···
Log in / Register

How to Solve High Fuel Consumption in Diesel Vehicles?

5 Answers
TimothyLee
07/29/25 1:11pm

During the operation of diesel engines, polymer deposits adhere to valves, valve seats, fuel injectors, and piston tops. These carbon deposits increase fuel consumption and should be promptly removed. When diesel generator sets operate under overload conditions, they emit black smoke due to the incomplete combustion of fuel. Conduct regular or irregular mechanical inspections and perform frequent maintenance and repairs.

Was this review help?
11
5
Share
KinsleyDella
08/14/25 3:01am

I found my diesel car consuming too much fuel and came up with several solutions. First, I needed to change my driving habits – rapid acceleration and hard braking consume the most fuel, while maintaining a steady speed is the most economical. Then, I checked the tire pressure; low pressure is like dragging your feet, causing fuel consumption to soar. Regularly replacing the air filter is also crucial; if it's clogged, the engine has to work harder. Another issue is fuel quality; poor-quality diesel doesn’t burn efficiently, so I started refueling only at reputable gas stations. Lastly, avoid idling while waiting – if it exceeds 3 minutes, just turn off the engine. These simple and practical tips don’t cost much but effectively reduce fuel consumption, as I’ve personally tested.

Was this review help?
3
2
Share
Expand All
DiBenjamin
08/14/25 3:03am

I've been driving a diesel pickup for transportation for over a decade, and fuel consumption issues are common. First, check the fuel injection system—clogged diesel injectors are the most critical issue; cleaning them once can save a lot of fuel. Insufficient fuel pump pressure also leads to poor atomization, so I recommend getting the fuel pressure tested at a repair shop. Aging seals on high-pressure fuel lines can cause leaks and should be replaced regularly. I perform fuel system cleaning every year, especially after long trips. Engine carbon buildup requires specialized additives for cleaning, and choosing the right brand is crucial. Don't skimp on these maintenance tasks to save small amounts of money, or you'll face higher repair costs later.

Was this review help?
7
0
Share
Expand All
EvelynRose
10/09/25 8:22am

High fuel consumption in diesel engines may indicate hidden mechanical faults. I once encountered a failed turbocharger seal ring, which caused insufficient air intake and incomplete combustion, immediately increasing fuel consumption by 20%. A stuck EGR valve can also lead to excessive exhaust gas recirculation, requiring disassembly and cleaning. A clogged diesel filter can cause poor fuel supply and needs replacement every three months. A malfunctioning oxygen sensor is the most easily overlooked issue; it disrupts the air-fuel ratio, and once the computer reports a fault code, immediate repair is necessary. Additionally, clutch slippage results in significant power loss and a sharp rise in fuel consumption. For these complex issues, it's advisable to visit a specialized repair shop for diagnosis with professional equipment.

Was this review help?
12
2
Share
Expand All
LaElliott
11/23/25 2:49am

To improve diesel vehicle fuel efficiency, start with driving habits. I noticed that overloading by 300kg during delivery increases fuel consumption by 1 liter. Using S mode to lock lower gears on hilly sections actually saves fuel. Driving with windows open at highway speeds consumes more fuel than using AC - 80km/h is the ideal speed for AC use. After cold starts, wait for RPM to stabilize before driving (max 30 seconds). Maintaining tire pressure 0.2bar above manufacturer standards reduces rolling resistance for better mileage. Implementing these details can reduce fuel consumption by 15% while extending engine life.

Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to deal with sticky substances on the car body?

Use a hot towel soaked in soapy water to wipe, or you can also use household cleaning products with cleaning effects. Mix soap with a small amount of ammonia and turpentine to remove adhesive marks. Use sticky transparent tape to repeatedly stick and peel off, which can remove some surface residue. A little diluted sodium water can wipe it off easily, or paint thinner can also be used. You can use a hair dryer to dry it, and then gently scrape it off.
10
5
Share

How to jump-start an Audi Q5 battery?

First, open the engine hood of your car. There is a switch under the steering wheel, then open the front hood and locate the battery inside. First, connect the red cable to the positive terminal of the dead battery, then connect it to the positive terminal of the rescue vehicle. Next, connect the negative terminal of the rescue vehicle to the negative terminal of the dead battery. After starting the engine of the rescue vehicle and then starting the engine of the dead vehicle, first remove the positive cable, then remove the negative cable.
15
3
Share

How to set the audio equalizer for Audi Q5?

The treble and bass settings can be adjusted by rotating the push-and-turn control knob. The modified settings only apply to the currently active audio source. Press the push-and-turn control knob. Rotate the push-and-turn control knob left/right until the desired position is reached. Press the push-and-turn control knob again. Rotate the push-and-turn control knob left/right until the desired position is reached. All speakers in the vehicle are activated. Front: Only the front speakers in the vehicle are activated. Rear: Only the rear speakers in the vehicle are activated.
3
4
Share

Where is the spark plug located on the Baojun 730?

Location of the spark plug on the Baojun 730: The spark plug is installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables. However, over the past decade, most car engines have been updated to feature direct connections between the ignition coil and the spark plug. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark that ignites the air-fuel mixture in the cylinder.
4
0
Share

How to Connect Phone Navigation in Audi?

Turn on the Bluetooth in the car and also enable the Bluetooth on your phone. Once Bluetooth is activated, use your phone to search for the car's Bluetooth. After finding the corresponding Bluetooth device, proceed to pair them. During pairing, you will need to enter a password, which is usually the default password. If you don't know the password, you can refer to the car manual. After entering the password, the pairing will be successful, and you can then use navigation on the car's computer system. If your phone and the car's navigation system are not compatible, further troubleshooting may be required.
10
1
Share

How to Fix a Broken Window Switch?

There is a button on the center console that prevents the windows from rolling up or down. When pressed, three window switches become inoperable. Press the button down to cut power, then press it again to release. Accumulated debris, such as small cards inserted into the window, can cause issues. In this case, simply visit a repair shop to have the door panel removed and cleaned. Aging or short-circuiting of the window regulator circuit can lead to switch failure. If the regulator itself is malfunctioning, replacement is necessary. It is recommended to visit a 4S shop for replacement.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.