How to Solve the Abnormal Noise of Door Limiters?

1 Answers
McAngelo
07/30/25 7:06am
Solutions for abnormal noise in door limiters: 1. Check whether the design and manufacturing process are normal, and whether there are signs of rust; 2. Apply grease to the door limiter to prevent abnormal noise caused by rust or lack of lubrication. Door limiters generally refer to door opening limiters. The function of a door opening limiter is to restrict the degree to which the door can be opened. On one hand, it can limit the maximum opening of the door to prevent it from opening too wide; on the other hand, it can keep the door open when needed, such as when the car is parked on a slope or in windy conditions, preventing the door from closing automatically.
Was this review help?
3
5
Share
More Forum Discussions

What Technologies Are Used in Autonomous Driving?

Autonomous driving utilizes the following technologies: 1. Sensor Technology: Autonomous vehicles are equipped with various sensors around the car to recognize the surrounding environment, roads, and traffic conditions. 2. Chip Technology: This refers to super chips, akin to small computers, capable of processing data collected by multiple sensors and integrating them. This significantly reduces the size and cost of the vehicle's 'central computer' and makes its application in cars feasible. 3. Operating System: The computer control system combines processing results with operational hardware to achieve acceleration, deceleration, braking, parking, steering for avoidance, and human-machine interaction, among others. 4. Network Technology: For driverless cars to be road-ready, they must have internet and local area network connectivity and recognition capabilities. This includes vehicle-to-vehicle communication, satellite communication, weather forecast connectivity, and interaction with traffic command networks. These capabilities enable the car to correctly identify and choose routes, obey traffic police commands, make correct decisions at intersections, and avoid dangers to ensure safe driving.
13
2
Share

Why is the car air conditioning slow to start?

Possible causes include a damaged blower motor, a clogged air filter, a faulty air door actuator, or a stuck air blend door. Here is an introduction to car air conditioning: 1. Overview: Car air conditioning refers to the air conditioning system installed in vehicles, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. 2. Structure: It generally includes refrigeration, heating, and ventilation systems. This integrated design makes full use of the limited space inside the vehicle, featuring a simple structure and easy operation, making it the internationally popular modern car air conditioning system. 3. Layout: Different types of air conditioning systems have varying layouts. Currently, most passenger cars use a combined heating and cooling system. The typical arrangement integrates components such as the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, known as the air conditioning assembly.
17
5
Share

Meeting or Passing Vehicles?

It refers to passing, which means trains, cars, etc. traveling in opposite directions crossing at a certain point. Below are relevant introductions about passing: 1. Methods for facing passing: The passing sign, where the upward arrow represents yourself. If your arrow is large (black or white), it means you have the right of way (you go first); if your arrow is small (red), it means you must yield (the other party goes first). Proper passing requires preparation in advance to avoid psychological panic and operational confusion during passing. 2. Regulations to follow: On roads without centerlines, narrow roads, or narrow bridges, you should slow down and pass on the right, paying attention to the safety of non-motorized vehicles and pedestrians. When passing is difficult, the party with the condition to yield should let the other party go first. On obstructed road sections, the party with the obstruction should yield. On narrow slope sections, the party with the obstruction should yield, etc.
1
5
Share

How much to turn the steering wheel when making a left turn at an intersection?

When turning at an intersection, the amount of steering wheel turn depends on the size of the turn. The smaller the intersection, the greater the angle of the steering wheel turn for a left turn. Turning too much at a large intersection may lead to driving in the opposite direction, especially when making a left turn across two or three lane lines. If the vehicle is in the right lane line and the steering wheel is turned too much, it may affect the left-turning vehicles on the left. The correct method is to first turn the steering wheel slightly less than half a turn, and if it feels insufficient, add a little more to make it just right. Below are some techniques for turning at intersections: 1. Turn the steering wheel one full turn for a left turn. 2. For a small left turn intersection, turn the steering wheel one full turn, and add a little more if it's not enough. 3. For a large left turn intersection, first turn the steering wheel half a turn, and add a little more if the angle is insufficient.
16
4
Share

How long does it usually take to practice for the automatic transmission driving test (Subject 3)?

Subject 3 generally requires about 3-4 days of practice before you can schedule the test. More information about Subject 3 is as follows: 1. Overview: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle license. 2. Test Content: The road driving skills test for Subject 3 generally includes: preparation before getting on the car, simulated light test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, etc.
1
2
Share

Should You Press the Brake When Engaging the Clutch for Starting?

When starting the car, it is necessary to press the brake pedal while engaging the clutch, primarily to prevent the car from rolling forward. This starting sequence of pressing both the clutch and brake should be followed whether driving on flat roads or steep slopes, mainly for safety reasons. Relevant information is as follows: 1. Starting: On flat roads, you can directly press the clutch without needing to press the brake, relying on the clutch to control the car's speed. Once the car starts moving, you can fully release the clutch. If the car is on a slope, it is best to press the clutch while also pressing the brake to prevent the car from rolling back or suddenly lurching forward. 2. Note: When not pressing the brake, you can use the handbrake. Once the car's semi-engagement point is found, releasing the handbrake will prevent the car from rolling back. The primary function of the car's clutch is to ensure a smooth start, so for the safety of the car, it is essential to follow driving rules when operating the vehicle.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.