How to Solve the Abnormal Noise When Pressing the Accelerator?

1 Answers
KyleLee
07/25/25 5:23pm
Abnormal noise from the fuel pump motor requires replacing the fuel pump. For abnormal noise from the throttle, cleaning the throttle is necessary; if the motor is damaged, the throttle needs to be disassembled to replace the servo motor. If the abnormal noise is caused by poor lubrication of the accelerator pedal bearing, you can apply grease to the bearing for lubrication. If the clutch release bearing is damaged, remove the clutch and replace the release bearing.
Was this review help?
3
0
Share
More Forum Discussions

What is the fuel consumption per kilometer for the Chery Tiggo 3?

The fuel consumption of this vehicle is related to its matched transmission system. 1. The 5-speed manual model has a MIIT-rated fuel consumption of approximately 6.7L per 100 kilometers, while the actual average fuel consumption is around 8L per 100 kilometers; 2. The CVT continuously variable transmission model has a MIIT-rated fuel consumption of approximately 7.6L per 100 kilometers, while the actual average fuel consumption is around 9L per 100 kilometers. Overall, the fuel consumption of this vehicle is not particularly low. Additional information: The Chery Tiggo 3 is equipped with a 1.6L naturally aspirated engine across the entire lineup, delivering a maximum power of 126 horsepower and a maximum torque of 160 Nm. This power output is quite good for this compact SUV. Additionally, the vehicle is paired with either a 5-speed manual or a CVT transmission, providing a very comfortable driving experience, and the power is more than sufficient to meet the demands of daily driving.
1
1
Share

How to Control the Car Clutch?

Do not step on the clutch unnecessarily, apply the right amount of force when pressing the clutch, and strictly follow the operating procedures when starting, shifting gears, and braking. The following is an introduction to the clutch: 1. Introduction: The clutch is a device that transmits the engine power of a car or other power machinery to the axle in an on-off manner. 2. Classification: According to the "China Clutch Manufacturing Industry Production and Sales Demand and Investment Forecast Analysis Report Prospect", clutches are divided into four types: electromagnetic clutches, magnetic powder clutches, friction clutches, and hydraulic clutches. 3. Principle: For manual transmission models, the clutch is an important component of the car's power system. The clutch is responsible for cutting off and connecting the power to the engine. When driving on urban roads or complex sections, the clutch becomes one of the most frequently used components. The proper use of the clutch directly reflects the driver's skill level and also plays a role in protecting the vehicle.
16
0
Share

Which way to toggle between low beam and high beam for the test?

Generally speaking, pushing the switch towards the engine compartment turns on the high beam. Pulling it back one notch turns off the high beam and restores the low beam. Pushing the switch one notch towards the driver activates the temporary high beam flash, and releasing the switch automatically returns it to the low beam position. Below is relevant information about low beams: 1. Function of low beams: Low beams are designed for close-range illumination, with a wide coverage angle (160°) but short projection distance, and the focus cannot be adjusted. 2. Definition of low beams: Low beams typically illuminate about 30-40 meters ahead. Experiments show that when driving at 55 km/h at night, the braking distance after spotting an obstacle is exactly 30 meters. This means if an object is detected within the low beam's range and brakes are applied immediately, the vehicle will stop just before reaching the object.
4
0
Share

What is the method for replacing the coolant in a Magotan?

The method for replacing the coolant in a Magotan is as follows: 1. Open the engine hood and prop up the engine support rod; 2. Locate the coolant reservoir; 3. Find the coolant drain plug at the bottom of the vehicle, open the plug, and drain the remaining coolant; 4. After draining, check to ensure all coolant has been emptied; 5. Tighten the drain plug and pour new coolant from the inlet. Taking the 2020 Magotan as an example, it is a mid-size car with body dimensions of 4865mm in length, 1832mm in width, 1471mm in height, and a wheelbase of 2871mm. The 2020 Magotan is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
4
3
Share

What is the reason for the loud abnormal noise when the Mercedes-Benz E300 air conditioner is turned on?

Mercedes-Benz E300 air conditioner abnormal noise is caused by air conditioner compressor abnormal noise, compressor transmission belt is too loose, electromagnetic clutch repeatedly engages and disengages, etc. The following is a related introduction about the Mercedes-Benz E-Class: 1. Introduction to the Mercedes-Benz E-Class: The Mercedes-Benz E-Class sedan is a medium and large high-end business sedan, sports car, and station wagon developed by Mercedes-Benz between the C-Class and S-Class. It is currently recognized that the ancestor of the E-Class is the 1947 Mercedes-Benz 170, which was one of the first models developed by Mercedes-Benz after the war. 2. Characteristics of the Mercedes-Benz E-Class: Comfortable ride, the saying "Drive BMW, ride Mercedes-Benz" is deeply rooted in people's hearts, average space, slightly high price, electronic equipment has minor problems, and the noble feeling and classic shape of the appearance are very satisfying to netizens.
10
0
Share

What are the turning techniques for Subject 3?

Subject 3 left turn is a wide turn. After driving out of the parking line, you cannot turn the steering wheel too much immediately, nor can you not turn it at all. The right turn is a sharp turn, which requires faster steering compared to the left turn, similar to a 90-degree turn. Below is relevant information about Subject 3: 1. Introduction to Subject 3: Subject 3, including the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. Test content of Subject 3: The driving skills test includes preparation before getting on the car, simulated light test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, driving straight through intersections, etc.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.