How to Solve Fogging on the Outside of Car Windows in Summer?

2 Answers
LeLouis
08/31/25 7:32am
Fogging on the outside of car windows occurs because the air conditioning is turned on inside the car. The temperature difference between the inside and outside of the car causes this situation. You can first turn off the air conditioning inside the car, so that when the temperatures inside and outside are consistent, fogging is less likely to occur. More information about fogging on the outside of car windows is as follows: Turn on the recirculation mode inside the car: Enhancing air circulation helps dissipate the fog. Use the wipers to clean the outside glass: This helps keep the defroster working to maintain clear and transparent windows. Use windshield washer fluid to clean the window glass: This can prevent fogging. Anti-fog spray: Using it once can keep the windows fog-free for about a month, and it can be used on both the inside and outside glass. Use detergent: Mix a small amount of water to clean the inside and outside of the glass, making it less prone to fogging.
Was this review help?
11
3
Share
OCharlie
09/13/25 3:49am
Fogging on the outside of car windows in summer is quite common, mainly due to high temperatures, high humidity, and temperature differences causing water vapor to condense on the glass. My usual approach is to immediately turn on the air conditioning, switch to the cold air defogging mode, increase the fan speed, and direct it toward the windows. The fog usually clears within a few minutes. Keeping the windows clean and reducing dust buildup can also help minimize fogging. Never get distracted while driving—safety comes first. You can also keep a bottle of car-specific defogging spray, available at supermarkets, which provides long-lasting results when applied to the glass. Regular maintenance of the vehicle's air conditioning system can help prevent the issue. If the windshield wipers are in good condition, turning them on can help a little, but don’t rely on them—the air conditioning is the most effective solution.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What are the corresponding speeds for gear shifting during Subject 3 driving test?

Subject 3 gear and speed standards are as follows: 1st gear is 0-20 km/h; 2nd gear is 5-30 km/h; 3rd gear is 15-40 km/h; 4th gear is 30-55 km/h. Gear shifting speed requirements for Subject 3: The exam's speed and gear matching requirements differ slightly from real-world driving. The allowable range for 1st gear is 0 to 20 km/h, with the shift to 2nd gear recommended between 15 to 20 km/h; 2nd gear allows 10 to 30 km/h, with shift to 3rd gear recommended at 25 to 30 km/h; 3rd gear allows 20 to 40 km/h, with shift to 4th gear recommended at 35 to 40 km/h; 4th gear allows 30 to 50 km/h, with shift to 5th gear recommended at 45 to 50 km/h. Subject 3 important notes: Follow prompt instructions; pay attention to special zones; observe turn signal usage and gear/speed matching principles; focus on observation; maintain proper mindset; look ahead and avoid looking down; follow steering wheel adjustment principles; avoid mistakes when pulling over.
5
1
Share

Which provinces allow motorcycles to drive on highways?

Provinces where motorcycles are allowed on highways include: Anhui, Heilongjiang, Hubei, Hunan, Beijing, Liaoning, Hainan, Guizhou, Xinjiang, Yunnan and other provincial/municipal expressways. The speed limits and driving regulations for motorcycles are as follows: Motorcycle speed limits: Highways shall indicate lane speed limits, with maximum speeds not exceeding 120 km/h and minimum speeds not below 60 km/h. On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, other motor vehicles shall not exceed 100 km/h, and motorcycles shall not exceed 80 km/h. Motorcycle driving regulations: Motorcycle riders must wear safety helmets as required to ensure driving safety; must possess a motorcycle driver's license; motorcycles on highways cannot carry passengers; motorcycle speed on highways must not exceed 80 km/h and must use the rightmost lane; motorcycles cannot perform dangerous actions such as removing hands from handlebars while driving, nor can they tow or be towed by other vehicles.
13
3
Share

What does the K represent in car brands?

K represents the logo of Kia, which is the Kia Motors Corporation, a South Korean automobile manufacturer. The main details and brand connotations of the K logo car are as follows: Main details of the K logo car: Kia, or Kia Motors Corporation, is the earliest automobile manufacturer in South Korea. In 2000, it merged with Hyundai Group to form Hyundai Kia Automotive Group. Hyundai Kia Automotive Group is the world's fifth-largest automobile manufacturer by production volume. It has complete production lines for passenger and commercial vehicles, with the Asan Bay plant covering 3.3 million square meters and the Sohari plant covering 790,000 square meters, boasting an annual production capacity of one million vehicles. Its sales network spans over 180 countries. Brand connotations of the K logo: The name Kia originates from Chinese, where 'Ki' means 'to rise' and 'A' stands for Asia. Therefore, Kia signifies 'to rise from the East' or 'to rise from Asia.' The name, derived from Chinese and symbolizing the rise of Asia, reflects Kia's vision—to rise in Asia and expand globally.
9
2
Share

Does idling with the AC on harm a diesel vehicle?

Idling with the AC on can harm your vehicle. 1. Reason: It is not recommended to keep the engine idling with the AC on for extended periods, as this not only wears down the engine but also leads to deteriorating air quality inside the cabin when the AC is set to recirculate mode, potentially producing harmful gases. 2. Justification: The power consumed by the AC accounts for only a small portion of the engine's idle energy output. However, when idling with the AC on, the engine must not only power the AC compressor but also maintain the operation of the power steering and brake booster pumps, wasting energy. If the engine detects excessive pressure, it may automatically increase fuel injection, leading to higher fuel consumption and increased carbon buildup in the engine.
18
3
Share

How to Determine if a Truck Fan Clutch is Faulty?

Truck fan clutch failure can be determined by checking for oil leaks and observing changes in water temperature during winter or summer driving. Specific details are as follows: 1. Water temperature changes: A faulty fan clutch can cause excessive or insufficient airflow. Excessive airflow prevents the engine temperature from rising promptly, while insufficient airflow leads to engine overheating and operational failure. 2. When the fan clutch malfunctions: In this scenario, the engine may fail. The main shaft of the loosened nut locking disc inserts into the pin hole, fixing the fan and drive shaft without using the fan clutch, forcing the fan to rotate. When there's an opportunity to repair the fan clutch, the automatic clutch function should be restored.
20
1
Share

What are the differences between Vellfire, Alphard, and Vellfire?

The differences between Vellfire and Alphard lie in the front fascia, headlights and taillights, and logo. Below are the relevant details: 1. Front fascia: The Vellfire's front grille features a layered arrangement with upper and lower sections connected, and the sporty version adopts a large-sized horizontal grille; whereas the Alphard uses an exaggerated "large fang" grille, with chrome trim on both sides extending into the headlights. 2. Headlights and taillights: The Vellfire employs split-type headlights and taillights, while the Alphard uses integrated ones, making the difference immediately apparent. 3. Logo: The Vellfire's front emblem features Toyota's bullhead logo, while the Alphard has a dedicated emblem.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.