How to set up the reversing camera on Volvo S60?
3 Answers
Volvo S60's reversing camera does not require manual setup. Once the wiring is properly connected, the system will automatically switch to the reversing camera view when reversing. The Volvo S60 has the following dimensions: length 4761mm, width 1850mm, height 1437mm, with a wheelbase of 2872mm and a trunk capacity of 391 liters. The Volvo S60 is equipped with a 2.0T turbocharged engine that delivers a maximum power of 120kW at 5000rpm, and a maximum torque of 265Nm between 1600 to 3800rpm. It is paired with an 8-speed automatic transmission.
Setting up the Volvo S60's reversing camera is actually quite simple! I've been driving this car for a while now. Usually, after starting the vehicle, try shifting into reverse gear first—the reversing camera will automatically display on the central control screen. If it doesn't appear, open the vehicle settings menu on the screen and navigate to "Reverse Assist" or a similar option, where you can adjust the camera's brightness, contrast, or guide lines. Don't forget to check if the camera lens is clean, as too much dust can affect the image. I also recommend periodically checking for software updates, which can optimize the display quality. Additionally, if the camera angle is off, some models allow calibration by long-pressing a specific area on the screen to ensure full coverage of the rear view. In short, the whole process takes just a few minutes, and the key is to practice a few times to get the hang of it.
I recently set up the reversing camera on my Volvo S60, mainly through the central control system. After starting the car, simply tap the settings button at the bottom of the screen and look for the "Camera Management" option under "Vehicle System." Once inside, you can enable or disable the automatic activation of the reversing camera, as well as adjust the display size and warning sound settings. I found that adjusting the brightness makes reversing at night much clearer. Also, be sure not to place any decorations near the camera that might block its view. If the camera doesn’t respond when shifting into reverse, it might be due to a software bug or a loose camera connection—usually restarting the car fixes it. Regularly cleaning the lens can also improve image quality, which is quite practical.
