···
Log in / Register

How to Solve Fogging on the Outside of the Car Windshield?

3 Answers
PrestonLee
08/26/25 2:54am
Here are specific solutions for fogging on the outside of the car windshield: 1. Air Conditioning Defogging: Turn on the front window defogging mode, set the fan speed to maximum, switch on the A/C, and adjust the temperature to the lowest. The fog on the glass will disappear shortly. 2. Air Convection: This method is suitable for very few situations. Opening the windows increases air convection, reduces the temperature difference inside and outside the car, and weakens the conditions for fog formation. However, it's rarely practical. For example, if it's raining outside, you can't keep the windows open, and the incoming air is quite limited. 3. Defogging Spray: (1) Simply spray it evenly on the glass surface and wipe it clean with a dry towel. (2) The principle involves using surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules, causing fog droplets to coalesce into larger droplets that don't obstruct vision. 4. DIY Defogging Spray with Dish Soap: Mixing dish soap with water is a good method. Prepare a solution in a 1:6 ratio of dish soap to water, store it in a bottle, and spray and wipe before heading out.
Was this review help?
20
1
Share
VonDiana
09/08/25 3:01am
Every time I drive and there's fog outside, I immediately turn on the wipers for a couple of sweeps, which usually clears it up. If the weather is cold or the humidity is high on rainy days, and the wipers aren't as effective, I turn on the air conditioning to the cold air mode and direct the vents towards the windshield. It usually takes about ten seconds to see results. Temperature control inside the car is also crucial. In summer, avoid setting the air conditioning too high to prevent large temperature differences between inside and outside, which can lead to more condensation. In winter, a bit of warm air combined with the wipers works well. I've been using these methods long-term, avoiding obstructed vision and significantly improving driving safety. Additionally, every few weeks, I apply an automotive anti-fog spray to the glass and wipe it down. This creates a coating that reduces the chance of fogging, which is quite convenient and doesn't require frequent reapplication.
Was this review help?
2
4
Share
Expand All
KaiLynn
10/22/25 3:04am
Having driven for many years, I place great emphasis on safety. Fogging on the outside of the windshield can obscure vision, which is very dangerous. When this happens, I immediately slow down, find a safe place to pull over temporarily, and then turn on the wipers to clear the fog. If the fogging is heavy, I activate the front windshield heating function while adjusting the air conditioning to the defrost setting. As a preventive measure, I keep the window glass clean to avoid dust buildup and minimize the temperature difference between the inside and outside of the car while driving—for example, by not setting the air conditioning temperature too low. This has helped me avoid many potential accidents.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

How Far Over the Stop Line Constitutes Running a Red Light?

If a vehicle crosses the stop line during a red light but stops immediately, it will not be considered as running a red light. When the entire vehicle crosses the stop line, meaning both the front and rear wheels have passed the stop line but have not crossed the opposite stop line, it is referred to as over-line stopping. According to Article 4, Item 5 of the "Scoring Standards for Road Traffic Safety Violations": Failing to drive or stop as required at an intersection results in a 2-point penalty. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle proceeds through an intersection during a red light, it constitutes the traffic violation of running a red light. According to Article 44 of the "Road Traffic Safety Law," motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Violating traffic signal rules, such as running a red light, results in a 6-point penalty. Running a red light refers to the act where, when the vehicle is within the stop line, the forward direction is already a red light, but the vehicle continues to move forward until both the front and rear wheels have completely crossed the stop line. This is determined by capturing three photos via electronic cameras: A photo of the vehicle crossing the intersection stop line, showing the red light and license plate number. A photo of the vehicle completely crossing the stop line, showing the red light and license plate number. A photo of the vehicle continuing to move, comparing to check if the vehicle's position has changed, showing the red light and license plate number. If these three photos are captured, the vehicle is determined to have run a red light. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to special vehicles such as ambulances or fire trucks. If a violation is captured by surveillance cameras due to yielding to emergency vehicles, the act of running a red light will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult even for electronic police to clearly see the traffic lights. Photos of the violation may be blurry, and if you accidentally run a red light, the traffic police will not impose a penalty. Emergency situations: If a citizen transports a patient with a critical condition, they can provide proof from the hospital or the person being assisted to the traffic police for verification. If confirmed, the violation record can be expunged. If possible, it is best to call an ambulance to avoid running a red light and causing a traffic accident. Traffic police direction: During peak commuting hours, traffic police may temporarily direct traffic at major intersections. Drivers must follow the gestures of the traffic police.
4
4
Share

Does a small amount of water entering through an open window during rain have a significant impact?

