine malfunction and sometimes trigger the warning light. The solution is to replace the air flow sensor. Spark Plug Carbon Buildup: Poor-quality fuel and congested urban driving conditions can easily cause carbon deposits on spark plugs. Carbon buildup leads to poor engine performance, including difficulty starting, unstable idling, poor acceleration, excessive emissions, and increased fuel consumption. The solution is to clean the spark plug carbon deposits. Coolant Temperature Sensor Damage: The coolant temperature sensor contains a thermistor with resistance that decreases as temperature rises and increases as temperature drops. When the engine is cold, the sensor signals the ECU to enrich the air-fuel mixture for stable operation. If the sensor fails to send this signal, the mixture becomes too lean, affecting engine performance. Conversely, if it sends a cold signal when the engine is warm, the mixture becomes too rich, causing irregular operation. The solution is to replace the coolant temperature sensor.

20

4

Share

What is the ground clearance of the Magotan?

The ground clearance of the Magotan is 114mm. The Magotan features a front MacPherson strut independent suspension and a rear multi-link independent suspension structure. Advantages and disadvantages of high ground clearance in cars: The advantage is that higher ground clearance provides better off-road capability. Additionally, vehicles with higher ground clearance generally offer the driver a better field of vision and improved scenery visibility. The disadvantage is that increased ground clearance raises the vehicle's center of gravity, reducing stability at high speeds. Advantages and disadvantages of low ground clearance in cars: The advantage is that lower ground clearance naturally lowers the vehicle's center of gravity, making driving on roads relatively safer and more stable. This is especially beneficial when driving on highways, as it enhances safety. The disadvantage is that lower ground clearance reduces off-road capability and increases the risk of scraping the undercarriage. The choice depends on the vehicle's intended use and the road conditions. Generally, for urban driving with good road surfaces, vehicles with lower ground clearance are preferred for increased stability and comfort. For long-distance travel or driving in areas with poor road conditions, vehicles with higher ground clearance are recommended to enhance off-road performance and avoid undercarriage damage. The specific choice should be made based on individual needs.

5

1

Share

What Causes Water to Drip from a Car's Exhaust Pipe?

Water dripping from a car's exhaust pipe occurs because gasoline, when completely burned, produces water and carbon dioxide. The water turns into steam at high temperatures, and the white smoke emitted from the exhaust pipe is actually water vapor. When the ambient temperature is low, the water vapor condenses into droplets as it passes through the metal pipe, eventually forming water that flows out of the exhaust pipe. Dripping water from the exhaust pipe is a normal phenomenon, indicating efficient combustion in the car's engine. However, there are exceptions. For example, if the engine's cooling system leaks and coolant enters the combustion chamber, it can also cause water to drip from the exhaust pipe. If the dripping seems abnormal, simply check the engine compartment's coolant level to rule out a leak. To maintain the exhaust pipe, it's important to prevent rust in the muffler. Avoid water entering the muffler during car washes or rainy weather. If water does enter, start the engine and let it idle for about 10 minutes to evaporate the accumulated water. Additionally, prevent discoloration of the muffler. If oil stains are present on the muffler's surface, heat from the engine can cause yellowing or deterioration. If the muffler is covered in mud or dirt, clean it promptly to ensure proper heat dissipation.

18

1

Share

How to Solve the Issue of Automatic Car Locking After Unlocking?

Should You Shift to Neutral When Stopping at Traffic Lights?

Can I Drive Without a Paper License If I Have an Electronic Driving License?

Why are there still water marks on the windshield film after 10 days?

What Causes the Yellow Engine Light on the Car Dashboard?

What is the ground clearance of the Magotan?

What Causes Water to Drip from a Car's Exhaust Pipe?

What are the main components of the piston connecting rod assembly?

What does detecting a CAN network fault mean?

What is the tire size of the Cavalier?

What Are the Causes of a Reversing Camera Displaying a Blurred Screen?