How to Shift to Neutral on an International Shift Pattern?

Where to Install Car Door Anti-Collision Strips?

Car door anti-collision strips are installed on the protruding corners of the vehicle. Made of rubber or natural rubber, these strips are part of the exterior trim and primarily protect the car body from minor scratches and damage to components. The installation steps for car door anti-collision strips are as follows: 1. Open the car door and locate the protruding areas prone to collisions; 2. Wash the car with water and dry the area where the strip will be applied with a towel; 3. Slowly peel off the backing adhesive; 4. Align the strip and press gently to ensure full adhesion to the car surface; 5. Avoid washing the car within 48 hours after installation to prevent the adhesive from losing its bonding strength due to moisture.

13

2

Share

How to Eliminate the Engine Malfunction Indicator Light?

The method to eliminate the engine malfunction indicator light is: start and turn off the engine three times in a row, disconnect the negative terminal of the engine battery, wait for about 30 seconds, and then reconnect it. The reasons for the engine malfunction indicator light to turn on include: 1. Sensor issues: When the water temperature, crankshaft position, air flow, or oxygen sensors are damaged, have poor contact, or signal interruption, the ECU cannot accurately obtain engine data; 2. Fuel quality issues: The gasoline grade added does not meet the specified requirements, causing engine wear; 3. Maintenance issues: Not maintaining the engine on schedule and poor driving habits increase the burden on engine operation.

16

4

Share

What is the appropriate tire pressure for the Elantra?

The appropriate tire pressure for the Elantra is between 2.3 and 2.5 bar. Tire pressure refers to the air pressure inside the tires. The Elantra is a compact sedan produced by Beijing Hyundai. Taking the 2020 Elantra Manual Smart Style model as an example, its body dimensions are: length 4610 mm, width 1800 mm, height 1450 mm, with a wheelbase of 2700 mm. The 2020 Elantra Manual Smart Style model is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 115 hp, with a maximum power speed of 6300 rpm and a maximum torque speed of 4500 rpm. It features a MacPherson strut front suspension and a torsion beam non-independent rear suspension.

2

5

Share

How to Repair Bird Droppings Corrosion on Car Paint?

Bird droppings corrosion on car paint can be repaired by: 1. Using polishing wax; 2. Sanding the cracked paint film area to expose a complete surface, then repainting. Methods for maintaining car paint include: 1. Promptly removing dust from the car body to minimize static electricity's attraction of dust; 2. Rinsing rain stains with clean water as soon as possible after rain to avoid damaging the paint; 3. Avoiding washing the car under direct sunlight or high temperatures; 4. Using clean, soft cloths or sponges for washing to prevent mixing in metal shavings and sand particles that could leave scratches; 5. Promptly removing highly corrosive stains to keep the paint clean and aesthetically pleasing.

14

1

Share

What Causes the Squeaking Sound When Braking to the Full Extent?

The reasons for the squeaking sound when braking to the full extent are: 1. Excessive wear of the brake disc and brake pads; 2. Abnormal installation of the brake pads; 3. Presence of foreign objects on the brake pads and brake disc; 4. Poor retraction of the caliper can cause prolonged friction between the disc and pads. Methods for brake maintenance include: 1. Regularly check the thickness and wear of the brake pads, and ensure they retract freely; 2. Replace them promptly when wear reaches the limit to avoid reduced braking effectiveness and compromised driving safety; 3. Use original equipment manufacturer (OEM) provided brake pads for replacement; 4. Use specialized tools to retract the brake caliper piston during replacement; 5. After replacement, press the brake pedal several times to eliminate the gap between the pads and the brake disc.

4

3

Share

How Often Should You Start Your Car?

A car should be started approximately every two weeks. The effects of not starting it for a long time include: 1. Premature failure, aging, and oil leakage of oil seals; 2. Shortened battery life; 3. Deformation of the tire contact area due to pressure; 4. Malfunction of electronic components; 5. Oxidation and corrosion of engine parts by oil; 6. Aging of the braking system. Precautions for long-term parking of a car include: 1. Clean and maintain the car before parking; 2. Park the car in a garage or in a dry and cool place as much as possible; 3. Regularly check the tire pressure and inflate in time if the pressure is insufficient, paying attention to the aging condition of the tires; 4. Before parking the vehicle, carefully check the items inside the car and do not leave food, drinks, or food packaging waste.

4

Share

How to Shift to Neutral on an International Shift Pattern?

Where to Install Car Door Anti-Collision Strips?

How to Eliminate the Engine Malfunction Indicator Light?

What is the appropriate tire pressure for the Elantra?

How to Repair Bird Droppings Corrosion on Car Paint?

What Causes the Squeaking Sound When Braking to the Full Extent?

How Often Should You Start Your Car?

What is the tire brand of the Trumpchi GS3?

How to Distinguish Domestic Cars from Imported Cars?

What Components Make Up a New Energy Vehicle?

Why does the GSX250 make loud shifting impact noises?