···
Log in / Register

How to Solve Honda Engine Vibration?

4 Answers
LaEmmett
07/29/25 8:30pm

The most common cause of car vibration is a dirty throttle body or excessive carbon buildup in the fuel injectors. Cleaning the fuel system and removing carbon deposits is recommended. Check the condition of the spark plugs, high-voltage wires, and ignition coils. Inspect if the spark plugs have excessive carbon buildup and replace them if necessary. If you have already cleaned the engine carbon deposits and replaced the spark plugs but still notice body vibration at idle, it is advisable to visit a 4S shop to check the fuel supply pressure.

Was this review help?
12
3
Share
StAndrew
08/14/25 5:25pm

My Honda Civic has been running for over 5 years, and the engine vibration is particularly annoying. The most common cause is uneven ignition due to aging spark plugs, leading to unstable combustion. I've encountered this situation before - first I checked if the ignition coils were damaged, and after replacing the spark plugs, the vibration reduced significantly. If the vibration is noticeable during idling, it might be due to excessive carbon buildup affecting cylinder operation. Cleaning the throttle body and fuel injectors can make a big difference. Regular maintenance is crucial - for example, replacing the air filter and oil filter every 50,000 km can prevent many issues. Safety-wise, vibration makes driving unstable, especially at high speeds where the risks are greater. I recommend getting a comprehensive diagnosis at the 4S shop promptly - spending a little money is better than having an accident. Remember, don't push your luck - professional repair is the right way to go.

Was this review help?
13
2
Share
Expand All
ColinDella
10/16/25 4:52am

As a hands-on young enthusiast, I immediately troubleshoot when my Honda engine starts shaking. I start with the simplest checks: open the hood to inspect the spark plugs - if they're blackened, replace them (Honda spark plugs typically last about 40,000 km). Next, check if the air filter is clogged; either clean it with compressed air or replace it, which is inexpensive. For the fuel system, verify the fuel pump pressure is normal - shaking can sometimes stem from poor fuel injection. Adding a bottle of fuel system cleaner to remove carbon deposits might solve it. I've handled this multiple times myself and found that minor issues can be fixed at home, saving both money and time. However, for serious cases, I still visit the repair shop since professional equipment provides more accurate ignition circuit diagnostics. Never overlook safety details.

Was this review help?
2
0
Share
Expand All
VanFinn
11/29/25 5:40am

When encountering Honda engine vibration, I believe the first step is to identify the root cause. Common issues like faulty ignition coils causing misfires can lead to a cylinder shutting down, resulting in overall vehicle shaking. During inspection, I usually use a multimeter to check for voltage stability - if the coil is bad, replace it immediately. Fuel supply problems such as clogged injectors or dirty filters can also cause vibrations, which can be resolved by cleaning or part replacement. Another potential culprit is worn engine mounts - older Honda models are prone to cracked rubber mounts, and poor fixation exacerbates vibrations. I recommend prompt inspection to prevent worsening conditions. While DIY maintenance is possible for those with mechanical skills, consulting a professional mechanic for diagnosis is more reliable.

Was this review help?
1
4
Share
Expand All
More Forum Discussions

What does 20t stand for?

20T represents a 1.5T power configuration, which means a 1.5-liter turbocharged engine. The 't' indicates that it is equipped with a turbocharged engine. An engine is a machine that can convert other forms of energy into mechanical energy. It originated in the UK and is not only used in power generation devices but also in complete machines, including power units. Engine types include internal combustion engines (gasoline engines), external combustion engines (such as Stirling engines, steam engines, etc.), and others. An external combustion engine refers to an engine where the fuel burns externally, and the engine converts the thermal energy generated by this combustion into kinetic energy. The steam engine improved by Watt is a typical example of an external combustion engine. The term '20t' here stands for 20 tons, where 't' = Ton. Models like balers often have specifications such as 20T, 50T, 120T, etc.
2
3
Share

What is the 0-100km/h acceleration time of the Binrui 1.4T?

