How to Solve the Engine Emission Warning Light Issue?

1 Answers
MadisonMarie
07/28/25 6:45pm
Solutions for the engine emission warning light being on: 1. Start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it. This method is only applicable to false faults in the engine; 2. If the warning light comes on and the vehicle cannot start after being turned off, this is usually due to a fuel pump or ignition device failure. In this case, call for roadside assistance immediately; 3. The engine exhaust system warning light is often caused by poor fuel quality in the country, damage to the oxygen sensor in the three-way catalytic system, or poisoning of the three-way catalytic converter. If this light comes on while driving, reduce speed immediately and drive to the nearest repair service station for inspection; 4. If you can continue driving but experience severe shaking, lack of acceleration power, or other symptoms, it is recommended to stop driving. This not only prevents further damage to the engine but also ensures the safety of passengers in the vehicle.
Was this review help?
8
1
Share
More Forum Discussions

Do Hybrid Electric Vehicles Need to Be Charged?

Hybrid electric vehicles do not need to be charged. The relevant principles are as follows: 1. The so-called hybrid refers to having two power sources, the thermal power source generated by gasoline or diesel and the electric power source generated by the battery; 2. In addition to the power system, the vehicle itself is also equipped with an energy recovery system. During driving, the residual energy of the engine and the braking power of the brakes can be converted into electrical energy and stored in the battery to achieve the purpose of charging; 3. As long as the vehicle is driving normally, it can charge the power system, so there is no need for special charging. When the vehicle is driving normally, the engine and the power system work simultaneously at a certain point, such as during startup and acceleration. The motor plays a certain auxiliary role, thereby achieving the goal of reducing fuel consumption. This is why hybrid vehicles are fuel-efficient; 4. During the use of hybrid models, there is no need to deliberately adjust the driving mode. The driving computer will automatically match the best operating mode to achieve the best power output and fuel economy.
5
2
Share

How to Identify Emission Standards?

There are four methods to check the emission standards of motor vehicles: first, check the environmental protection label; second, check the certificate of conformity; third, check online; fourth, check at the vehicle management office. Here are the detailed methods: 1. Check the Environmental Protection Label: Vehicle emissions are closely related to environmental protection. To find out the emission standard of a motor vehicle, you can first check the environmental protection label on the car, which usually has the emission standard marked on the back. 2. Check the Certificate of Conformity: Another way is to check the certificate of conformity, where the emission standard of the vehicle is usually indicated. 3. Check Online: You can also check online by visiting the public inquiry platform of the Motor Vehicle Environmental Protection Website. Simply enter the VIN number and the last six digits of the engine number to find out the emission standard. 4. Check at the Vehicle Management Office: Another method is to bring the vehicle's registration certificate to the local vehicle management office for inquiry.
14
0
Share

Can I renew my driver's license through 12123?

You can renew your driver's license through 12123. The renewal process through 12123: Renew through the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- Fill in the required information. The new license is generally delivered by mail. Besides renewing through the 12123 APP, you can also apply for renewal through the following methods: The driver can bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day upon approval. Visit the "Police-Medical-Post" service point at a postal office for renewal. The entire process, from registration to medical examination to the production of the new license, takes only half an hour. Currently, this service is only available in a few cities, such as Hangzhou.
2
1
Share

Can New Energy Vehicles Charge Outdoors on Rainy Days?

New energy vehicles can charge outdoors on rainy days. Here are some extended details: 1. Waterproof performance standards for charging piles: During the construction of charging piles, waterproof materials are applied to the bottom of the charging facilities, ensuring that the lower 20~30 cm of the charging pile body has flood-resistant capabilities. National standards for the waterproof performance of charging piles are very strict. Before charging begins, both the vehicle side and the pile side must undergo insulation testing. If the insulation test fails (due to rain or debris), charging cannot be initiated. 2. Materials of charging piles: Most charging piles are made of SMC fiberglass, which ensures long-term outdoor use and resistance to complex weather conditions. Additionally, modern charging piles are internet-connected, allowing their operational status to be monitored in real-time via a backend system. If any issues or malfunctions occur, alerts can be received immediately in the backend, ensuring charging safety. Even though charging piles are equipped with waterproof materials, it is recommended to avoid charging during heavy rain.
15
3
Share

Can You Still Drive If Water Gets Inside the Car?

You should not drive if water gets inside the car. Here are the details about water ingress in a car: 1. Scenario One: You can still drive, but if the air filter gets wet, the engine may draw in some water into the intake tract, forming water vapor. This vapor mixes with gasoline and burns completely, causing minimal impact on the engine. 2. Scenario Two: A small amount of water enters the engine and mixes with the oil, degrading the oil quality. Oil contaminated with water increases wear on engine components, potentially leading to louder engine noise and greater vibration in the future. 3. Scenario Three: The engine starts but shuts off after a few seconds, and subsequent attempts fail to restart it. This is the most severe scenario. Since water cannot be compressed, its presence in the cylinders during high-speed operation can cause the valves and connecting rods to bend, the pistons to seize, severe cylinder wear, and crankshaft bending.
17
4
Share

Why don't sedans have rear tow hooks?

Only the hooks at the rear of off-road vehicles are called tow hooks, which are used for towing trailers or caravans. For regular vehicles, they have tow rings for rescue purposes, located at both the front and rear. Many vehicles have their tow hook positions designed at the lower part of the bumper, and the exact location is usually indicated in the vehicle's user manual. Here is some additional information: 1. Tow ring location: The tow rings on sedans are hidden within the front and rear bumpers. There is a small cover on the bumper that can be removed to reveal the tow ring. For many sedans, the tow ring is a threaded hole, and the vehicle's toolkit includes a tow ring that can be screwed in for use. 2. Function: A car tow hook is a spherical towing device. Nowadays, most vehicles abroad are equipped with a tow hook system, and many car brands come with tow hooks as standard. Car tow hooks have become an essential component of vehicles. In case a vehicle being towed accidentally detaches from the tow hook while driving, a steel cable can prevent the towed vehicle from moving uncontrollably, thereby avoiding potential accidents.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.