How to set up the tire pressure monitoring system in Lavida?

1 Answers
Peterson
07/29/25 5:44pm
Steps to set up the tire pressure monitoring system in Lavida: After ignition, press and hold the SET button of the tire inflation pressure control system. Wait until the indicator light comes on, inflate all tires to the specified pressure, turn on the ignition switch, press and hold the SET button, the warning light on the instrument panel will illuminate, and it will turn off after confirming the storage of new parameters. The dimensions of Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. The maximum speed is 200km/h, the body structure is a 4-door 5-seater sedan, and the environmental standard complies with the China VI emission standard.
Was this review help?
19
4
Share
More Forum Discussions

Is It Normal for the Malfunction Indicator Light to Illuminate in a New Car?

It is normal for the dashboard indicator lights to illuminate when the ignition switch is turned on. This is the vehicle's system performing a self-diagnosis, and the lights will automatically turn off after a period of time. However, if any of the following malfunction indicator lights remain illuminated, it indicates a fault in the corresponding system. Immediate inspection and repair are recommended to avoid safety hazards. For new cars, warranty claims may apply. Common malfunction indicator lights and their causes are as follows: 1. Engine Malfunction Light: Poor combustion condition, engine knocking, poor fuel quality, excessive engine carbon buildup. 2. Battery Fault Light: Battery depletion or failure, power system malfunction. 3. Oil Warning Light: Insufficient oil level, excessively high engine temperature, inappropriate oil selection, clogged oil passages. 4. Tire Pressure Warning Light: Tire puncture or air leakage, damaged tire pressure sensor. 5. Brake System Fault Light: Parking brake not released, ABS function failure, non-compliant brake fluid, abnormal brake system. 6. Coolant Temperature Warning Light: Excessively high engine coolant temperature, insufficient coolant, thermostat failure, damaged coolant temperature sensor.
16
0
Share

How to Register Vehicle Modifications?

Vehicle owners must complete the Motor Vehicle Modification Registration Application Form and submit a series of documents to the local Vehicle Management Office, including the identity proofs and copies of the owner and the agent, the vehicle registration certificate, and the vehicle license. Below is a detailed introduction to vehicle modifications: 1. Traffic Management Department Approval: If modifications are needed, approval must be obtained from the traffic management department before proceeding to a professional vehicle modification service. Changing the vehicle logo, adding lighting devices, installing xenon lights, etc., which alter the original characteristics of the vehicle, are considered illegal. Modifications can only be carried out after approval from the Vehicle Management Office. Bring your ID card, driver's license, vehicle license, and pictures of the modified vehicle to the Vehicle Management Office to complete the registration process, with a fee of several hundred yuan. 2. Application for Change Registration: The owner must apply for a change registration at the Vehicle Management Office within 10 days after the modification. The Vehicle Management Office must process the relevant procedures on the same day, including annotating the changes in the vehicle registration certificate, retrieving the old vehicle license, and issuing a new one. In other words, vehicle owners must first apply to the Vehicle Management Office if they wish to modify their vehicles.
20
3
Share

Can I directly apply for a B2 driver's license now?

You can directly apply for a B2 driver's license. Below are the specific details about the B2 driver's license: 1. Permitted Vehicle Types: The B2 license allows you to drive medium and heavy-duty trucks or specialized operation vehicles, as well as small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, and wheeled self-propelled machinery. The B2 license does not permit driving passenger buses or tow trucks. Driving a tow truck requires an A2 license, while driving a passenger bus requires a B1 license. If you want to drive both passenger buses and trucks, you need to apply for a B1 or A2 license. 2. Application Method: The B2 driver's license can be applied for when initially applying for a driver's license, or it can be upgraded from a lower-level license. Regardless of the method, you need to submit an application to the local vehicle management office in your registered residence, then undergo a physical examination as required, and proceed to a driving school for study and testing.
3
0
Share

How much tax is required for a 20,000-yuan motorcycle?

The purchase tax for motorcycles is 10% of the vehicle price. Below is a detailed introduction to the fees required when purchasing a vehicle: 1. Vehicle Purchase Tax: According to national regulations, any vehicle driven on the road must pay a vehicle purchase tax. Currently, the purchase tax rate is 10% of the vehicle's ex-factory price. The more expensive the vehicle purchased by the consumer, the higher the purchase tax required. 2. Insurance: Vehicle insurance includes compulsory traffic insurance and commercial insurance. Compulsory traffic insurance must be purchased, with a nationally unified premium standard, although the number of seats in the vehicle affects the amount of compulsory insurance. Commercial insurance can be purchased voluntarily, and the price varies depending on the type of coverage chosen. 3. Vehicle and Vessel Tax: The vehicle and vessel tax depends on the engine displacement of the vehicle. Generally, the larger the engine displacement, the higher the vehicle and vessel tax required.
4
3
Share

How to Turn on the Cold Air in a Volkswagen Passat?

Here's how to turn on the cold air in a Volkswagen Passat: 1. Manual Air Conditioning: First, turn on the fan, then press the A/C switch (the light should be on) and adjust the temperature to a suitable level (blue indicates cooling). 2. Automatic Air Conditioning: Press the AUTO button for the air conditioning to work automatically. First, turn on the fan, then press the A/C switch (the light should be on) and adjust the temperature to a suitable level (set the desired temperature). Additional Information: Correct Usage of Car Air Conditioning: 1. Generally, the left button with blue represents cold air, red represents warm air, and the middle represents a moderate temperature. 2. To turn on the cold air, adjust the left button towards the blue area. For warm air, adjust it towards the red area, then press the AC switch. The middle button controls the fan speed, and the rightmost button adjusts the mode, allowing you to direct air to the feet, hands, or windshield, or use two modes simultaneously. 3. The white line on the left adjusts the temperature. If it feels too warm, adjust it to the middle. To turn off the air conditioning without turning off the fan, simply close the middle fan.
4
1
Share

How are spark plug grades classified?

Currently, spark plugs come in various material grades, each with different performance characteristics and replacement intervals. They can be broadly categorized into: nickel alloy spark plugs, platinum spark plugs, and iridium spark plugs. From a manufacturing process perspective, there are thick electrode spark plugs, needle electrode spark plugs, double platinum spark plugs, iridium-platinum spark plugs, and double needle iridium spark plugs, among others. Additional information: 1. Function of spark plugs: The material of spark plugs usually refers to the electrode material. Currently, platinum and iridium spark plugs are considered the best. Platinum and iridium are precious metals with excellent resistance to high temperatures, high pressure, and corrosion. Using these materials for spark plugs can significantly extend their service life, but they are also more expensive. 2. Replacement intervals for spark plugs: Nickel alloy spark plugs should be replaced every 20,000 to 30,000 kilometers, nickel-yttrium alloy spark plugs every 30,000 kilometers, platinum spark plugs every 40,000 kilometers, double platinum spark plugs every 60,000 kilometers, iridium spark plugs every 80,000 kilometers, and platinum-iridium alloy spark plugs can last up to 100,000 kilometers before needing replacement.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.