How to Solve Resonance Noise in Car Audio?

1 Answers
SebastianRose
07/30/25 4:32am
Solutions for car audio resonance noise: 1. Redo the full car sound insulation: Some car audio resonance is caused by poor sound insulation measures, and redoing the full car sound insulation can solve the problem; 2. Replace the audio system: Resonance caused by poor audio quality requires professional repair or replacement of the audio system; 3. Install an equalizer: After installing an equalizer, the sound should be set at around 70%; 4. Adjust the amplifier frequency points: Generally, the front sound field amplifier should be set between 80Hz to 120Hz, the rear sound field amplifier between 200Hz to 350Hz, and the subwoofer amplifier between 80Hz to 120Hz.
Was this review help?
15
0
Share
More Forum Discussions

Is Mobil Super 2000 Fully Synthetic or Semi-Synthetic?

Mobil Super 2000 is semi-synthetic. Here are the specific differences between fully synthetic and semi-synthetic engine oils: 1. Different base oils: Semi-synthetic oils use Group III base oils; fully synthetic oils are blended from Group III, IV, and V base oils. Fully synthetic oils use higher-grade base oils than semi-synthetic oils. 2. Different replacement intervals: Semi-synthetic oils should be replaced every six months or 7,500 kilometers; fully synthetic oils should be replaced every year or 10,000 kilometers. 3. Different operating temperatures: Fully synthetic oils have a wider operating temperature range. Under the same working conditions, fully synthetic oils can protect the engine with lower viscosity, while semi-synthetic oils have relatively higher requirements.
11
0
Share

Can Scratches from Tree Branches Be Repaired?

Can be repaired. Methods to address scratches caused by tree branches on a car are as follows: 1. Method one: For light surface scratches, apply scratch wax or polishing wax to a towel and rub the scratched area repeatedly to resolve minor scratches. 2. Method two: Toothpaste contains abrasives and can be used for small surface damages and light scratches. 3. Method three: Use a touch-up paint pen for remedy; touch-up paint pens are commonly used tools for car owners to repair scratches themselves. 4. Method four: For relatively deep scratches that haven't exposed the primer, use fine sandpaper to grind and then polish to resolve. If the scratches are deep and have exposed the primer, the better approach is partial paint repair, which helps preserve as much of the original factory paint as possible.
10
1
Share

What to Pay Attention to When Your Car is Recalled

Determine the issue with your vehicle. Below are the relevant points to note when your car is recalled: Confirm the vehicle issue: After receiving the "Defective Automobile Product Recall Notice" from the manufacturer, assess the severity of the vehicle defect and conduct an inspection. Contact the 4S shop: Even if there are no apparent issues with the vehicle, contact the nearest 4S shop to schedule the recall implementation. Relevant authorities: During the recall process up to the vehicle replacement, if any issues arise, you can directly contact the relevant department of the 4S shop handling the recall for inquiries. Check for faults: After receiving the vehicle post-recall repair, inspect it to ensure the fault has been resolved.
8
5
Share

How to reset the maintenance reminder light on a KX?

To reset the maintenance reminder light on a car, follow these steps: 1. Turn off the ignition switch. 2. Press and hold the trip meter reset button on the instrument cluster. 3. Turn on the ignition switch. 4. The odometer display will start counting down. When the display shows 0000.0, release the button to reset the maintenance reminder light. Below is the purpose of the maintenance reminder light: It alerts the owner that the car requires maintenance. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing.
20
4
Share

Which is brighter, LED or matrix LED?

Matrix LED is brighter than regular LED. The difference between matrix LED and regular LED lies in the number of light beads. A standard LED headlight usually has two sets of lamp groups, with one group designated as low beam and the other as high beam. In contrast, matrix LED headlights further divide multiple groups of LED beads within the left and right lamp groups. Based on LED headlights, they provide more refined control over individual LED beads. Additional information: Matrix LED high beams contain 5 light beads, while regular LEDs only have 2. A special feature of matrix LEDs is their ability to turn off corresponding high beams based on distant light sources. Another difference is the flashing pattern of turn signals - matrix LEDs display dynamic patterns, whereas regular LEDs flash on and off like conventional turn signals.
19
1
Share

Is the car directly transferred when sold to a 4S store?

The car is not directly transferred when sold to a 4S store. Here is an introduction to the relevant content of 4S stores: Services of 4S stores: 4S stores provide used car recycling services to facilitate car owners in selling their vehicles. The transfer can only be completed after the 4S store officially sells the car and finds a buyer. Introduction to 4S stores: The full name of a 4S store is Automobile Sales Service 4S store (Automobile-Sales-Servicshop-4S). It is a car sales enterprise that integrates four functions: vehicle sales (Sale), spare parts (Sparepart), after-sales service (Service), and information feedback (Survey).
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.