How to Solve the Charging Pile Issue When Buying a New Energy Vehicle?

1 Answers
BryceDella
07/29/25 4:04pm
The charging pile manufacturer submits the installation materials to the power supply company, requiring the user's ID card copy and the new energy passenger car charging condition confirmation letter. After the manufacturer finalizes the construction plan, the installation and construction phase begins. The construction time varies depending on the conditions of each residential area and the location of the garage. Upon completion of the construction, the charging pile company will report to the power company for on-site inspection and acceptance. If the inspection is passed, the meter will be sealed, and the power company will produce the corresponding power card, which will then be collected by the charging pile company and handed over to the owner.
Was this review help?
15
4
Share
More Forum Discussions

Do Exempted Vehicles Still Require Annual Inspection?

Cars that have received an exemption mark are not exempt from annual inspections; they still need to undergo an inspection every two years, but the vehicle does not need to go to a testing station for the inspection. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination for the vehicle according to the 'Safety Technical Conditions for Motor Vehicle Operation'. The consequences of an expired vehicle inspection are as follows: 1. Vehicles that fail to undergo the annual inspection on time are not allowed on the road; 2. Vehicles driven on the road without timely annual inspection will be penalized with 3 points and a fine; 3. In the event of a traffic accident involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate; 4. Driving on the road without timely annual inspection is considered illegal driving and may result in the vehicle being impounded; 5. According to the 'Compulsory Scrapping Standards for Motor Vehicles', vehicles that fail to obtain an inspection qualification mark for three consecutive inspection periods after the expiration of the inspection validity period will be forcibly scrapped.
5
3
Share

How to Turn On and Off Cruise Control?

Cruise control can be turned on and off as follows: 1. Activate Cruise Control: Briefly press the cruise control button, and the corresponding indicator light on the instrument cluster will illuminate white. Increase the vehicle speed to the desired cruising speed (above 40 km/h), then briefly press the set/decelerate button. The corresponding white indicator light on the instrument cluster will turn green. Once the vehicle enters cruise control mode, release the accelerator pedal. 2. Deactivate Cruise Control: Press the brake pedal, shift the gear lever to N (neutral), briefly press the cruise control button (this will exit cruise control and clear the set cruising speed), operate the Electronic Parking Brake (EPB) button, or if the ESP system is activated. 3. Resume Cruise Control: When the vehicle speed is above 40 km/h, briefly press the resume/accelerate button. The cruise control indicator light on the instrument cluster will change from white to green, and the vehicle will resume the previously set cruising speed. 4. Increase Cruising Speed: Briefly press the resume/accelerate button to increase the speed by 1.6 km/h per press. Alternatively, hold down the resume/accelerate button to continuously increase the speed until the button is released. Upon releasing the button, the vehicle will begin cruising at the current speed.
1
5
Share

What are the symptoms of a faulty urea nozzle?

The malfunctioning of the fuel injector nozzle leads to ineffective operation, resulting in severe carbon buildup inside the engine cylinders, accelerated wear of the cylinder liners and piston rings, unstable idle speed, increased fuel consumption, lack of power during acceleration, difficulty starting, and excessive vehicle emissions. In severe cases, it can even damage the engine. The specific causes leading to intermittent cylinder misfires are as follows: 1. Ignition System: Aging of the ignition coil and spark plugs causes the cylinder's ignition system to fail. Problems with the ignition coil most commonly result in reduced power, and in severe cases, can cause the engine to stall suddenly. 2. Cylinder Wire Wear: To check if the cylinder wires are functioning properly, simply remove the cylinder wire without needing a screwdriver, insert a spark plug, start the engine, and compare each cylinder to identify issues. 3. Fuel Injection System: Clogged injector nozzles or fuel lines prevent sufficient fuel from being supplied to the cylinder for combustion, naturally causing the cylinder to malfunction. 4. Excessive Spark Plug Carbon Buildup: Long-term poor combustion leads to carbon deposits accumulating at the spark plug ignition point. When these deposits are wetted by fuel, they create a parallel shunt resistance, resulting in spark plug leakage, weak sparks, or even complete spark plug failure.
10
1
Share

Where is the drainage outlet of the Dongfanghong engine located?

The drainage outlet of the Dongfanghong engine is located under the windshield. The function of the Dongfanghong engine drainage outlet is to drain water, reduce water accumulation, and prevent water from entering the engine. Maintenance of the Dongfanghong engine drainage outlet includes timely cleaning of the drainage channel and using a high-pressure air gun to unclog it. Function of the Dongfanghong engine drainage outlet: The engine drainage outlet helps the engine discharge water flow, reducing the risk of water entering the engine and causing potential hazards. Accumulated water can lead to engine issues and reduce its lifespan, while the drainage outlet can extend the engine's service life. Maintenance of the Dongfanghong engine drainage outlet: Regularly inspect the engine drainage outlet and use a high-pressure water gun to flush out water flow, minimizing sludge retention.
3
4
Share

Should You Use Internal or External Air Circulation in the Car on Snowy Days?

Use external air circulation on snowy days. Reasons for using external circulation: In winter, due to lower temperatures, car windows are usually kept closed while driving. Prolonged lack of air circulation reduces oxygen levels inside the car, making it increasingly stuffy and uncomfortable for passengers. Function of external circulation: It's necessary to activate the car's external circulation to facilitate timely air exchange with the outside environment and refresh the interior air. When external circulation draws in cold air from outside, it passes through heating elements, converting even cold incoming air into warm air inside the cabin. Additionally, prolonged winter enclosure can easily cause window fogging, which can be quickly cleared using external circulation.
1
5
Share

What documents are needed to transfer a vehicle to someone else?

To transfer a vehicle to someone else, the seller needs to provide the original and photocopy of their personal ID card, the buyer needs to provide the original and photocopy of their personal ID card, and the original and photocopy of the vehicle's motor vehicle registration certificate and the original and photocopy of the vehicle license are required. When processing the vehicle transfer, both the buyer and seller need to provide the corresponding documents to complete the procedure smoothly. Below is more related information: 1. Transaction invoice: Pay the used car transaction tax. For private accounts, the rate is 1%, and for public accounts, it is 4%. 2. Vehicle inspection: Drive the vehicle to the inspection site for external inspection, tracing the number, removing the license plate, and taking photos. Collect the vehicle photos and attach them to the inspection record form, then proceed to the transfer hall to complete the filing procedure. 3. License plate selection: After obtaining a number from the number machine, queue up with the relevant materials to pay the transfer fee. 4. Transfer and relocation: Required materials include the motor vehicle registration, transfer, cancellation registration form/transfer application form, inspection record form, original motor vehicle property registration certificate, original vehicle license, original owner's ID card, original license plate number, vehicle photos, and the transfer invoice from the trading market.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.