How to solve the abnormal noise of Roewe RX5 sunroof?

Where is the cabin air filter located in the JMC Transit?

JMC Transit's cabin air filter is located under the passenger seat. Replacement method: 1. Wait for the car engine to cool down before operation. 2. Remove the fuse box cover under the passenger seat. There are two yellow buttons that can be pressed by hand to detach. 3. After removing the outer cover, there is a vertical inner cover inside. Press the switches on both sides to remove it easily, but pay attention to the installation sequence - it must be reinstalled exactly as removed. 4. At this point, you can see the old cabin air filter. Press down the outlet wiring slightly, then twist and pull the filter outward simultaneously. Don't worry about removal difficulty as the filter has good elasticity. 5. After removing the old filter, start the car and turn on the AC at maximum fan speed to blow air through the outlet. Then install the new cabin air filter in the original position. 6. Before installation, squeeze the new filter toward the center. After installation, pull it several times to allow the filter to restore its original shape.

4

1

Share

Cadillac XT5 Transmission Fluid Specification

The transmission fluid specification for the Cadillac XT5 is SAE75W-85-API GL4. Below is an introduction to the Cadillac XT5: 1. Exterior: The Cadillac XT5 boasts a commanding presence with its exterior design. It features the brand's signature diamond-cut styling, a powerful shield-shaped grille, and dynamic, sharp headlights, exuding a luxurious and grand aura. Additionally, it offers two distinct design choices: the Premium Luxury trim, which leans towards a more business-oriented style, and the Sport trim, which is edgier and cooler, catering to consumers' individual preferences. 2. Interior: The interior design embodies classic American luxury, with impeccable materials and meticulous craftsmanship. Nearly every surface is wrapped in premium leather, complemented by matte-finish wood grain accents made from North American tiger maple, delivering outstanding texture. The upper dashboard, door panels, and sides of the central console are predominantly covered in soft-touch materials and leather, creating an upscale ambiance that is well-executed.

17

5

Share

What is the fuel consumption of the 12th-generation Focus automatic transmission?

This model typically has a fuel consumption of around 7 liters per 100 kilometers. The fuel consumption of automatic transmission vehicles is significantly higher than that of manual transmission, and the maintenance costs for the transmission are higher with a shorter service life. Driving a manual transmission can be quite troublesome due to frequent gear shifting. If there isn't much traffic, manual transmissions are more fuel-efficient. Methods to reduce fuel consumption: To achieve lower fuel consumption, owners need to maintain proper driving habits and regularly address carbon buildup in the engine. Of course, avoiding driving during traffic jams can also help reduce fuel consumption. Abnormal fuel consumption: Fuel consumption can vary, and if it suddenly increases sharply, it is highly likely due to a problem with the vehicle, and timely action is more beneficial than harmful. Exterior: Additionally, the overall appearance of the Focus is stylish and dynamic, with smooth line designs adding a sense of strength, making most owners find the car aesthetically pleasing.

15

1

Share

What are the symptoms of a faulty transmission output shaft speed sensor?

Symptoms of a faulty transmission output speed sensor are numerous. Below is a detailed introduction to the symptoms when the transmission output speed sensor malfunctions: 1. Automatic gear disengagement: Due to the axial force generated on the tooth surfaces of the meshing sliding gears or coupling sleeves during power transmission exceeding the locking force, the gears are automatically pushed from the meshing state to the neutral position. This can be caused by component wear and housing deformation generating axial force, insufficient gear meshing length, or failure of the self-locking mechanism—resulting in reduced locking force. 2. Other faults: Gear misalignment, where excessive clearance in parts related to the gear lever leads to inaccurate gear positioning. Lever vibration, which reflects radial or axial oscillation of the transmission gears on the gear lever. Difficulty in shifting, caused by the failure of synchronizer synchronizing elements or locking elements. Excessive gear meshing clearance, housing deformation causing impact, bearing damage, or insufficient and incorrect specification of lubricating oil.

10

5

Share

What are the causes of EECU failure in Dongfeng Tianlong trucks?

Dongfeng Tianlong truck EECU failure causes and troubleshooting methods are as follows: 1. When communication between the engine ECM and instrument panel is interrupted, the instrument will report this fault: This is a communication issue, possible main causes include: Loose connections at CAN bus connectors, loose connections at constant power supply connectors, or loose connections in switched power supply circuits; Inspection revealed water ingress in the stop switch wiring harness connector (close to the front wheel), with corroded pins; Solution: After rust removal and anti-rust treatment of the pins, reconnecting resolved the fault. 2. After modification by the retrofitting workshop, the engine fails to start, with the instrument reporting "Instrument-EECU communication fault": Solution: Check power supply circuit: No.45 switched power supply should be 24V, normal power supply is 24V, but sparking was observed when connecting the 4-pin connector. Measurement showed short-circuit between ECM 4-pin connector power pins and return circuit pins (normal resistance should be 5~7 kΩ), indicating internal short-circuit in ECM power circuit; Replacing the ECM resolved the fault.

16

4

Share

What is the fuel consumption of the Civic 1.5T?

The comprehensive fuel consumption of the Civic 1.5T manual transmission model is approximately 7.0 liters per 100 kilometers, while the automatic transmission model consumes about 7.7 liters per 100 kilometers. Below is some relevant information about the Civic 1.5T: 1. Engine: The Civic is a compact sedan under Honda. It is equipped with two engines: a 1.0-liter turbocharged engine and a 1.5-liter turbocharged engine. The 1.5-liter turbocharged engine in the Civic has a maximum power of 130 kW and a maximum torque of 226 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1800 to 5500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Transmission: The automatic transmission models of the Civic use a CVT (Continuously Variable Transmission), which is compact, lightweight, and known for its reliability and durability. The CVT transmission helps maintain the engine within an optimal rpm range, generally making cars equipped with CVT transmissions more fuel-efficient.

11

0

Share

How to solve the abnormal noise of Roewe RX5 sunroof?

Where is the cabin air filter located in the JMC Transit?

Cadillac XT5 Transmission Fluid Specification

What is the fuel consumption of the 12th-generation Focus automatic transmission?

What are the symptoms of a faulty transmission output shaft speed sensor?

What are the causes of EECU failure in Dongfeng Tianlong trucks?

What is the fuel consumption of the Civic 1.5T?

What are the main causes of car failures?

Does the Mazda3 Axela have tire pressure monitoring?

What is the engine model of the new Sagitar?

Can the car owner be absent during the annual vehicle inspection?