How to Solve Carbon Deposit Issues in BMW Intake Valves?

What are the body dimensions of the GAC Trumpchi GS3?

The body dimensions of the GAC Trumpchi GS3 are: length 4350mm, width 1825mm, height 1685mm, wheelbase 2560mm, minimum ground clearance 179mm, fuel tank capacity 50l, luggage compartment volume 370 to 780l, and body weight 1347kg. Taking the 2021 GAC Trumpchi GS3 as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a torsion beam non-independent suspension, equipped with a 1.5t turbocharged engine, maximum horsepower 163ps, maximum power 120kw, maximum torque 235nm, matched with a 6-speed manual transmission.

2

3

Share

What are the types of intake manifold absolute pressure sensors?

Intake manifold absolute pressure sensors include the following types: piezoresistive, capacitive, bellows-type, and surface acoustic wave-type. These sensors are devices that detect the absolute pressure in the intake manifold behind the throttle. They are connected to the intake manifold via a vacuum tube. As the engine operates under different speeds and loads, the sensor detects changes in the vacuum within the intake manifold. The internal resistance of the sensor changes accordingly, converting this into a voltage signal for the ECU to adjust fuel injection quantity and ignition timing. The intake manifold absolute pressure sensor detects changes in the absolute pressure within the manifold based on engine speed and load, converting these changes into a signal voltage sent to the engine control unit (ECU). The ECU then uses this signal voltage to control the basic fuel injection quantity.

8

1

Share

What are the reasons for the inability to drive when shifting gears?

The reasons for the inability to drive when shifting gears are: 1. Transmission oil pan leakage, causing all hydraulic oil to drain out; 2. The linkage or cable between the control lever and the direct-acting valve rocker arm is loose or detached; 3. The oil pump inlet filter screen is clogged; 4. Severe leakage in the main oil circuit; 5. The oil pump is damaged. Gear shifting refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the different requirements of driving wheel traction and speed under various driving conditions such as starting, accelerating, driving, and overcoming road obstacles. It allows the car to drive at a very low stable speed, which is difficult to achieve solely by the stable speed of the internal combustion engine.

8

2

Share

How to Replace the Battery in a Haval Car Key?

The method to replace the battery in a Haval car key is as follows: 1. Open the upper shell of the key to see the interior; 2. Use a flathead screwdriver to pry open the brand logo cover plate; 3. Unscrew the screw on top; 4. Open the upper part of the key; 5. Rotate and open the outer shell of the upper part; 6. Replace with the prepared battery and reinstall the cover plate. Haval's models include: Haval H6, Haval H2, Haval F7, Haval Big Dog, Haval F9, etc. Taking the 2021 Haval F7 as an example, it is a compact SUV with body dimensions of: length 4620mm, width 1846mm, height 1690mm, wheelbase 2725mm, minimum ground clearance 169mm, and body weight 1600kg.

3

0

Share

How to Identify the Vehicle's Emission Standard Level?

Methods to identify a vehicle's emission standard level are: 1. Check the Motor Vehicle Conformity Certificate. Vehicles are delivered with this certificate upon manufacture, which clearly states the emission standard; 2. Refer to the onboard inventory list. Locate the emission standard in the vehicle information section; 3. Examine the Certificate of Conformity, which includes exhaust emission details with corresponding standard markings; 4. Query via the Motor Vehicle Environmental Protection Website. Access the public inquiry platform at the bottom of the homepage, enter the vehicle's VIN code and the last 6 digits of the engine number to retrieve the information; 5. Inspect the vehicle's environmental protection label. The reverse side of the label affixed to the windshield displays the emission standard prominently.

12

3

Share

How to Operate a Volkswagen Automatic Transmission Car?

Volkswagen automatic transmission cars are operated as follows: 1. Press the brake pedal to start the vehicle; 2. Shift the gear into D (Drive) and release the electronic parking brake; 3. Release the brake pedal to allow the vehicle to move. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Volkswagen models equipped with automatic transmission include the Beetle, Phaeton, Golf, Volkswagen CC, Tiguan, Passat, Scirocco, etc. Taking the 2020 Passat as an example, it belongs to the mid-size sedan category with body dimensions of 4933mm in length, 1836mm in width, 1469mm in height, a wheelbase of 2871mm, and a curb weight of 1470kg.

20

5

Share

How to Solve Carbon Deposit Issues in BMW Intake Valves?

What are the body dimensions of the GAC Trumpchi GS3?

What are the types of intake manifold absolute pressure sensors?

What are the reasons for the inability to drive when shifting gears?

How to Replace the Battery in a Haval Car Key?

How to Identify the Vehicle's Emission Standard Level?

How to Operate a Volkswagen Automatic Transmission Car?

Should Haval Big Dog Use 92 or 95 Octane Gasoline?

How many cylinders does the Lynk & Co 03 2.0t engine have?

How Many Kilometers Count as the Break-in Period?

Does the Air Conditioning Evaporator Need Cleaning?