How to Solve Frozen Brake Pads?

What does it mean when the TC light comes on in the car?

TC stands for Traction Control System, which improves the vehicle's passability. When the ABS anti-lock system detects wheel slippage, it applies braking to the slipping wheel to prevent loss of traction. Below is relevant information about the Traction Control System: 1. Purpose: The Traction Control System, also known as the Track Control System. When braking on slippery surfaces, wheels may skid, potentially causing loss of directional control. Similarly, during acceleration or sudden acceleration, drive wheels may also skid, posing dangers like loss of control on icy or slippery roads. The Traction Control System is designed to address these issues. 2. Preventing Slippage: The Traction Control System relies on electronic sensors to detect when the driven wheel speed is lower than the drive wheel (indicating slippage), then sends signals to adjust ignition timing, reduce throttle opening, decrease acceleration, downshift, or apply wheel braking to stop the slippage. 3. Improving Stability: The Traction Control System not only enhances driving stability but also improves acceleration and climbing capability.

6

0

Share

What is the general ground clearance of a sedan?

The minimum ground clearance of a sedan typically ranges between 100mm and 150mm. Here are some details about ground clearance: 1. For ordinary family sedans: As long as there are no steep slopes, deep potholes, or obstacles on the road, a large ground clearance is generally not required. It should ensure the comfort and stability of the vehicle. 2. For sports cars: The ground clearance is usually around 100mm. The low ground clearance in sports cars is designed to improve tire grip, enhance speed, and ensure stability during high-speed cornering. High-speed cornering stability refers to avoiding skidding or rollover. 3. Larger ground clearance: Better off-road capability and easier parking. A higher ground clearance not only improves performance on gravel or mountainous roads but also prevents water from entering the exhaust pipe when driving through flooded areas. It also makes parking on curbs or uneven parking spots more convenient. Smaller ground clearance results in a lower center of gravity but poor off-road capability, making it difficult to drive on gravel or dirt roads.

10

2

Share

How to Identify Front-Wheel Drive vs Rear-Wheel Drive?

To distinguish between front-wheel drive and rear-wheel drive, observe the position of the front wheels. The identification methods are as follows: 1. If the rear end of the front wheels is very close to the vehicle's A-pillar: Then this car must be a front-wheel-drive vehicle, as front-wheel-drive cars typically have a transversely mounted engine and transmission. 2. If the rear end of the front wheels is relatively far from the A-pillar: Then this car is likely a rear-wheel-drive vehicle. Rear-wheel-drive cars usually feature a longitudinally mounted engine and transmission, with the axle positioned further forward to ensure ample cabin space. 3. In terms of cost-effectiveness: Front-wheel-drive vehicles generally have lower manufacturing costs and a more affordable entry price, which is why most A-segment cars and mid-to-low-priced B-segment cars are front-wheel drive. Compared to rear-wheel-drive cars, front-wheel-drive vehicles typically integrate the final drive and differential into the transmission, eliminating the need for a driveshaft to the rear wheels. This results in higher power transmission efficiency, lighter body weight, and better fuel economy.

18

2

Share

Which company owns McLaren?

McLaren is an independent brand and a British sports car manufacturer. Here is some related information about McLaren: 1. The McLaren Group is headquartered in Woking, UK. The most famous sports car under McLaren Automotive is the McLaren F1, which accelerates from 0 to 100km/h in just 3.2 seconds. As a supercar, it was once the fastest production car in the world, holding this record from 1994 to 2005, making it the longest-held record for a production sports car; 2. The McLaren F1 incorporates a significant amount of F1 racing technology. In terms of power, the F1 is equipped with a 6.1-liter 60° V12 engine, model S70/2. It's worth noting that this engine was provided by BMW; 3. A total of 107 units of the McLaren F1 were produced, with 65 sold as street-legal sports cars. As the flagship sports car under McLaren Automotive, the McLaren F1 can be considered one of the greatest sports cars ever made.

4

3

Share

Is it acceptable to stamp the same engine number when replacing an engine?

It is not acceptable to stamp the same engine number when replacing an engine. If a new engine is installed with a different engine number, the vehicle registration must be updated accordingly with the new engine number. Below is an introduction to the engine stamping number: 1. Positions 1-3 (WMI): World Manufacturer Identifier, indicating the manufacturer of the vehicle; 2. Positions 4-8 (VDS): Represent vehicle characteristics, including type, series, body style, engine type, and restraint system type; 3. Position 9: Check digit, used to prevent input errors through a specific algorithm; 4. Position 10: Model year, which is the year designated by the manufacturer (Model Year) and may not necessarily match the actual production year, though the difference is typically no more than one year; 5. Position 11: Indicates the assembly plant; 6. Positions 12-17: Sequential number. Generally, vehicle recalls target a specific range of sequential numbers, meaning a particular batch of vehicles.

15

5

Share

What are the precautions for using automotive antifreeze?

Precautions for using antifreeze: 1. Do not mix different types of antifreeze: Different types of antifreeze have different freezing points due to their varying compositions. Therefore, antifreeze should be selected based on the temperature conditions of the vehicle's operating environment. Generally, the freezing point of the antifreeze should be 10~15°C lower than the local minimum temperature to prevent the antifreeze from losing its antifreeze function. 2. Do not dilute with water: Avoid diluting antifreeze with tap water. Antifreeze mixed with tap water will not only have an increased freezing point but will also gradually produce sediment due to the impurities in tap water, ultimately affecting the cooling system's performance. 3. Do not directly add concentrated antifreeze: The concentration of ethylene glycol in antifreeze is not necessarily better when higher. Directly adding high-purity concentrated antifreeze not only fails to meet the engine cooling system's requirements for antifreeze but may also lead to unexpected issues such as antifreeze deterioration, increased low-temperature viscosity, and engine overheating. Therefore, when using concentrated antifreeze, it must be mixed according to the specified requirements, and direct use is prohibited. 4. Regularly check the antifreeze level: The antifreeze level in the engine compartment's reservoir should be checked every quarter. The normal level should be between the MAX and MIN marks. If it is below the MIN mark, the same brand and model of antifreeze should be replenished promptly.

18

5

Share

How to Solve Frozen Brake Pads?

What does it mean when the TC light comes on in the car?

What is the general ground clearance of a sedan?

How to Identify Front-Wheel Drive vs Rear-Wheel Drive?

Which company owns McLaren?

Is it acceptable to stamp the same engine number when replacing an engine?

What are the precautions for using automotive antifreeze?

How to Check if a Car Meets China 5 or China 6 Emission Standards?

What does the AUTOHOLD button in a car mean?

Is the first maintenance of a new car free?

Vehicle Chassis Loose with Rattling Noise