How to set up the one-touch power window for the Trumpchi GS5?
3 Answers
Here are the steps to set up the one-touch power window for the Trumpchi GS5: 1. With the ignition switch in the ON/RUN position, press and hold the power window switch. 2. When the window is fully open, pull up the power window switch until the window is completely closed. 3. After the window is fully closed, continue to hold the switch up for about 2 seconds. At this point, the window programming is complete. 4. Repeat the above steps for the other windows. Here is more information about the Trumpchi GS5: 1. The Trumpchi GS5 is a stylish urban SUV model newly developed by GAC Motor on a high-performance European chassis. 2. The Trumpchi GS5 engine comes with two displacement options: 2.0L and 1.8T, and two systems: two-wheel drive and four-wheel drive. 3. The 2.0L model of the Trumpchi GS5 is equipped with a 2.0L-DCVVT engine, which adopts DCVVT intelligent continuous variable valve timing technology for both intake and exhaust. It can output nearly 90% of the maximum torque at around 2200 rpm, which is commonly used in urban driving conditions, enhancing the acceleration feel at startup. 4. The 1.8T engine of the Trumpchi GS5 utilizes the latest global turbocharged intercooling technology and is equipped with a BorgWarner Turbo, which can continuously output a powerful torque of 237Nm within the range of 1700～5250r/min.
I just set up the one-touch window lift for my friend's Trumpchi GS5, and this feature is really practical. The specific steps are: First, start the car or turn the ignition to the ON position, then locate the window switch on the driver's side door panel. Press and hold the window lift button for the glass you want to set, raise the window all the way to the top, and keep holding for 5 to 10 seconds. At this point, you'll hear a click sound as a prompt, and the window will automatically lower slightly before rising again. This completes the memory setting. Afterward, you only need to lightly tap the switch, and the glass will automatically rise to the top. All four windows can be set individually this way—it's recommended to set the driver's side first before trying the others. It's especially convenient on rainy days; just press once to automatically close the window.
My GAC Motor GS5 came with one-touch window closing feature, which can actually be manually activated on almost all trim levels. The key is to let the vehicle relearn the window top position: first lower the window halfway, then press and hold the window-up button until the window is fully closed, and continue holding for about 5 seconds. Make sure other windows are closed during setup to avoid signal interference. If setup fails, it's recommended to disconnect the battery negative terminal for one minute and try again, or visit a 4S shop for a diagnostic computer reset. This feature is especially useful in open parking lots—just press the button and walk away without waiting for the windows to close completely.
