How to Solve Idle Vibration in Civic?

2 Answers
DeCorey
07/24/25 10:40pm
Civic idle vibration solutions: 1. Clean engine carbon deposits, common carbon cleaning includes throttle carbon cleaning, spark plug carbon cleaning, fuel injector carbon cleaning, and cylinder carbon cleaning; 2. Clean or replace air filter, fuel filter, and oil filter as needed; 3. Spark plugs and fuel injectors can be cleaned or replaced, new fuel injectors require computer matching and must be disassembled and installed in order. Causes of Civic idle vibration: 1. Severe carbon deposits inside the engine; 2. Ignition system issues; 3. Unstable fuel pressure; 4. Aging of internal engine components. Taking the Civic 2019 180TURBO CVT Shangyue Edition as an example, its powertrain is equipped with a 1.5t inline four-cylinder turbocharged engine, with a maximum power of 92kw, maximum torque of 173nm, matched with a continuously variable transmission, and front-wheel drive.
Was this review help?
13
5
Share
AdamLynn
08/10/25 3:07pm
I've been driving my Civic for over three years now. Last time, the idle was shaking so badly it gave me a real scare. I immediately pulled over to check, starting with the simplest thing: I pulled out the spark plugs and saw they were all blackened and worn out. I tried replacing them with a new set, and the shaking improved significantly. But it wasn’t completely fixed, so I went ahead and cleaned the throttle body—there was a thick layer of carbon buildup. It took me about half an hour to do it myself. Later, I noticed the engine mount was a bit worn out, so I went to the shop and replaced it with a new one. Now, the idle is rock steady and gives me peace of mind. Honestly, idle shaking is just a minor issue—the Civic is a tough car. The key is regular maintenance; don’t slack off. Don’t skimp on things like changing the air filter either, or you might end up with dangerous shaking on the highway. Pay attention to your car’s condition, and it’ll take you much farther.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

Is Leopard Sedan a Domestic or Joint Venture Brand?

Leopard is an independent brand, and the vehicles under this brand are domestic cars. More information about Leopard is as follows: 1. It is a product of Hunan Changfeng (Group) Co., Ltd. and Hunan Changfeng Automobile Manufacturing Co., Ltd. 2. Leopard Automobile is one of the largest light off-road vehicle manufacturers in China. With over 60 years of military-industrial tradition and more than 30 years of automobile manufacturing experience, it inherits the quality advantages accumulated through years of military production and integrates advanced technical expertise gained from joint venture collaborations. Leopard provides users with high-quality SUV and pickup truck products, covering various segments such as government official vehicles, military command vehicles, commercial vehicles for industries, and personal family cars. It enjoys high brand recognition and a strong market reputation. 3. Leopard Automobile adheres to a focused development strategy, with "Professional and Versatile" as its brand philosophy. It has established specialized products, markets, technologies, and exclusive sales channels based on the two major categories of SUVs and pickup trucks, aiming to build itself into an expert brand in SUVs and pickups.
9
5
Share

At what tire pressure level is it unsafe to drive?

Standard car tires should not be driven if the pressure falls below 2.0 bar. According to the international GBT2978-2008 standard, the recommended tire pressure for standard tires is 2.4-2.5 bar. In winter, tire pressure should be slightly increased by about 0.2 bar based on the standard tire pressure. In summer, the lower limit of the standard tire pressure is generally sufficient, such as 2.4 bar for standard tires. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent blowouts due to high temperatures. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure monitoring system. If a puncture is found during inspection, drive to a tire repair shop promptly for a patch and then reinflate the tire. If the tire pressure warning reappears some time after inflation without any visible puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and replace it if necessary.
10
3
Share

Which One on the Dashboard is the Tachometer?

The tachometer is located within the instrument cluster, symmetrically placed opposite the speedometer. It operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted. These signals are then converted into a displayable rotational speed value. Detailed descriptions are as follows: 1. The tachometer unit is 1/min×1000, indicating how many thousand revolutions the engine makes per minute. The one with a 'km' mark is the odometer, while the tachometer typically displays numbers from 1 to 8, where the pointer's position multiplied by 1000 represents the engine's RPM. 2. The tachometer visually displays the engine's RPM under various operating conditions, allowing the driver to monitor the engine's performance, determine the optimal shifting timing to match the gear and throttle position, thereby maintaining optimal working conditions, reducing fuel consumption, and extending the engine's lifespan. 3. There is a red zone on the tachometer, usually indicating RPMs above 6000. At excessively high RPMs, the engine's lubrication and cooling efficiency decrease, and the RPM may exceed the tolerance of engine components, potentially causing damage. Early vehicle tachometers featured a redline zone to alert drivers. 4. Under extreme operating conditions, the engine may activate fuel cut-off as a protective measure. However, high-performance models or basic manual transmission vehicles may have higher tolerance for engine limits, requiring drivers to assess engine conditions based on the safe zone.
8
0
Share

What to Do When Car Paint Peels?

When car paint peels, it should be addressed at a professional auto body shop or 4S store. Generally, the peeling area needs to be cleaned and sanded smooth before reapplying clear coat. It is also advisable to wax the car afterward to better protect the paint. The reasons for paint peeling are analyzed as follows: 1. Poor surface preparation, contaminated by wax, grease, water, or rust. 2. No metal surface treatment was applied to the steel or aluminum surface, or the wrong type of treatment was used. 3. The substrate surface temperature was too high or too low during painting. 4. Improper application of primer, use of incorrect or poor-quality thinner. 5. Excessive compressed air pressure.
2
2
Share

What are the functions of engine oil in the lubrication system?

Here are several functions of engine oil in the lubrication system: 1. Lubrication: Reduces friction resistance and wear, decreasing engine power consumption. 2. Cleaning: Cleans friction surfaces by carrying away wear debris and other foreign particles. 3. Cooling: Dissipates heat generated by friction, providing a cooling effect. 4. Sealing: Enhances sealing performance, helping to prevent gas or oil leaks. 5. Anti-corrosion: Protects component surfaces to prevent corrosion and rust. 6. Hydraulic function: Lubricating oil can serve as hydraulic oil, such as in hydraulic lifters, performing hydraulic functions. 7. Vibration damping: Absorbs impacts and reduces vibrations, providing a damping effect.
20
5
Share

What car has the Tang character as its logo?

The car with the Tang character logo refers to BYD's Tang, a mid-size SUV under the BYD brand. The dimensions of this car are 4870 mm in length, 1940 mm in width, and 1720 mm in height, with a wheelbase of 2820 mm. The Tang series is equipped with a 2.0-liter turbocharged engine. Relevant information about BYD cars is as follows: 1. The 2.0-liter turbocharged engine in the BYD Tang delivers 192 horsepower and a maximum torque of 320 Nm. This engine can output maximum power at 5500 rpm and maximum torque between 1500 to 4000 rpm. 2. The engine in the BYD Tang features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The front suspension of the BYD Tang uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.