The 0-100km/h acceleration time of the Binrui 1.4T is 10.4 seconds. The Binrui model is positioned as a compact car. In terms of body dimensions, the car measures 4680mm in length, 1785mm in width, and 1460mm in height, with a wheelbase of 2670mm. The Binrui adopts a family-style interior design, featuring a 10.25-inch central control screen and a 7-inch LCD instrument panel. It is equipped with two different engines: a 1.0T and a 1.4T. The Geely Binrui adopts a very youthful design style, with a fastback roof and sporty high waistline design becoming its signature exterior features. In terms of configuration, the high-end version of the Binrui is equipped with full LED headlights, ACC adaptive cruise control, a rearview camera, and 17-inch wheels.
20
2
Share

Why is there no hot air in the car?

The reasons why the car has no hot air: 1. The engine thermostat fails; 2. The hot water valve or the vacuum driver of the hot water valve fails; 3. The heater inlet and outlet pipes are blocked or the heater core is clogged with dirt; 4. The temperature control damper or the control cable is damaged; 5. The air conditioner blower is damaged or the blower control circuit fails; 6. The air conditioner air distribution pipeline is blocked or leaks. The heat sources used by car heating equipment are divided into non-independent heating systems and independent heating systems. Non-independent heating systems use the waste heat of car exhaust or the waste heat of the engine cooling circulation as the heat source and introduce it into the heat exchanger. The fan blows the air inside or outside the car through the heat exchanger to heat it up. Independent heating systems are generally composed of a combustion chamber, a heat exchanger, a fuel supply system, an air supply system, and a control system.
9
1
Share

What type of engine oil should be used for the Honda Vezel 1.5?

Honda Vezel 1.5 is recommended to use semi-synthetic or higher grade engine oil. You can use semi-synthetic or higher grade engine oil with a viscosity of 5W40. This vehicle requires approximately 4L of engine oil. The engine oil used in the car should be selected according to the car's manual and also determined based on the car's usage conditions. The Vezel is the first SUV under GAC Honda. The Vezel offers six body colors: Taffeta White, Silk Silver, Obsidian Blue Pearl, Tango Red Pearl, Rose Black, and Ocean Blue. Through different combinations of interior and exterior colors, it further highlights its versatile charm. Inspired by the shape of a two-door coupe, the Vezel features a hidden rear door handle design, significantly enhancing its dynamic and stylish product personality.
5
4
Share

What car has three Ls?

The logo with three Ls belongs to Lifan Motors from Chongqing. Lifan Motors is located in the Chongqing Automobile Industrial Park. "Innovation, Export, and Reputation" have always been the company's business philosophy. Lifan's first product was named the Lifan 520. Its main models include: Lifan 320, Lifan 330, Lifan 620, Lifan 720, Lifan 820, and Lifan X50, among others. In response to the national initiative to upgrade from "Made in China" to "Created in China," Lifan Motors adheres to the path of independent research and development. Product development primarily adopts joint development and technology acquisition methods, obtaining independent intellectual property rights through ownership of technology. This approach helps Lifan Motors overcome industrial competition barriers, achieve sustainable development, create core strategic resources, and secure broad growth opportunities. During the process of independent development, Lifan also places great emphasis on protecting intellectual property rights. To date, Lifan has been granted over 70 patents.
19
1
Share

What are the engine specifications of the Grand Commander?

The engine specifications of the Grand Commander are as follows: equipped with a low-power version of a 2.0L inline 4-cylinder turbocharged engine, paired with a 9-speed automatic manual transmission, delivering a maximum power of 172KW, maximum horsepower of 234PS, maximum torque of 350NM, maximum power speed of 5000RPM, maximum torque speed ranging from 2500 to 4500RPM, with all fuel delivery systems being direct injection. The body dimensions of the Grand Commander are: length 4873mm, width 1892mm, height 1738mm, with a wheelbase of 2800mm. The Grand Commander comes with 7 seats in all configurations, and offers two drive modes: one is an on-demand four-wheel drive, and the other is front-wheel drive. In terms of suspension, it features a front MacPherson independent suspension and a rear multi-link independent suspension.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.