How to Solve Engine Oil Leakage?

1 Answers
DelColton
07/29/25 8:04pm
There are 5 solutions for engine oil leakage: 1. Inspect or replace the engine oil filter; 2. Replace the valve cover gasket; 3. Remove the engine timing cover and apply sealant; 4. Tighten or replace the oil drain plug; 5. Replace the oil pan gasket and apply sealant. Engine maintenance methods include the following 3 points: 1. Use appropriate high-quality lubricating oil: SD-SF grade gasoline engine oil should be selected based on the additional equipment and conditions of the intake and exhaust systems. For diesel engines, CB-CD grade diesel oil should be chosen according to mechanical load, with standards not lower than the manufacturer's requirements; 2. Regularly remove scale from the car radiator: In the cooling system, rust and dirt can restrict coolant flow, reduce cooling efficiency, cause engine overheating, and even lead to engine damage; 3. Maintain reasonable speed: During normal operation, a reasonable speed ensures the engine runs smoothly. However, prolonged operation at excessively low or high speeds can easily damage the engine.
Was this review help?
12
4
Share
More Forum Discussions

Why can't the hood of an old Ford Focus be opened?

The reason why the hood of an old Ford Focus cannot be opened may be due to a damaged front hood switch or a detached hood release cable. Here are the relevant explanations: 1. Airflow guidance: For objects moving at high speed in the air, the air resistance and turbulence generated by the airflow around the moving object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the grip of the front tires on the ground and improving the car's driving stability. 2. Engine protection: Under the hood are important components of the car, including the engine, electrical circuits, fuel system, braking system, and transmission system, etc. These are crucial for the vehicle. By enhancing the strength and structure of the hood, adverse effects such as impacts, corrosion, rain, and electrical interference can be effectively prevented, ensuring the normal operation of the vehicle.
18
2
Share

What causes high low pressure and low high pressure in car air conditioning, resulting in no cooling?

Car air conditioning, high low pressure, low high pressure, no cooling causes and solutions: 1. Insufficient refrigerant in the compressor: Add refrigerant. 2. Sensor failure: If a certain temperature zone is not cooling, such as the refrigerator compartment or variable temperature compartment, check whether the sensor parameters of that temperature zone are normal. 3. The solenoid valve does not reverse: Check whether the solenoid valve is normal according to the solenoid valve detection method. 4. Capillary tube blockage: If a certain temperature zone is not cooling and the solenoid valve reverses normally, it can be determined that it is a system problem, and further system opening is required for judgment. 5. System failure: Check whether the capillary tube is dirty, oil clogged or ice clogged. If the refrigerator sometimes cools and sometimes does not, it is generally ice clogged. If nitrogen is used to blow the pipeline and dirt or blockage is found, it indicates dirty or oil clogged. If there is no refrigerant when opening the system, it indicates refrigerant leakage. Check the leakage point for repair. 6. Compressor failure: The whole machine does not cool. Open the system and check whether there is enough refrigerant sprayed out to determine whether it is refrigerant leakage. If there is no leakage, check whether the compressor is not exhausting.
10
1
Share

What lights should be turned on when driving in foggy weather?

When driving in foggy conditions, turn on the fog lights and hazard warning flashers. When driving at night without street lights, poor lighting, or encountering low visibility conditions such as fog, rain, snow, dust, or hail, vehicles should turn on the headlights, position lights, and tail lights. When a following vehicle is driving close to the vehicle in front in the same direction, the high beams should not be used. Below are specific details about fog lights: 1. Fog lights are lighting signals used in rainy or foggy weather. Their main characteristic is strong penetration in fog, making it easier for vehicles or pedestrians to notice them early in low-visibility conditions, thereby effectively preventing accidents. 2. Fog lights should not be used as regular lighting. Using fog lights during nights with good visibility can have adverse effects no less severe than using high beams.
8
3
Share

Are the screws on a car prone to loosening?

Whether the screws on a car are prone to loosening depends on their location. For example, screws on the car chassis are more likely to loosen, while those in other areas are less prone to loosening. The parts of the car chassis that are prone to failure mainly include: 1. Shock absorbers: Oil leakage is a precursor to shock absorber damage. Additionally, significantly increased bumpiness when driving on rough roads or extended braking distances are also signs of shock absorber failure. 2. Suspension control arm bushings: Damaged bushings can cause a series of issues such as vehicle deviation and wobbling. If the chassis is inspected carefully, damaged bushings are easy to spot. 3. Tie rods: Loose tie rods pose a serious safety hazard. Therefore, during routine maintenance, this area should be carefully inspected. The method is simple: hold the tie rod and shake it forcefully. If there is no movement, everything is normal; otherwise, the ball joint or tie rod assembly should be replaced. 4. Exhaust pipe: The exhaust pipe is one of the most vulnerable parts under the car, especially those with catalytic converters, which require careful inspection. 5. Universal joint dust covers: The dust covers on the universal joints not only prevent dust but also keep the grease around the universal joints from leaking. Once the dust cover is damaged, the grease will quickly leak out, leading to dry friction and easy damage to the universal joint.
5
4
Share

How to Solve Incomplete Gasoline Combustion?

There are several specific methods to address incomplete gasoline combustion: 1. If it is caused by carbon deposits in the engine, cleaning the engine's fuel injectors will suffice. 2. If the exhaust gas recirculation system is malfunctioning, leading to oxygen deficiency in the combustion chamber, the exhaust gas recirculation system needs to be repaired. 3. If the engine experiences "misfiring," where one or more cylinders are not functioning properly, the faulty combustion cylinder(s) need to be repaired. 4. If the issue is caused by the use of low-quality gasoline, switching to higher-quality gasoline is necessary. Note: Since there are many potential causes of incomplete gasoline combustion and professional equipment is required, it is recommended that car owners seek inspection and repair at a professional institution.
3
2
Share

What does keyout mean?

keyout means that the smart key is not inside the vehicle or is outside the effective range of the key. Below is extended information regarding keyout precautions: 1. The driver should check whether the smart key is inside the vehicle or if the smart key battery has sufficient charge. Insufficient battery power can cause the key signal to be too weak to be received, resulting in the dashboard displaying keyout. 2. If the smart key system or wireless module is damaged or malfunctioning, it needs to be inspected by a professional institution. 3. Check if it is a false alarm from the system. Try turning off the engine and restarting it to determine the issue.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.