If only a small amount of water has entered, it indicates minimal impact. If electrical equipment remains unaffected, simply visit a 4S dealership for a drying treatment—generally, this should resolve the issue. However, if rainwater has seeped into the carpet or floor mats, they should be removed, cleaned, and dried. After addressing the water accumulation, it's advisable to disinfect the interior to prevent lingering odors. Seats that get wet may develop mold. Avoid using a hot air blower to dry them; instead, utilize seat heating functions if available to expedite moisture evaporation. Once air-dried, apply a leather polish cleaner. For sponge seats, consider disassembling and air-drying the inner sponge. Avoid fully submerging carpets in water for cleaning, as this can damage the adhesive layers between different materials and prolong drying time, leading to prolonged dampness inside the vehicle. For leather seats, refrain from using direct heat for drying, as this can cause mold, odors, and damage. Instead, use a cotton cloth to absorb moisture, followed by a leather coloring cleaner once dry. Additional precautions for water ingress include: 1. Disconnect the battery's negative terminal promptly to prevent electrical short circuits. 2. Inspect the engine immediately for water in the cylinders, which can bend connecting rods and damage the engine. 3. Check engine oil for water contamination, as this degrades lubrication and accelerates engine wear. 4. Examine the transmission for water entry, which can degrade gear oil and cause gear wear. 5. Assess brake fluid for water contamination, which compromises braking efficiency. 6. Remove water from the exhaust system promptly to prevent clogging of the catalytic converter or damage to oxygen sensors. 7. Verify the battery for water ingress; replace electrolyte if necessary. 8. For automatic transmissions, inspect both the transmission and its control unit for water damage. Seek professional assistance if water is detected to eliminate safety hazards. 9. Dry any soaked interior items promptly to prevent mold growth.
14
3
Share

How to Pay for Driving Test Retake Fees?

Students can independently schedule the test on the traffic management website, and the retake fee can be paid online in the self-service payment section. Here is relevant information: Driving License Test: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The order of the test subjects is as follows: traffic regulations and related knowledge (referred to as Subject 1), field driving (referred to as Subject 2), and road driving (referred to as Subject 3), conducted in sequence. Related Rules: During the test, if a subject is failed, the following subjects will not proceed. Each subject has two attempts, and if both attempts are failed, the test is terminated. The retake fee can be paid during the validity period of the learning driving permit, and the retake can be taken after further study. Regarding the retake fees, due to varying local conditions, the fees for retakes differ.
16
2
Share

What does 94V mean on a tire?

94V on a tire indicates that the tire has a maximum load capacity of 670 kilograms and a maximum speed of 240 kilometers per hour. The following explains tire specifications and the functions of tires: Tire specifications: Tire specifications are commonly represented by a set of numbers. The first number indicates the tire section width, and the second number indicates the rim diameter in inches. For example, 165/70/R14 represents a radial tire with a width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. The tire model can generally be found on the tire sidewall. Functions of tires: Tires are circular elastic rubber products mounted on metal rims, designed for various vehicles or machinery. They support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain the vehicle's driving performance.
8
0
Share

How to Identify China IV and China V Vehicles?

Check the vehicle's environmental protection label, which has clear markings on the back. Below are the differences between China IV and China V: Exhaust Emissions: Compared to previous standards, China V regulations reduce nitrogen oxide (NOx) emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles compared to China IV. Emission Standards: The China V emission standard reduces nitrogen oxide (NOx) emissions by 28% compared to China IV, and the combined hydrocarbon and nitrogen oxide (HC+NOx) index is lowered by 23%. For diesel vehicles, particulate matter (PM) concentration is reduced by 82%, and the new particulate number (PN) testing is specifically targeted at diesel vehicles, with PN standards only applicable to diesel vehicles.
15
5
Share

What Does PHEV Mean?

Plug-in Hybrid Electric Vehicle (PHEV) refers to a vehicle that can be charged externally and operate in pure electric mode. Once the battery is depleted, it switches to hybrid mode (primarily powered by an internal combustion engine) while simultaneously recharging the battery. Hybrid vehicles are actually a broad category, which can be divided into three types: plug-in hybrid, conventional hybrid, and range-extended hybrid. Plug-in hybrid models offer a balance between power and fuel efficiency, enjoy preferential policies in most cities, and are not overly restricted in terms of range. Compared to pure electric vehicles, which generally have shorter ranges, most people would still prefer plug-in hybrid vehicles. Series Plug-in Hybrid: Series plug-in hybrid, also known as range-extended hybrid. The engine does not directly drive the vehicle; instead, it first drives a generator to produce electricity, which then powers the electric motor to drive the car. This results in a longer energy transfer chain and relatively lower overall efficiency. Representative models include the BMW i3 Range Extender. Parallel Plug-in Hybrid: In this type, both the engine and the electric motor can drive the vehicle. It offers multiple power transmission modes, better performance, a simpler structure, and is widely used, making it the mainstream technical route. Representative models include the BYD Tang DM.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.