How to Solve Exhaust Pipe Rusting?

Where is the license plate Gan C from?

Gan C belongs to Jinchang City, Gansu Province. Here is an introduction to license plates from other regions in Gansu Province: 1. Gan A belongs to Lanzhou City; 2. Gan B belongs to Jiayuguan City; 3. Gan C belongs to Jinchang City; 4. Gan D belongs to Baiyin City; 5. Gan E belongs to Tianshui City; 6. Gan F belongs to Jiuquan City; 7. Gan G belongs to Zhangye City; 8. Gan H belongs to Wuwei City; 9. Gan J belongs to Dingxi Prefecture; 10. Gan K belongs to Longnan Prefecture; 11. Gan L belongs to Pingliang City; 12. Gan M belongs to Qingyang City; 13. Gan N belongs to Linxia Hui Autonomous Prefecture; 14. Gan P belongs to Gannan Tibetan Autonomous Prefecture; 15. Gan O is reserved for government use.

17

5

Share

Where is the thermostat located in the Wuling Hongguang?

The thermostat in the Wuling Hongguang is located inside the engine outlet pipe joint. You can find it by following the radiator pipe towards the position near the engine block. The function of the thermostat is to automatically adjust the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. The relevant introduction of the thermostat is as follows: 1. The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. 2. If the main valve of the thermostat opens too late, it will cause the engine to overheat; if the main valve opens too early, it will prolong the engine's warm-up time, resulting in the engine temperature being too low.

16

5

Share

Is There Any Harm in Not Straightening the Steering Wheel?

The hazards of not straightening the steering wheel are as follows: 1. Damage to the steering system and vehicle deviation: When the gears of the steering wheel and the rack of the steering linkage are under stress, it can lead to faults such as aging and deformation of the steering linkage and ball joints, resulting in incorrect four-wheel alignment data, vehicle deviation, and uneven tire wear; 2. Damage to the suspension system: Under normal parking conditions, the suspension system is in a relaxed state with balanced force. High-speed driving can cause severe shaking and even loss of vehicle balance; 3. Damage to tires: Not straightening the steering wheel after parking can also harm the tires, accelerating the aging and deformation of the tire sidewalls, thereby increasing the risk of air leakage and tire blowouts; 4. Accelerated aging of rubber components.

5

4

Share

What is the fuel consumption of the Wuling Xingchen?

There are currently 5 available models of the Wuling Xingchen. The manual transmission Starlight Edition and manual transmission Star Motion Edition are both equipped with a 147 horsepower 1.5T engine, with an NEDC fuel consumption of 7.1L per 100km. The CVT Star Shine Edition, CVT Star Ray Edition, and CVT Star Glory Edition also feature a 147 horsepower 1.5T engine, with an NEDC fuel consumption of 7.7L per 100km in fuel mode. The fuel tank capacity of the Wuling Xingchen is 52L. The driving distance on a full tank is as follows: For the manual transmission Starlight Edition and manual transmission Star Motion Edition, the driving distance on a full tank is 52/7.1*100=732km. For the CVT Star Shine Edition, CVT Star Ray Edition, and CVT Star Glory Edition, the driving distance on a full tank is 52/7.7*100=675km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching traffic lights can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically mean higher power output, requiring more gasoline for combustion. Heavier cars also have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Environmental temperature: Lower temperatures make it harder for the injected gasoline to atomize during cold starts, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, in cold weather, the engine's computer may control higher idle speeds to warm up the engine, which also increases fuel consumption.

2

5

Share

Manual Transmission Car Shaking During Start?

Manual transmission car shaking during start involves many reasons, which can be roughly divided into the following categories: 1. Normal phenomenon. When the clutch is released to the semi-engaged state, the vehicle will shake, which is a normal phenomenon. This phenomenon is called the car creeping phenomenon. Additionally, if starting without giving gas on a slightly inclined surface, the shaking will be more noticeable. 2. Driver issue. This refers to problems with the coordination between the gas pedal and clutch. Either too little gas is given or the clutch is released too quickly. The solution is to add a bit of gas before fully releasing the clutch, which will improve the car's power, make starting easier, and reduce shaking. 3. Vehicle malfunction. Issues in the intake system, ignition system, or fuel system can all cause the car to shake during start. For example, clogged fuel lines can cause uneven engine cylinder operation leading to shaking; a dirty throttle body can cause uneven intake and operation leading to shaking; damaged high-voltage wires or faulty spark plugs can cause unstable engine operation and shaking.

19

2

Share

What Causes Intermittent Fueling Issues in Motorcycles?

The main reasons for motorcycles not fueling properly: 1. A lean air-fuel mixture causes insufficient piston thrust after ignition, prolonged combustion time, and engine overheating. Symptoms of a lean mixture include poor acceleration during operation, which temporarily improves when manually adjusting the choke or pumping fuel, but returns to weak acceleration without enriching the mixture. Causes of a lean mixture include: fuel needle adjusted too low; fuel level set too low; partial clogging of the main jet; carburetor intake leaks; missing air filter; or restricted fuel flow from the tank. 2. Poor crankshaft case sealing in two-stroke engines: failed crankshaft oil seal causing air leaks on the generator side; leaks at the crankshaft case seam; leaks between the crankshaft case and cylinder, or incorrect piston installation. 3. Issues with the two-stroke reed valve: damaged reed valve; incorrectly installed rotary valve causing carburetor backfire.

9

3

Share

How to Solve Exhaust Pipe Rusting?

Where is the license plate Gan C from?

Where is the thermostat located in the Wuling Hongguang?

Is There Any Harm in Not Straightening the Steering Wheel?

What is the fuel consumption of the Wuling Xingchen?

Manual Transmission Car Shaking During Start?

What Causes Intermittent Fueling Issues in Motorcycles?

How to Turn on Car Air Conditioning in Winter?

Is Wheel Alignment Necessary When Replacing New Tires?

Does the throttle need to be recalibrated after cleaning?

What are the reasons for car shaking after replacing spark plugs?