How to Shorten the Roof Antenna on a Nissan X-Trail?

1 Answers
SanCamilla
07/28/25 7:25pm
First, prepare a wrench and a shark fin antenna of the same model. Remove the reading light above the rear seat inside the car. After removing the headlight, you will see the antenna screw. Unscrew the base screw of the antenna and remove the antenna along with its base. Secure the antenna spring with the screw from the shark fin antenna and ensure it is tightly fastened. Directly cover the shark fin antenna over the original car antenna and mark the position with a pen. Finally, apply glue to the marked position on the roof and firmly press the shark fin antenna back and forth to ensure it is securely fixed.
Was this review help?
11
0
Share
More Forum Discussions

How to Install a Car Wash Water Gun?

Here is the installation method for the car wash water gun: 1. Select the appropriate faucet adapter based on the faucet's diameter and attach it to the faucet; 2. Install quick-connect fittings on both ends of the hose and gently tighten the nuts; 3. Connect the faucet adapter and the spray gun adapter respectively. A clicking sound indicates successful installation. Here is some related information: 1. Most spray guns offer various spray patterns to choose from, such as high-pressure rinse, gentle rinse, high-pressure jet, and sharp jet. 2. When washing the car, adjust the spray gun's water output function according to different needs, then press the spray gun handle to release water. If the inner buckle ring of the handle is lifted and secured, the water flow will continue automatically after releasing the handle.
7
4
Share

How to Identify if a Used Car is an Accident Vehicle?

Methods to identify an accident vehicle: 1. Minor rear-end collisions are one of the frequent accidents during vehicle use. To check for such incidents, start from the front part of the car. First, open the engine hood and inspect whether the edge sealing strips are smooth and feel soft to the touch. If the strips are uneven or feel soft, it indicates that the engine hood has been repaired. 2. The main frame and the subframe of the vehicle are key indicators of severe rear-end collisions. If weld marks are found on the main frame, it confirms that the car has suffered a severe impact. The two small spiral-shaped boxes on the shock absorber must also have original factory sealant. If non-original sealant is present, it indicates a rear-end collision, and the judgment method is the same as above. Additionally, all rivets on the radiator frame should be machine-driven and made of iron. If they are replaced with aluminum rivets, it can also be concluded that the car has been in an accident.
15
0
Share

What are the reasons for compressor failure?

There are 4 main reasons for compressor failure: 1. Electrical system malfunction. Short circuits or open circuits in the wiring directly interrupt power transmission, preventing the electromagnetic clutch from properly controlling the compressor's operation. 2. Refrigerant deficiency. Since refrigerant and compressor oil are mutually soluble, they circulate back to the compressor through the system. If the Freon in the refrigerant is depleted, it will cause insufficient oil return, leading to poor lubrication and eventual compressor seizure. 3. Mechanical wear of compressor components. Prolonged high-speed operation under load may cause premature mechanical fatigue of compressor parts, resulting in failure. 4. Over-tightened drive belt. An excessively tight belt can directly cause the compressor to jam. Therefore, regularly check belt tension. Conversely, an overly loose belt will cause power transmission slippage, resulting in intermittent cooling performance and reduced efficiency.
7
3
Share

Is a 13-year-old car still exempt from inspection in 2019?

A 13-year-old car in 2019 needs to undergo an inspection at the testing station, as new cars are exempt from inspection for the first six years. Here is the relevant information: 1. During the annual inspection, the car must go through the testing station, where professional staff and equipment are responsible for checking the vehicle. The inspection includes testing exhaust emissions, the lighting system, the braking system, the chassis, and the exterior. 2. If the exterior has been modified, the car will not pass the inspection. Therefore, avoid making unauthorized modifications to your vehicle during regular use. 3. Before the annual inspection, check the car's lighting system in advance. If any lights are damaged, repair them beforehand to avoid complications. 4. If the car has not been serviced for a long time, consider getting it serviced before the inspection. During regular use, avoid using low-quality gasoline, as it can lead to increased carbon deposits in the engine, which is harmful to the engine.
6
5
Share

Is the 2021 X-Trail transmission the same as the 2020 model?

2021 X-Trail transmission is the same as the 2020 model. The function of the transmission: to change the transmission ratio to expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The following is a related introduction to the X-Trail: 1. The length, width, and height of the X-Trail are 4675mm, 1820mm, and 1722mm respectively, with a wheelbase of 2706mm, a minimum ground clearance of 208mm, and a fuel tank capacity of 65 liters. 2. In terms of power, the X-Trail is equipped with a 2.0L naturally aspirated engine, with a maximum power of 111kW and a maximum torque of 194Nm, paired with a CVT continuously variable transmission.
13
2
Share

How to Exit Cruise Control?

Press the cruise control switch (control) button to turn off the cruise control function. The cruise control buttons are usually located near the steering wheel and mainly come in three types: lever-style, steering wheel button-style, and steering wheel control group-style. The specific operation methods are as follows: 1. Press the power button to activate the system, and the cruise control indicator light on the dashboard will illuminate; 2. Accelerate to the desired speed and press the SET button. At this point, you can release the accelerator pedal with your right foot, and the speed will be maintained at the current level; 3. You can fine-tune the speed using the "RES+" and "SET-" buttons; 4. There are three ways to deactivate cruise control: stepping on the brake, pressing the cancel (CANCEL) button, or pressing the power (ON/OFF) button; 5. If cruise control is canceled by stepping on the brake or pressing the cancel button, you can press the RES button to resume the previous cruise control speed.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.