How to Solve Foggy Windows?

1 Answers
DeVictoria
07/29/25 6:38pm
Press the defogging button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and activate the external circulation to defog. Both cold and warm air can be used to defog car windows, but warm air works slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving defogging. The method of using warm air is the same as using cold air, but it's important to note that warm air should not be used on rainy days as it can initially worsen the fog. Always use external circulation when defogging car windows. The reason for foggy car windows: There is a temperature difference between the inside and outside of the car. If the temperatures inside and outside are different, the side with the lower temperature will have a lower saturated vapor pressure on its surface compared to the surrounding environment, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on promptly, the exhaled air has high humidity, quickly causing the windshield to fog up. At this point, turn on the air conditioning to blow cold air onto the windshield, using the dehumidifying function to remove the fog quickly. If the humidity is too high and the air conditioning is not effective, slightly open the windows to rapidly reduce the humidity inside the car. Combining this with the air conditioning can speed up the process. Air Conditioning Heating: Use the method of reducing the temperature difference to remove fog. In winter, blow warm air onto the glass to quickly raise the temperature of the windshield and reduce the temperature difference between the inside and outside surfaces, preventing excessive fogging. However, it should be noted that the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Avoid setting the temperature to the coldest position, as this can cause frost to form on the outside of the windshield over time. Applying Anti-Fog Spray: Spray a small amount of defogging agent onto the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog. This is especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying, let it dry and then wipe off any excess with a chamois or soft dry cloth. This can keep the windows fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, open the side windows to create airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating the fog. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows is obvious—it cannot be used during rain, snow, on highways, or when the fog is heavy. Rear Window Heating: Most cars have a rear window heating function, though the button location may vary. Turn on the rear window heating switch, and the fog will disappear in about a minute.
Was this review help?
3
2
Share
More Forum Discussions

What's the Difference Between 1.5T and 2.0T?

1.5T displacement is 1.5L; 2.0T displacement is 2.0L. The main differences between 1.5T and 2.0T are as follows: 1. Displacement: The displacement of a 1.5T engine is 1.5 liters; the displacement of a 2.0T engine is 2.0 liters. 2. Power: For the same brand and model, the 2.0T engine delivers stronger power compared to the 1.5T. 3. Road condition adaptability: The 1.5T performs better in daily city driving; the 2.0T excels in high-speed driving. On highways, the 2.0L engine consumes more fuel, while the 1.5T, with its smaller displacement and turbocharging, provides a noticeable power boost and naturally lower fuel consumption.
18
4
Share

Why does the engine speed rise abnormally when the accelerator is pressed?

Because a dirty throttle position sensor or voltage imbalance can cause electronic throttle failure, resulting in the situation where the speed does not increase even when the accelerator is fully pressed. Below is a related introduction about throttle speed: 1. Cause: The reason is that the torque converter is not locked. The throttle controls the opening of the throttle valve, affecting the engine's air intake. After pressing the accelerator, the amount of fresh air entering increases, and the fuel injection amount controlled by the ECU also increases, thus the force generated by combustion increases, pushing the engine's operating speed to rise. 2. Principle: Pushing the engine's operating speed to increase. Under normal circumstances, when the engine speed, vehicle speed, and throttle depth reach a certain level, the torque converter will lock. Before it locks, it is easy to encounter the situation where pressing the accelerator results in the engine roaring but the car not moving.
13
3
Share

Why was the h6 diesel version discontinued?

Diesel version cars are not popular in the market, and their fuel consumption is relatively high, leading to fewer buyers and manufacturers shutting down production lines. Below is relevant information about the h6: 1. Target audience: The Haval H6 is aimed at SUV enthusiasts, those looking to purchase or upgrade their vehicles, individuals with multifunctional vehicle needs, and potential buyers in the 10-150,000 RMB sedan market. Currently, more and more customers are favoring SUVs, and this shift in preference is spreading from developed coastal cities to second and third-tier cities. 2. Model highlights: The Haval H6 is positioned as an urban SUV, offering both two-wheel drive and four-wheel drive options. The H6 is built on a new platform different from the previous H3 and H5 models, with its main feature being the use of a unibody structure. The four-wheel-drive version of the H6 employs an on-demand four-wheel-drive system.
9
2
Share

Can Sedans Drive on the Qinghai-Tibet Highway?

Qinghai-Tibet Highway has good road conditions, and sedans can pass through. Here is additional information: 1. Qinghai-Tibet Highway: The Qinghai-Tibet Highway starts from Xining City in Qinghai Province in the east and ends at Lhasa City in Tibet in the west. Construction began in 1950, and it opened to traffic in 1954. It is the world's highest-altitude and longest asphalt road, as well as the shortest, best-conditioned, and safest highway to Tibet. 2. Sedan Chassis: The minimum ground clearance of ordinary family sedans generally ranges from 11 to 15 centimeters. Based on this parameter, the higher the chassis (usually referring to over 13 centimeters), the better the off-road performance, but the stability is slightly worse when driving at high speeds. If the ground clearance is less than 110 millimeters, the car will have stable handling on highways, but its off-road performance will be poorer.
2
0
Share

What is the Toyota 2.5G?

Toyota vehicles with a 2.5G badge on the rear are Camrys. Here are the specific details about the Camry: 1. Vehicle Positioning: The Camry is positioned as a midsize sedan, with body dimensions of 4885×1840×1455mm and a wheelbase of 2825mm. 2. Powertrain: It is equipped with a 2.5L Dynamic Force Engine, delivering a maximum output power of 154kw and a maximum torque of 250Nm, paired with a Direct Shift 8-speed automatic transmission. 3. Features: The Camry comes with Toyota Safety Sense, which includes the Pre-Collision System (PCS), Lane Departure Alert (LDA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC). Additionally, it features 12 various devices to monitor the driving environment, such as Blind Spot Monitor (BSM), Rear Cross Traffic Alert, and Panoramic View Monitor (PVM).
11
2
Share

How many days does it take to get a motorcycle license at the fastest?

Applying for a motorcycle driver's license can be completed within one month at the fastest, and the license can be obtained. More relevant information is as follows: 1. Subject 2 test: The Subject 2 test is actually a motorcycle slalom test: there are several iron poles in the test site, usually one every three meters. The motorcycle is driven in an S-shape through the poles back and forth once, without crossing the side lines or stepping on the ground with the feet during the ride. After completing the test with a passing score, sign to confirm the score and wait for the Subject 4 test. 2. Subject 4 test: The content of the Subject 4 test mainly includes the identification of various road signs, traffic police hand signals, and the handling methods of various situations encountered while riding a motorcycle. The score is given on the spot, same as Subject 1. After passing, sign and wait for the oath-taking ceremony later.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.