···
Log in / Register

How to set up the horn sound when locking the 10th generation Accord?

1 Answers
RobertRose
07/23/25 7:49pm

The 10th generation Accord does not have the feature of sounding the horn when locking the car by default, unless it is installed additionally at a 4S shop. After locking the car, pressing the lock button on the smart key twice in a row will trigger the horn sound. Below is some relevant information: 1. The 10th generation Accord does not have an automatic locking feature by default. To have this function, you need to visit a Honda 4S shop to update the program. 2. Some cars have certain features hidden by the manufacturer at the time of production to differentiate between high, mid, and low-end models. Owners can activate these hidden functions by updating the program themselves. If you prefer not to update the program, you can install a device that plugs into the car's OBD interface. Once installed, the 10th generation Accord can achieve the automatic locking function.

Was this review help?
18
4
Share
More Forum Discussions

Where is the hazard warning light and how to turn it on?

The hazard warning light is located on the center console, marked by two overlapping red triangles. Turn on the hazard lights in rainy weather to alert other vehicles of your presence. In case of an emergency malfunction while driving, you should turn on the hazard lights, headlights, and use the horn simultaneously.
7
0
Share

How to Reset the Subaru Power Tailgate?

Press and hold the power tailgate button on the left side of the door to close the tailgate. After closing, press the button once more to automatically restore the settings. The car's power tailgate, also known as an electric trunk, refers to the trunk that can be opened or closed using electric power or remote control.
10
1
Share

Can You Release the Clutch Immediately After Shifting Gears in Subject Three?

You cannot release the clutch immediately. The relevant explanation is as follows: Operation requirements: The clutch operation should follow the sequence of 'slow release for first to second gear, slow release for second to third gear, quick release for third to fourth gear, and quick release for fourth to fifth gear.' When the vehicle speed is slow, the clutch should be released gradually; otherwise, the jerking sensation will be strong. Once the speed increases, quickly releasing the clutch will hardly produce any jerking sensation. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. The clutch is a commonly used component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time.
16
4
Share

How Does the Insurance Company Compensate After a Car is Flooded?

Waterlogging insurance refers to the situation where the engine is directly damaged due to water ingress during vehicle use, and the insurance company is responsible for compensation. Comprehensive vehicle damage insurance has been renamed as comprehensive commercial insurance for motor vehicle loss, which includes all additional insurance types, eliminating the need to purchase waterlogging insurance separately.
1
2
Share

What Causes the Steering Column Noise in Toyota Camry?

Toyota Camry steering wheel and steering noise may be caused by insufficient lubrication of the steering column, resulting in high friction; low power steering fluid level; issues with universal joints; aging and hardening of suspension stabilizer bar bushings; or damaged thrust bearings. Below is more relevant information: Load on Toyota Camry steering gear: From the perspective of steering gear principles, the Toyota Camry achieves vacuum assistance, but this only reduces the driver's control effort—the actual load on the steering gear remains unchanged. Therefore, an effective way to reduce steering gear wear is to minimize its operational load. Aging and safety hazards: Car enthusiasts should develop the habit of turning the steering wheel only after the wheels start moving. This reduces friction between the tires and the ground, lessens excessive load on the steering gear, and prevents over-wear of the steering linkage system, which can cause noise when turning. Long-term stationary steering: Not only does this place significant load on the steering gear, but it also accelerates tire surface wear and shortens tire lifespan. To change this habit, quickly turn the steering wheel when the wheels are slightly moving to achieve the desired control.
8
5
Share

How to Handle Vehicle Annual Inspection via 12123 Traffic Management?

After logging into the Traffic Management 12123 APP, enter the process for applying for the exemption inspection mark. Users can apply for the exemption inspection mark for their own registered motor vehicles. Users select the motor vehicle for which they need to apply for the exemption inspection mark. Click [Read and Agree] to enter the vehicle information confirmation page. Confirm the vehicle information, including license plate type, license plate number, vehicle status, inspection expiration date, compulsory traffic insurance effective date, and compulsory traffic insurance termination date.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.