How to Solve Engine Oil Leakage in Cars?

2 Answers
McAbel
07/24/25 7:26am
The solutions for engine oil leakage in cars are: 1. Replace the damaged sealing ring; 2. Identify the leakage location and clean the oil traces at the leakage point; 3. Tighten loose bolts and replace damaged accessories. The causes of engine oil leakage include: 1. The sealing gasket at the base of the oil filter is not tight or has aged; 2. The transmission oil is overloaded; 3. The vehicle chassis is not tightly sealed due to impact; 4. The gear cover is aged or damaged; 5. The drain plug is loose or damaged; 6. The front and rear oil seals of the crankshaft are leaking. The composition of engine oil includes: 1. Base oil, which is the main component of lubricating oil and determines its basic properties; 2. Additives, which compensate for and improve the deficiencies in the performance of the base oil.
Was this review help?
3
5
Share
MaverickDella
08/11/25 3:12am
Last time I encountered an engine oil leak, I immediately parked the car and checked the dipstick. Upon finding the oil level low, I promptly added spare oil to prevent engine damage. Then I carefully inspected the undercarriage for the leak location—usually caused by a loose oil pan bolt or deteriorated/worn gasket. When attempting DIY repairs, first ensure the engine is cool to avoid burns, then try tightening the bolt with a wrench. If it still leaks, it might be due to improper oil filter installation or a failed main seal, in which case professional repair shop replacement is necessary. Reminder: Oil leaks not only waste money but can also pollute the environment. Regular maintenance checks on these seals save hassle and expenses. Always watch for oil stains on the ground while driving—early detection and treatment prevent minor issues from escalating.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Lights to Turn On When a Vehicle Breaks Down at Night?

When a motor vehicle breaks down on the road at night and is difficult to move, the clearance lights and rear position lights should be turned on. According to Article 60 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China', if a motor vehicle breaks down or is involved in a traffic accident on the road, obstructing traffic and being difficult to move, the hazard warning flashers should be activated as required, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the clearance lights and rear position lights should also be turned on simultaneously. Additional Information: 1. Continuously Activate Hazard Warning Flashers: According to Article 52 of the 'Road Traffic Safety Law of the People's Republic of China', when a motor vehicle breaks down on the road and needs to stop to address the issue, the driver should immediately turn on the hazard warning flashers, move the vehicle to a place where it does not obstruct traffic, and park it. If the vehicle is difficult to move, the hazard warning flashers should remain on continuously, and warning signs should be set up in the direction of oncoming traffic to increase the warning distance. If necessary, call the police promptly. 2. Set Up Warning Signs: According to Article 68, if a motor vehicle breaks down on a highway, the provisions of Article 52 of this Law shall apply. However, the warning signs should be placed at least 150 meters away in the direction of oncoming traffic. All occupants should quickly move to the right shoulder or emergency lane and call the police immediately.
8
2
Share

Why does the one-touch lock on the door handle fail?

The reason for the failure of the one-touch lock on the door handle may be a short circuit in the touch switch of the door handle. The smart key system utilizes the world's most advanced radio frequency technology and the most advanced vehicle identity coding recognition system to provide maximum convenience and security for the vehicle. Additional information: 1. Car smart key: The system includes a keyless entry system and a keyless start system. When the car detects the signal from the key, it can automatically unlock or lock the doors, with an effective range of no less than 1.5 meters. 2. When pressing the wireless key does not start the car: If pressing the keyless start button does not start the vehicle, bring the smart key close to the keyless start button and press the button again, and the vehicle will start normally.
6
2
Share

Is Tiptronic CVT or AT

Tiptronic transmission refers to an automatic transmission with manual shifting function, which is not necessarily an AT transmission. It could also be a dual-clutch transmission or a CVT. Additional information is as follows: 1. Tiptronic: Tiptronic combines manual shifting and automatic shifting in a single transmission system. The manual mode allows drivers to freely adjust gears and RPM, delivering an exhilarating driving experience with a strong sense of sportiness and driving pleasure. 2. AT: A transmission is a mechanism used to alter the speed and torque from the engine. It can fixedly or stepwise change the transmission ratio between the output shaft and input shaft, hence also called a gearbox. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also equipped with a power take-off mechanism. Most transmission mechanisms use ordinary gear transmission, while some employ planetary gear transmission. Ordinary gear transmission mechanisms typically use sliding gears and synchronizers.
17
4
Share

Can the Car Windshield Washer Fluid Be Filled to the Top?

If the windshield washer fluid is filled too full, it may cause leakage. Just filling it to the top can result in seepage, and if the washer fluid reservoir or connecting hoses are cracked and leaking, replacement is the only solution. The windshield washer fluid reservoir in cars typically has a capacity of several liters, and you can purchase the appropriate amount of washer fluid based on your specific vehicle model. Below is some relevant information: 1. The role of windshield washer fluid: For car windows, washer fluid serves to prevent static electricity, provide lubrication, and resist low temperatures. The anti-static function helps prevent dust from adhering, keeping the windows clean and dust-free. As for lubrication, this function is highly useful as it reduces friction between the windshield and wipers, avoiding scratches or marks on the glass. 2. Classification of windshield washer fluid: Due to different freezing points, washer fluid is divided into winter and summer types. During cold winter weather, it is essential to use the winter-specific type; otherwise, the washer fluid may freeze and cause unnecessary damage to the car.
10
0
Share

How Many Years Until a Family Sedan is Scrapped?

There is no usage lifespan limit for sedans. When the normal driving mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. Motor vehicle scrapping process: 1. The car owner applying for scrapping and renewal must fill out an "Application Form for Motor Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. 2. Apply at the registration and acceptance counter. For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For motor vehicles that have not reached the scrapping age, upon verification by the motor vehicle inspection counter and if they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. 3. The vehicle owner can choose a qualified recycling company to deliver the vehicle for dismantling, based on the "Notice". 4. After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The vehicle owner must submit the "Modification Form", "XX Province Renewal Vehicle Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
16
1
Share

What is the method for cleaning an engine radiator?

Engine radiator cleaning method is: 1. Remove the bumper; 2. Adjust the water gun nozzle to a spray pattern and set the pressure to an appropriate level, then rinse the dirty radiator surface. The function of the engine radiator is: when the engine water temperature is high, the water in the water pump circulates repeatedly to lower the engine temperature, thereby protecting the engine. In winter when the water temperature is low, the water circulation stops to prevent the engine temperature from dropping. The components of an engine radiator include: 1. Radiator core; 2. Water pipes; 3. Cooling air fins; 4. Upper water tank; 5. Lower water tank.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.