How to Solve Drowsiness While Driving?

1 Answers
DiMackenzie
07/29/25 8:28pm
Here are specific methods to avoid drowsiness while driving: 1. Use the external air circulation more often. If the car remains in internal air circulation for a long time, the overall air quality inside the car will decrease, and the oxygen level will be particularly low. This can lead to brain hypoxia, which easily causes drowsiness. Therefore, it's advisable to use internal circulation more frequently or alternate between internal and external circulation to let fresh air in, which can help refresh the mind. 2. Keep mentholatum or essential balm handy. Apply some mentholatum or essential balm to your temples to stimulate nerve sensations. 3. Expand your field of vision to relax the optic nerves. Staring straight ahead for a long time can easily lead to fatigue. Besides regularly checking the rearview mirror, you can also occasionally glance at the slightly broader surroundings to give your eyes some relief.
Was this review help?
10
5
Share
More Forum Discussions

How to Press the Buttons in Subject Three?

First, walk to the rear seat on the driver's side and press the first button, then proceed to the right rear and press the second button. After that, move forward to the front passenger seat and press the third button. All three buttons are located on the exterior. When pressing the buttons on the car, avoid pressing them too briefly, as the system may deem it invalid. It's best to hold each button for three seconds.
1
0
Share

What do main road vehicles and auxiliary road vehicles mean?

Main road vehicles refer to motor vehicles traveling on the main road, while auxiliary road vehicles refer to motor vehicles traveling on the auxiliary road. The differences between main roads and auxiliary roads are as follows: Main roads are exclusively for motor vehicles, whereas auxiliary roads are mixed-use for motor vehicles, non-motor vehicles, and pedestrians. Another difference is speed limits: auxiliary roads have a speed limit of no more than 60 km/h, while main roads can have speed limits of 80 km/h or higher. The specific distinctions between main roads and auxiliary roads are as follows: 1. Different functions: When there is too much traffic on the main road, causing high traffic pressure, some vehicles can first travel on the auxiliary road to alleviate the traffic pressure on the main road. 2. Different specifications: For one-way motor vehicle lanes with physical separation from non-motor vehicle lanes, the width of the motor vehicle lane should not be less than 7.5m; for one-way motor vehicle lanes with marked separation from non-motor vehicle lanes, the width of the auxiliary road should not be less than 8.5m; when both motor vehicle and non-motor vehicle traffic volumes are high, the width of the auxiliary road can be 12~13m. 3. Different quantities: Auxiliary roads in ground-level expressways should be set on one or both sides of the main road; in elevated roads, they should be set on the ground level below the elevated road; in urban areas, they should be continuously set. For auxiliary roads of expressways located in suburban areas, they can be set continuously or intermittently.
7
1
Share

How to use wireless charging in Cadillac CT5?

Remove all items from the charging pad. If there are any items on the charging pad, the system may not be able to charge. Place it above the charging symbol on the charging pad and align it with the left wall of the charging compartment. The charging symbol (lightning icon) will be displayed on the infotainment system screen.
8
5
Share

What are the steps for pulling over in Subject 3 of the driving test?

After hearing the voice prompt "Pull over," downshift and reduce speed, keeping the speed below 20km/h. After confirming safety, turn on the right turn signal. The next step is to find the 30cm mark. Pay attention to the vehicle, adjust the body position, and stop when the distance between the vehicle body and the roadside edge line is less than 30cm.
1
4
Share

How many years of driving experience are required for car rental?

There are no requirements for driving experience when renting a car, but a valid driver's license is mandatory. Other requirements for car rental are as follows: age must be 18 years or older; possession of a valid motor vehicle driver's license from the People's Republic of China; provision of valid personal identification; and possession of a valid personal credit card or domestic debit card. Valid personal identification documents required for car rental include: second-generation ID card (for domestic residents), Mainland Travel Permit for Hong Kong and Macao Residents (for Hong Kong and Macao), Mainland Travel Permit for Taiwan Residents (for Taiwan), passport, and visa/residence permit (for foreigners). Precautions for car rental: Choose a reputable rental company: If you want to rent a car, you should opt for a reputable rental company with legally registered vehicles, ensuring peace of mind during use. Focus on checking the company's relevant qualifications and certificates. Verify the completeness of the rental vehicle's insurance: Rental vehicles typically require insurance, preferably full coverage. However, some rental companies may cut costs by not purchasing comprehensive insurance, such as omitting vehicle damage coverage. In the event of an accident, the renter may have to bear repair costs, so it's essential to confirm the completeness of the vehicle's insurance. Inspect the vehicle's condition before renting: Before renting a car, thoroughly check the vehicle's condition, especially the tires and engine, to ensure everything is in proper working order for safe driving.
1
2
Share

Is the turn signal left or right when pushed down?

Turning the signal lever downward activates the left turn signal. The turn signal follows the direction of the steering wheel—pushing the lever down indicates a left turn, while pushing it up indicates a right turn. Turn signals are essential in situations such as lane changes, overtaking, or making U-turns. It is crucial to activate the turn signal in advance to inform other drivers of your intended movement. Turn signals are vital indicators used when a vehicle is turning to alert surrounding vehicles and pedestrians. The turn signal bulb typically uses a xenon tube, controlled by a microcontroller circuit, flashing alternately and continuously. Turn signals employ a flasher unit to achieve the blinking effect, which can be categorized into three types: thermal (wire-wound), capacitive, and electronic. Precautions for using turn signals: 1. When overtaking, first activate the left turn signal, then the right. According to regulations, overtaking must be done from the left side, so the left turn signal should be activated first. After overtaking, activate the right turn signal when returning to the original lane. 2. Activate the turn signal in advance. When preparing to turn, signal 10-20 seconds beforehand to give following drivers sufficient reaction time. However, the exact timing may vary based on road conditions, traffic, and speed, but it should generally not be less than 10 seconds. 3. When entering a highway, activate the left turn signal; when exiting, activate the right turn signal. This is because entering a highway involves a left turn, while exiting involves a right turn. Similarly, when merging from a side road onto a main road, use the left turn signal, and when moving from the main road to a side road, use the right turn signal.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.