How to Set Up the Reversing Camera on BMW 3 Series?

1 Answers
DelRobert
07/29/25 3:55pm
The reversing camera for BMW can be configured in the factory settings menu under the general settings on the display screen. Below are the functional features of the BMW 3 Series reversing camera: 1. The system supports a wide voltage input range of 11-32V and can connect up to 4 camera signals, making it widely applicable for various vehicles. It is suitable for unstable cold-start power supply voltages, features strong anti-interference capabilities, and includes built-in overheating and overcurrent protection. 2. It supports 4-screen split functionality, allowing users to choose between single-screen and 4-screen views. 3. It includes 4 sets of forced start signals, labeled as CAM1, CAM2, CAM3, and CAM4, with reversing priority. In any state, the system automatically switches to the reversing view when reversing and restores the original state after reversing is completed, achieving automatic wake-up for reversing. The priority order is CAM1 > CAM2 > CAM3 > CAM4. 4. Users can individually set the 4-screen view to mirror or non-mirror mode. 5. It comes with video signal output (for external car recorders/displays).
Was this review help?
10
3
Share
More Forum Discussions

Should You Step on the Gas When Overtaking in Subject Three?

When performing an overtaking maneuver in Subject Three, you should lightly press the gas pedal. If you don’t accelerate while changing lanes to overtake, the speed will be too low, causing a mismatch between the gear and speed, which will result in an immediate failure during the test. Upon hearing the voice prompt "Please complete the overtaking action," the candidate should turn on the left turn signal (for more than 3 seconds) and simultaneously observe the traffic situation behind through the left rearview mirror. Only after confirming it is safe should the candidate turn the steering wheel to the left and enter the left lane to overtake. Below are some tips for the Subject Three test: Follow the voice instructions: Listen carefully to the voice prompts during Subject Three and act accordingly. Do not perform any actions before the voice prompt ends; wait until it finishes before proceeding. Pay attention to special zones: In many areas, the voice prompts no longer remind candidates of special zones such as school areas, bus stops, and crosswalks. However, candidates must still slow down or yield based on the project signs and road markings. In school zones, apply the brakes within 10 meters of the sign, keeping the speed below 30 km/h. At bus stops, apply the brakes within 10 meters of the sign, maintaining a speed below 30 km/h. Before a crosswalk, slow down by applying the brakes within 30 meters, and stop to yield if pedestrians are crossing.
10
1
Share

What gear should you use when crossing an intersection in Subject 3?

When crossing an intersection in Subject 3, there are several scenarios to consider. Green light with no pedestrians passing: When in 4th or 5th gear, the correct approach is to slow down, shift to 3rd gear, look left and right, and be prepared for a sudden light change or pedestrians. Green light with no pedestrians passing: When in 3rd gear, release the accelerator, lightly apply the brake, and look left and right. Green light with pedestrians passing or red light: Press the clutch, gently apply the brake to coast at low speed to the stop line, then press the brake to stop, release the clutch, release the brake, and wait patiently. Below are some tips for the Subject 3 test: Follow the instructions: Listen carefully to the voice prompts during Subject 3 and act accordingly. Do not perform any actions before the voice prompt ends; always wait until the prompt is complete before proceeding. Pay attention to special zones: In many areas, the voice prompts no longer remind you of special zones such as school zones, bus stops, and crosswalks. However, candidates must still perform corresponding deceleration or yielding operations based on the project signs and road markings. For school zones, apply the brake within 10 meters of the project sign, keeping the speed below 30 km/h. For bus stops, apply the brake within 10 meters of the project sign, keeping the speed below 30 km/h. For crosswalks, apply the brake to decelerate within 30 meters before the crosswalk, and stop if there are pedestrians crossing.
12
4
Share

What is the start-stop and engine shutdown process for a Mercedes-Benz vehicle?

Mercedes-Benz vehicle start-stop and engine shutdown process: 1. To park and shut down the engine, first press the brake pedal to bring the vehicle to a complete stop. Once the vehicle is stationary, shift into P gear, engage the parking brake, and then turn off the engine. 2. Most Mercedes-Benz vehicles are equipped with a one-touch start system and an electronic parking brake, so engaging the parking brake simply requires pressing the parking brake button, and turning off the engine only requires pressing the start button. 3. The one-touch start button is labeled "start or stop," indicating that both starting and stopping the engine are performed using this button. 4. When parking, always shift into P gear; otherwise, the engine cannot be shut down. 5. Automatic transmission vehicles have both P gear and N gear, both of which can be used when parking. 6. There is a fundamental difference between P gear and N gear: P gear has a locking mechanism, while N gear does not. 7. When parking and shutting down the engine, shift into P gear. 8. If the vehicle is shifted into N gear when parking, the vehicle can still move if the parking brake is not engaged. 9. N gear can be used when waiting at a red light or during a short stop without shutting down the engine, while P gear should be used when parking and shutting down the engine. 10. P gear and N gear have different application scenarios, so please pay attention to this, everyone.
14
5
Share

Which lane to enter when making a right turn in Subject 3?

In Subject 3, turn left into the fast lane and turn right into the slow lane. The road driving skill test content of Subject 3 generally includes: preparation before getting on the car, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, parking on the side, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stations, meeting vehicles, overtaking, making U-turns, and driving at night. Here are some tips for the Subject 3 test: Follow the prompt instructions: Listen carefully to the voice broadcast instructions of Subject 3, and then follow the prompt instructions. Remember not to perform operations in advance before the voice broadcast ends. You must wait until the voice broadcast ends before proceeding to the next step. Pay attention to special areas: In many areas, the voice broadcast no longer reminds special areas such as school zones, bus stations, and pedestrian crossings, but candidates must make corresponding deceleration or avoidance operations based on the project signs and road markings on the roadside. In school zones, step on the brake 10 meters away from the project sign, and the speed should be below 30km/h. At bus stations, step on the brake 10 meters away from the project sign, and the speed should be below 30km/h. Within 30 meters before a pedestrian crossing, step on the brake to decelerate, and stop to yield if there are pedestrians passing.
13
2
Share

What Causes the Burning Smell During Sudden Acceleration in an Automatic Transmission?

Experiencing a burning smell when abruptly pressing the accelerator in an automatic transmission doesn't necessarily indicate component damage. High engine RPM during sudden acceleration can produce this odor. Below are relevant explanations: Transmission Overheating: If the automatic transmission is a dry dual-clutch type, the clutch plates may overheat after aggressive driving, emitting a burning smell that dissipates once temperatures normalize. First-Time Heating of New Car Plastic Parts: In new vehicles, plastic components in the engine bay may release a plastic odor during initial heating, which is normal and fades over time. Tire Overheating: Aggressive driving raises tire temperature and causes wear, leading to a similar burning rubber smell from the heated tires.
7
1
Share

How much fuel can the Geely Binyue's fuel tank hold?

Geely Binyue's fuel tank can hold approximately 40 liters of fuel, with a total capacity of 45 liters. The Geely Binyue is a compact SUV. Taking the Binyue 2020 Manual Archer as an example, its body dimensions are: length 4330 mm, width 1800 mm, height 1609 mm, wheelbase 2600 mm, and curb weight 1310 kg. The Binyue 2020 Manual Archer is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum power of 104 kW at 5200 rpm and a maximum torque of 235 Nm between 1600 to 4000 rpm.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.