How to Solve Fogging on the Outside of Car Windows in Summer Rain?

1 Answers
PhoebeFitz
07/23/25 11:38pm
When car windows fog up during summer rain, if the fogging is slight, wiping with a towel will suffice; if the fogging reappears after wiping, you can adjust the temperature difference between the inside and outside using the air conditioning and wait for the fog to disappear. Turning on the air conditioning can quickly remove the fog inside the car. After turning on the air conditioning, use the recirculation mode and direct the air vents toward the windows. The fog inside the car will clear up immediately, with very fast results. However, there is a drawback: the temperature inside the car will also drop, which can be uncomfortable in winter. Additionally, using the warm air from the air conditioning can also clear fog on the windows. Adjust the switch to the warm air position and set the fan speed as high as possible, also directing the air vents toward the windows. This will raise the temperature inside the car, dry the air, and prevent fog from forming on the windows. However, this method is not suitable right after starting the car; you need to wait for the engine to warm up for it to be effective.
Was this review help?
9
5
Share
More Forum Discussions

Is It Safe If a Piece of Tire Rubber Is Torn Off?

Tire damage where a piece of rubber is torn off can be concerning. If the damage is on the sidewall of the tire, it is recommended to replace the tire, as the sidewall is the weakest part of the tire. If the fabric layers are exposed, it becomes particularly dangerous and significantly increases the risk of a blowout. For safety reasons, it is generally advisable to replace the tire with a new one. However, if the depth and width of the damage are less than 3 millimeters, the tire can still be used as a spare. More details are as follows: 1. Tire Damage: Any damage to a tire should be taken seriously, as tires bear the entire weight of the vehicle, and a blowout poses a significant risk. If a small piece of rubber is torn off from the tread pattern, it may not be a major issue for daily driving, but it is not recommended for highway use. If the sidewall is damaged, replacement is advised because the rubber on the sidewall is already thin, and further thinning due to damage increases the likelihood of a blowout. 2. Tread Wear Indicators: If the tire has worn down to the tread wear indicators—small raised bars located at the bottom of the tread grooves, which are 1.6 mm high (the legal minimum groove depth)—the tire should be replaced immediately, as continued driving is no longer safe. Using worn tires on wet roads can lead to hydroplaning, increasing the risk of losing control. This is because excessively worn treads cannot effectively channel water away from under the tire, leading to potential loss of vehicle control.
11
3
Share

What are the city license plate codes for Shaanxi Province?

Shaanxi Province's city license plate codes are as follows: Shaan A is Xi'an City, Shaan B is Tongchuan City, Shaan C is Baoji City, Shaan D is Xianyang City, Shaan E is Weinan City, Shaan F is Hanzhong City, Shaan G is Ankang City, Shaan H is Shangluo City, Shaan J is Yan'an City, Shaan K is Yulin City, Shaan V is Yangling Agricultural Demonstration Zone. License plates are plates hung on the front and rear of vehicles, typically made of aluminum, sheet metal, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information. The license plate number is a legal mark registered by statutory authorities, permitting the vehicle to operate on the road, and serves as the identification number for the vehicle.
11
2
Share

Where is the daytime running light switch for the CS75?

cs75 daytime running lights do not have an independent switch. When the Changan CS75 vehicle is started, the daytime running lights will automatically turn on. Daytime running lights are lamps that make the vehicle more easily recognizable during daytime driving. These lamps are not for illumination but serve as signal lights. Daytime running lights can improve visibility and make the vehicle more conspicuous. This technology, specifically researched for daytime use, is more direct and effective than existing lighting devices. If equipped with daytime running lights, road users can detect and recognize the vehicle earlier and better. In the dark, if the driver turns on the regular headlights, the daytime running lights will automatically turn off. The CS75 has a body length, width, and height of 4650mm, 1850mm, and 1695mm respectively, with a wheelbase of 2700mm.
18
5
Share

Is It Normal for the Rear Wheels to Have Uneven Gaps Between the Wheel and the Wheel Arch?

It is not normal for the rear wheels to have uneven gaps between the wheel and the wheel arch. One side being higher than the other could be due to a significant difference in tire pressure between the left and right sides, excessive load on one side of the vehicle, or a damaged shock absorber on one side. A vehicle with one side higher than the other can compromise its balance and stability. In such cases, it is necessary to promptly identify the cause of the issue and carry out repairs. A significant difference in tire pressure between the two sides is also a common issue. In this case, it is necessary to check whether the tires are damaged or leaking. If a tire is damaged or leaking, it needs to be replaced. It is best to replace a pair of tires at the same time. Replacing only one tire may also affect the driving experience. Excessive load on one side of the vehicle can also cause the body to be higher on one side than the other. This is often due to the shock absorber system reaching the end of its lifespan. At this point, the shock absorber system can no longer provide sufficient support for the vehicle. The solution is to replace the shock absorbers and springs. In vehicles that have been in use for a long time, the shock absorber system is prone to failure. Common issues with the shock absorber system include oil leakage from the shock absorbers and loss of elasticity in the shock absorber springs. Both of these problems can lead to insufficient support from the shock absorber system, resulting in uneven height on both sides of the vehicle. The solution is to replace the shock absorber system.
3
1
Share

What does the red key warning light on the dashboard mean?

The reasons for the red key warning light on the dashboard: There are two types of dashboard key flashing red lights. One type does not have a KEY symbol and is the engine immobilizer indicator light. If this light is on, it indicates a fault in the anti-theft system, and you should take your car to a 4S shop or auto repair shop for inspection. The other type has a KEY symbol, which indicates that the car key battery is low. You should check it immediately to determine whether the battery needs to be replaced. If the battery is low, it should be replaced as soon as possible to avoid inconvenience in using the car. The dashboard is a rigid panel or structural component used to install instruments and related devices. It can be classified into screen-type dashboards, frame-type dashboards, channel-type dashboards, and cabinet-type dashboards. Some indicators and warning lights are also included.
14
0
Share

Why Does Brake Fluid Need to Be Replaced?

Brake fluid needs to be replaced because: after a certain period of use, the boiling point of brake fluid decreases, it becomes contaminated, and undergoes varying degrees of oxidation and deterioration. Brake fluid absorbs moisture from the air, and the hydraulic braking system must allow the brake fluid to be exposed to the atmosphere to function properly. Over time, the brake fluid absorbs moisture, which turns into bubbles under high temperatures. When bubbles form in the brake fluid lines, braking efficiency decreases. Therefore, brake fluid should be regularly checked for quality and performance based on climate, operating environment, seasonal changes, and working conditions, and replaced on schedule. Brake fluid should generally be replaced every two years or 50,000 kilometers. When selecting brake fluid, different types should not be mixed to avoid chemical reactions that could affect braking performance.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.