How to Solve Fogging Inside the Car?

1 Answers
NathanMarie
07/29/25 10:26pm
There are several methods to deal with fogging inside the car, which are: 1. When the fogging is not severe, you can appropriately open both windows to allow air convection. 2. Turn on the air conditioning cold air, which can eliminate fogging in a very short time. 3. Turn on the air conditioning cold and hot air, which can fundamentally solve the problem of glass fogging. 4. Use anti-fog spray, spraying a layer on the windshield to form an effective protective film, thereby preventing the condensation of water vapor. Here are some additional introductions: For some high-end brands, vehicles are equipped with functions to prevent fogging. The air conditioning system in these models constantly monitors the temperature and humidity inside the car and analyzes the critical temperature for water vapor condensation at the moment based on these two indicators. By comparison, it can determine whether the air inside the car will fog up on the front windshield.
Was this review help?
14
0
Share
More Forum Discussions

How to reset the maintenance wrench on the 2020 Tiggo 8?

Insert the car key into the ignition switch and hold down the small black lever on the dashboard. Wait for the self-check to complete, then release the pressed small black lever. Start the engine normally, and the maintenance reminder will be reset.
10
5
Share

How to Fold the Rearview Mirrors on the 2021 X-Trail?

Set the ignition switch to the ACC or ON position. Move the mirror selection switch to L (left) or R (right) to choose the mirror you want to adjust. Then press the mirror adjustment switch to adjust the mirror left, right, up, or down.
10
2
Share

How to Handle the Annual Review of an A2 Driver's License with 2 Points Deducted?

First, locate and click to open the Traffic Management 12123 app, enter your mobile number and password, then click the login button below to log in. Click on the [More] option at the bottom of the homepage to proceed. After opening More, scroll down and find the [Study to Reduce Points] option. By studying and answering questions, you can reduce the deducted points. A maximum of 6 points can be reduced in one scoring cycle.
6
0
Share

How to Reverse and Park a B2 Truck in the Garage?

If the vehicle body is tilted, it is very easy to cross the line during reversing and also prone to pressing the corner of the garage when exiting. The key to keeping the vehicle body straight is to learn how to correct it by observing the rearview mirrors. When starting to reverse, you can first turn the steering wheel half a turn to the right, keeping the vehicle body slightly tilted toward the garage direction while reversing. After the rear of the vehicle enters the garage, keep the steering wheel almost fully turned until the extension line of the vehicle's center line swings into the bottom edge of the garage about 50 centimeters, then start to turn the steering wheel back.
17
5
Share

How to handle 3 points deducted from a B2 driver's license on 12123?

Enter the software's homepage, then click "More" on the right side of the main interface. Jump to the business guidance center interface. Then click the "Inspection Education Application" option under "Education and Learning Business". Check the agreement indicated by the arrow, then click "Next". Follow the instructions. Finally, confirm the information and click the "Submit Application" button below.
5
1
Share

How to reset the tire pressure warning light on the 2020 Great Wall Poer?

To reset the tire pressure warning light on the 2020 Great Wall Poer, perform a tire pressure reset. The method for tire pressure reset is as follows: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. After hearing a "beep" sound, release the button. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Tire pressure monitoring automatically checks the tire pressure in real-time while driving and alerts the driver to low pressure or leaks to ensure driving safety. There are generally three reasons for abnormal tire pressure warnings: Abnormal tire pressure: The system usually triggers a warning when the pressure is below 1.8 bar or above 3.0 bar. In this case, check and adjust the tire pressure. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the old data, causing the tire pressure warning light to remain on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light may illuminate. In case of sensor damage, the only solution is to replace it with a new one.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.