How to Shift from D to S Gear in the 2021 Sagitar?

2 Answers
DelAlexander
08/27/25 5:53am
Steps to shift from D to S gear in the 2021 Sagitar: 1. Depress the brake pedal to decelerate the vehicle; 2. Park the vehicle on a safe road surface; 3. Check that the car's instrument speed shows zero; 4. Push the gear lever from D to S position; 5. Press the accelerator pedal to continue driving. The 2021 Sagitar is a compact car with body dimensions of: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, minimum ground clearance 108mm, and a body weight of 1355kg. The 2021 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension, with a front-wheel-drive layout. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, maximum torque of 175Nm, and maximum power of 85kW, paired with a 5-speed manual transmission.
Was this review help?
10
0
Share
StEleanor
09/09/25 4:49am
I've driven the 2021 Sagitar many times, and shifting from D to S mode is actually quite simple. While driving, as long as the vehicle is in motion, there's no need to stop. Just pull the gear lever backward from the D position, and it will automatically switch to S mode. At this point, an S icon will light up on the dashboard to indicate the shift. Using S mode increases the engine RPM, making acceleration response quicker, which is especially useful for overtaking or climbing hills, though it does consume more fuel than D mode. Remember not to shift gears abruptly during high-speed acceleration, as it's not good for the car. For regular city driving, sticking to D mode for better fuel efficiency is sufficient. If it feels unfamiliar at first, practicing the shift at low speeds a few times will make it feel natural. Overall, it's a great feature that, when used properly, can enhance driving pleasure without harming the car.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What is the basic introduction to car tire knowledge?

Tire knowledge introduction is as follows: 1. Tire classification: Can be divided into radial tires and bias tires. 2. Tread classification: Can be divided into rib tread tires, transverse tread tires, mixed tread tires, and off-road tread tires. 3. Type classification: Tires can be roughly classified into 8 types by vehicle type. Namely: PC - Passenger car tires; LT - Light truck tires; TB - Truck and bus tires; AG - Agricultural vehicle tires; OTR - Off-the-road tires; ID - Industrial vehicle tires; AC - Aircraft tires; MC - Motorcycle tires. 4. Size classification: 1) Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other 4 tires on the vehicle, and it can replace any temporarily or permanently unusable tire. 2) Non-full-size spare tire: The diameter and width of this spare tire are slightly smaller than the other 4 tires, so it can only be used as a temporary replacement, and only for non-driving wheels, with a maximum speed not exceeding 80km/h.
10
3
Share

What are the reasons for a car's air conditioner to freeze up?

Car air conditioner freezing can be caused by the following reasons: 1. Compressor failure: Long-term use may reduce the compressor's efficiency, or damage to the compressor's air distribution system can lead to excessively low pressure, causing icing. The freezing usually occurs in the front part of the evaporator. 2. Excessive refrigerant: Some air conditioners may have refrigerant refilled due to relocation or leakage. Improper handling by maintenance personnel can result in too much refrigerant, leading to excessive refrigerant flowing to the rear part of the evaporator and causing freezing. This type of ice often forms at the rear part of the evaporator and around the compressor's return pipe. 3. Dirty evaporator: After prolonged use, dust from the air or microorganisms generated by the evaporator can accumulate on the evaporator, obstructing airflow, reducing heat exchange, and causing the evaporator temperature to drop too low, resulting in freezing. The freezing typically occurs in the rear part of the evaporator.
17
0
Share

What is the reason for only reaching 4000 RPM when pressing the accelerator to the floor?

Pressing the accelerator to the floor and only reaching 4000 RPM might be due to revving in neutral, which is a normal phenomenon. This does not indicate any issues with the engine itself, so there is no need for special concern. This is an idle protection feature, meaning that when the vehicle is stationary and not moving, pressing the accelerator to the floor will typically only reach around 3500 to 4000 RPM. Below is an extended explanation: 1. The relationship between the accelerator and RPM: The more the accelerator is pressed, the more the air-fuel mixture increases, causing the pistons to reciprocate faster and the RPM to rise. 2. Introduction to the accelerator: The accelerator, also known as the throttle pedal, is part of the car's fuel supply system. By controlling the amount of pedal depression, it regulates the opening of the engine's throttle valve, the intake air volume, and the fuel injection controlled by the ECU, thereby managing the engine's RPM.
18
4
Share

Why is there a bad smell in the car after washing it?

After washing the car, there is an odor, which is the smell of the foam cleaner used to clean the interior. Simply ventilate the car to remove it. Here are specific methods to eliminate the odor: 1. Simple ventilation: When the windows are closed, the confined space causes the odor to become concentrated. Opening the windows to allow air circulation is a simple and effective solution. 2. Essential oil fragrance to remove odor: Using plant essential oil fragrances can quickly eliminate the odor. 3. Fruits and plants to remove odor: Fruits like pomelo, pineapple, and orange not only have strong absorption capabilities but also emit pleasant fruity aromas, improving the air quality in the car while removing odors.
8
0
Share

Why Don't Japanese Cars Use Electronic Gear Shifters?

Japanese cars prioritize safety performance and do not focus on designing standout gear shifter technology. Instead, they enhance safety features in other aspects of the vehicle, which is why Japanese cars do not use electronic gear shifters. Below is an extended explanation: 1. High failure rate of electronic gear shifters: Although electronic gear shifters sound high-end, in theory, they operate on the same principle as mechanical gear shifters, just with a different method of use. While electronic gear shifters appear compact and user-friendly, they contain more internal components, leading to a higher failure rate in vehicles. 2. Troublesome repairs: Electronic gear shifters have more components compared to the simpler internal structure of mechanical gear shifters. If an issue arises, mechanical gear shifters allow for immediate identification of the root cause, making repairs easier. In contrast, electronic gear shifters are slower to diagnose, more inconvenient to repair, and come with significantly higher repair costs.
1
5
Share

Why Are There Ripples After Painting?

Ripples after painting may be caused by issues with the paint film thickness, leading to insufficient leveling of the paint, which results in an uneven surface appearance. Car paint itself is quite fragile—even the evaporation of ordinary water droplets can leave watermarks. For paint that is smooth and well-maintained, if the water droplets contain low levels of acidic or alkaline substances, it is advisable to avoid washing the car outdoors in hot weather. After washing, the car body should be dried, and after rain, it's best to wash the car as soon as possible. Below is a detailed explanation: Ripples (Watermarks): The chemicals in watermarks continue to react with the car paint under sunlight as the car body heats up, thereby worsening the condition. Oxidized cars, those frequently washed with detergent, and cars with cracked paint are more susceptible to watermark damage.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.