How to set up the dashboard of Changan CS35 Plus?

How to Apply Window Tint Film to Car Glass?

Steps for applying window tint film to car glass: 1. To avoid dust and impurities affecting the tinting effect, the first step is to thoroughly clean the car's glass before applying the film; 2. Areas that may be damaged during the tinting process should be covered in advance to prevent scratches on the car paint, interior, etc. Any accessories that might interfere with the installation should also be removed beforehand; 3. Cut the tint film according to the size of the glass for an initial fit; 4. Apply the roughly cut film to the car glass, then heat-shrink the film for the front and rear windshields to match the curvature of the glass. This ensures the film adheres smoothly to the glass without water marks; 5. After heating, the film will fit snugly on the glass. At this point, fine-tune the film by precisely cutting it to match the shape of the glass; 6. Window tint film is applied to the inside of the glass, so a crucial step is the final application. The interior side of the glass must be cleaned thoroughly, and the film must be applied quickly and accurately, with any moisture promptly smoothed out; 7. After completing the tinting for the entire car, inspect each window, especially the edges and corners. If any bubbles are found, address them immediately.

6

5

Share

Which Signal to Watch When Turning Left?

When there is a dedicated left-turn traffic light, proceed when it turns green. If there is no dedicated left-turn signal, you may turn left when the straight-ahead light is green. Precautions for using turn signals are as follows: While driving: When traffic in your lane is congested and you need to change lanes, check the adjacent lane through the rearview mirror to ensure it is clear. Without obstructing vehicles in other lanes, activate the corresponding turn signal before changing lanes. When making a U-turn: Activate the left turn signal and observe for any oncoming vehicles in front or behind before executing the turn. Honking: On road sections without a solid centerline marking, when overtaking, activate the left turn signal and honk. If being overtaken, yield by moving to the right. When pulling over to park: Activate the right turn signal in advance and observe the traffic situation to the right rear before pulling over. When leaving a parking spot: Activate the left turn signal in advance and observe the traffic situation to the left rear before merging into the traffic lane.

10

1

Share

What to Do If You Lack a Sense of the Car?

Observe the rearview mirror while driving. Make good use of the rearview mirrors to monitor the sides of the vehicle and the distance from the lane dividers. Pay attention to the distance of the vehicle behind you. Always check the rearview mirror when changing lanes. Additionally, during startup, especially for novice drivers, manual transmission cars are more prone to stalling. It's important to master the reverse gear.

12

4

Share

What are the characteristics of radial tires?

Characteristics of radial tires: 1. Due to structural advantages, radial tires make the tread less prone to deformation. With their excellent grip and cushioning performance, they provide drivers with a better and more stable driving experience; 2. Their relatively large radial elasticity results in better cushioning performance and greater load capacity. The steel belt layer in the crown makes them less likely to be punctured by sharp objects; 3. The structural design significantly reduces rolling resistance during driving, greatly lowering fuel consumption and improving fuel economy.

4

Share

The Process and Steps of Taking a Bus

Prepare your ID card and go to the ticket office to purchase and collect your ticket. Take your luggage, go through luggage security, and find the boarding gate indicated on your ticket. Arrive at the designated boarding gate on your ticket 10-15 minutes before departure for check-in. Place your luggage in the bus's luggage compartment, board the bus, and find your assigned seat. You can prepare your phone, ensure you have data, chat with friends, or watch movies to pass the time.

1

Share

Is Xinjiang Suitable for New Energy Vehicles?

Xinjiang is suitable for driving electric vehicles. Here are the benefits of new energy vehicles: Fuel Energy Savings: New energy vehicles generally use natural gas, petroleum gas, hydrogen, or electricity as power sources, saving fuel energy. Reduction of Exhaust Emissions: New energy vehicles do not emit exhaust gases, effectively protecting the environment. Electric vehicles produce no tailpipe emissions and are pollution-free. Hydrogen-powered vehicles emit only water as exhaust, causing no environmental pollution. Because they are essentially zero-emission, they are also exempt from traffic restrictions based on license plate numbers. High Efficiency: New energy vehicles typically employ new technologies and structures, making them more efficient.

5

3

Share

How to set up the dashboard of Changan CS35 Plus?

How to Apply Window Tint Film to Car Glass?

Which Signal to Watch When Turning Left?

What to Do If You Lack a Sense of the Car?

What are the characteristics of radial tires?

The Process and Steps of Taking a Bus

Is Xinjiang Suitable for New Energy Vehicles?

What are the effects of shifting into P gear before the automatic car comes to a complete stop?

How to reset the tire pressure of Haval H2?

How to Reset the Low Tire Pressure Warning in a Car?

What is the wading depth of the Qiao Ge i?