How to Solve the False High Temperature Issue in BYD F3?

1 Answers
Carolyn
07/30/25 7:41am
Pull the car over to the roadside, but do not rush to turn off the engine immediately, as excessively high water temperature can lead to overheating, thinning of the engine oil, and loss of lubrication. Put on gloves, place a wet cloth over the radiator cap, and slightly loosen the cap to release pressure. Once the pressure in the radiator decreases, add cool water or antifreeze. When washing the car, pay attention to cleaning dirt off the radiator surface, as these can reduce cooling efficiency. If the thermostat is damaged or malfunctioning, it needs to be removed and replaced, which is generally handled by professionals.
Was this review help?
18
1
Share
More Forum Discussions

Why is water dripping under the car?

Reasons for water dripping under the car: 1. The car windows were not tightly closed during rainy days; 2. Issues with the drainage outlets. If water still drips under the car cabin after eliminating human factors, the car's drainage outlets should be checked; 3. Long-term accumulation of debris blocking the drainage holes, especially in vehicles with sunroofs, as opening the sunroof makes it easier for debris to accumulate and cause leaks. Methods to handle car leaks: 1. Remove accumulated water inside the car using dry towels or water scooping tools; 2. Check which parts and components inside the car are damaged. If the damage is severe, timely repairs at a repair shop are necessary; 3. Identify the cause of the leak by checking the four common reasons mentioned above one by one. If self-inspection is not possible, professional personnel at a repair shop can be consulted for detection.
16
2
Share

What causes the sunroof rattle in the Roewe erx5?

The causes of sunroof rattle in the Roewe erx5 are: 1. Aging of sunroof rubber seals or gaskets; 2. Loose sunroof screws; 3. Presence of dust particles in the sunroof sliding rails; 4. Dryness in the sunroof sliding rails. The Roewe erx5 is a compact SUV launched by SAIC Motor. Taking the Roewe erx5 2020 Plus GuoChao RongLin Luxury Edition as an example, its body dimensions are: length 4571mm, width 1855mm, height 1719mm. The Roewe erx5 2020 Plus GuoChao RongLin Luxury Edition is equipped with a 1.5T turbocharged engine, with a maximum power of 124 kW and a maximum power speed of 5500 rpm, matched with a 10-speed mechanical automatic transmission.
11
5
Share

Does the vv6 have a new energy model?

vv6 does not have a new energy model, this car only has a pure gasoline version. Here is more information about this car: 1. vv6 is a compact SUV under the wey brand, this car is equipped with a 2.0-liter turbocharged engine across the entire lineup. The dimensions of the vv6 are 4625mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. 2. The 2.0-liter turbocharged engine of the vv6 has a maximum power of 167kw and a maximum torque of 387 Nm, the maximum torque speed of this engine is 1800 to 3600 rpm, and the maximum power speed is 5500 rpm.
12
3
Share

How to Replace the Fuel Filter on Wuling Rongguang New Truck?

Drive the vehicle onto the maintenance platform and lift it approximately 30 cm off the ground. Shake the car to ensure it is secure and stable. Before replacing the fuel filter, release the pressure in the fuel line to prevent gasoline splashing. Remove the fuel pump relay from the fuse box and then start the vehicle. Lift the vehicle, use a spanner to remove the clamps at both ends of the fuel filter, then disconnect the fuel lines. Use a wrench to remove the clamps securing the fuel filter. After comparing the old and new fuel filters to confirm they match, install the new fuel filter, ensuring the correct orientation. Lower the vehicle, reinsert the fuel pump relay, start the vehicle, and check for any fuel leaks. If there are no leaks, the vehicle is safe to drive.
12
2
Share

How to Change BMW Maintenance Mileage?

BMW maintenance mileage change method: 1. Turn the ignition to the second position, then press and hold the protruding button on the lower left corner of the dashboard for about 8 seconds. 2. The oil or symbol will be displayed on the dashboard. 3. Release the button and then adjust to the oil symbol. 4. Hold the button without releasing to reset. Methods to avoid exceeding the maintenance mileage: 1. When the vehicle is approaching the maintenance mileage, the vehicle's information display system will usually prompt, so the owner should try not to continue driving. Although exceeding 500-1000km does not have a significant impact on the vehicle, it is still necessary to perform maintenance as required. 2. Before long-distance driving, it is best to check the technical condition of the vehicle and properly supplement the tire pressure to avoid accidents during driving. 3. For vehicles that have already exceeded the maintenance mileage, they should be sent to the repair shop for maintenance in time, otherwise the vehicle problems will become more serious.
14
3
Share

What is the method for matching the throttle on a Toyota Reiz?

Here is the specific method for matching the throttle on a Toyota Reiz: 1. Turn off the ignition switch and wait for at least 10 seconds. Fully release the accelerator pedal, then turn the ignition switch to the ON position and wait for 3 seconds. 2. Within 5 seconds, quickly repeat the following operation 5 times: fully depress the accelerator pedal and then fully release it. 3. Wait for 7 seconds, then fully depress the accelerator pedal and hold it in this position for about 20 seconds, until the MIL stops flashing and starts to stay lit. 4. Within 3 seconds after the MIL light stays on, fully release the accelerator pedal. 5. Start the engine and let it idle for a while. Allow it to idle for more than 20 seconds, then rev the engine two or three times to confirm that both the idle speed and ignition timing meet the specified requirements.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.