How to solve the high fuel consumption of an old Audi Q5?

Car Light Signals Reference Table?

Car light signals reference table refers to a comprehensive guide of car light signals. The following is an introduction to the car light signals reference table: 1. When the light turns green but the car in front doesn't move or when you want to overtake: flash the headlights once. This is commonly used when the car ahead is driving slowly on the road and the driver behind intends to overtake, or when at a traffic light that has turned green but the car ahead still hasn't moved, flashing the headlights once serves as a reminder to the driver ahead. 2. When encountering strong glare from headlights at night: flash twice as a reminder. This is commonly used when meeting another car at night, and the other car is still using high beams, causing glare. The affected driver needs to flash the headlights twice to remind the other driver to switch to low beams. 3. When there is a problem with a neighboring car: flash the headlights three times. This is generally used when the trunk or door of the neighboring car is open, or when the tire pressure is insufficient, to remind the neighboring car to pull over and check for potential safety hazards. 4. When a car needs to merge: a single flash indicates agreement, while continuous flashing indicates refusal. This is commonly used when a car in the same direction is changing lanes or when a car from another lane is merging onto the main road. 5. When the following car is too close: intermittently illuminate the brake lights. This is commonly used during driving when the car behind is following too closely, increasing the risk of a traffic accident, so the brake lights are used to remind the following car to maintain a safe distance.

19

1

Share

How often should the throttle be cleaned on a Sagitar?

The throttle cleaning interval for the Sagitar, as specified in the maintenance manual, is recommended every 15,000 to 30,000 kilometers. The exact timing depends on factors such as the vehicle's operating environment, fuel quality, and air filter replacement schedule. The reasons for cleaning the throttle are as follows: 1. As the vehicle accumulates mileage, carbon deposits naturally build up, and the throttle is particularly prone to carbon accumulation. 2. Increased carbon deposits can thicken the throttle plate. Given the throttle's precise control, even minor carbon buildup can disrupt the air intake volume, causing it to deviate from the engine computer's requirements. This leads to poor combustion, reduced engine power, and increased fuel consumption. 3. In more severe cases, carbon buildup can cause throttle sticking, resulting in symptoms like sluggish acceleration, engine vibration, higher fuel consumption, or even stalling. Therefore, regular throttle cleaning is essential.

7

1

Share

How much tire pressure should a car have in summer?

According to the season, the general tire pressure in summer is 2.3kg for the front tires and 2.5kg for the rear tires; in winter, it's 2.5kg for the front tires and 2.7kg for the rear tires. The exact values may vary slightly depending on the vehicle model and style. It is necessary to refer to the standard tire pressure chart on the car. The standard tire pressure chart can usually be found in the following places: the vehicle user manual, the label near the driver's door (near the B-pillar), the drawer next to the driver's seat, or the fuel tank cap door. Excessive tire pressure: If the tire pressure is too high and significantly exceeds the standard pressure, the tire's friction and adhesion will decrease, affecting braking performance, causing steering wheel vibration and deviation, and reducing driving comfort. At the same time, it accelerates the wear of the central tread pattern, shortens the tire's lifespan, increases body vibration, and indirectly affects the lifespan of other components. Insufficient tire pressure: If the tire pressure is too low and significantly below the standard pressure, it increases the friction coefficient between the tire and the road surface, leading to higher fuel consumption. It also makes the steering wheel heavy and prone to deviation, among other factors that are detrimental to driving safety. Insufficient tire pressure increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling.

15

3

Share

Is Engine Restoration Protection Fluid Useful?

Engine restoration protection fluid has certain benefits. It can effectively reduce wear and corrosion of engine components, inhibit the formation of deposits such as gum and sludge, and form an extremely thin yet highly pressure-resistant and wear-resistant protective layer on metal surfaces. This prevents oil oxidation, thickening, and acidification, thereby protecting engine parts and extending engine life. It also effectively reduces noise caused by friction or degraded oil lubrication performance. Engine restoration protection fluid, also known as engine protectant, is used when a gasoline engine is in the break-in period or when hydraulic lifters produce abnormal noise. Simply mix it with engine oil according to the specified ratio and add it to the engine crankcase.

14

2

Share

What engine does the Haval H4 use?

Haval H4 is equipped with a 1.5-liter inline 4-cylinder turbocharged engine. Here are some details about the Haval H4 engine: 1. Although the Haval H4 uses the same 1.5-liter inline 4-cylinder turbocharged engine, the manufacturer has tuned it differently. The 2020 Haval H4 is the low-power version, while the 2019 Haval H4 is the high-power version. 2. Low-power version: It is paired with either a 6-speed manual or a 7-speed dual-clutch transmission, with a maximum power of 110KW, maximum horsepower of 150PS, and maximum torque of 210N·m. 3. High-power version: It is paired with either a 6-speed manual or a 7-speed dual-clutch transmission, with a maximum power of 124KW, maximum horsepower of 169PS, and maximum torque of 285N·m.

1

2

Share

How to Replace Windshield Washer Fluid in Winter?

Method for replacing windshield washer fluid in winter: 1. Open the car's hood. The hood release lever is usually located under the dashboard in front of the driver's seat. Gently pull it to open the hood, then secure the hood with the support rod. 2. Locate the windshield washer fluid reservoir. Typically, the washer fluid tank is on the right side of the engine compartment, and the cap is usually marked with a symbol. The cap of the windshield washer fluid reservoir is blue. 3. After locating the reservoir, open the cap and add the washer fluid. Most vehicles require about 4L of washer fluid. There is a dipstick inside the tank; stop adding when the fluid reaches the marked line to prevent leakage while driving. Windshield washer fluid is a liquid used to clean the windshield of vehicles and other transportation tools. It is a consumable item in car maintenance, mainly composed of water, alcohol, and ethylene glycol, and has functions such as cleaning, antifreeze, and anti-fogging.

3

1

Share

How to solve the high fuel consumption of an old Audi Q5?

Car Light Signals Reference Table?

How often should the throttle be cleaned on a Sagitar?

How much tire pressure should a car have in summer?

Is Engine Restoration Protection Fluid Useful?

What engine does the Haval H4 use?

How to Replace Windshield Washer Fluid in Winter?

Why Is It Hard to Start a Car in Winter?

Does Cold Start in Winter Consume More Fuel?

Should ETC be activated or installed first?

Can You Make a U-Turn on a Single Yellow Line on the Road?