How to Set Up the Auto Window Roll-Up Feature When Locking the Trumpchi GS4?

1 Answers
VanEleanor
07/25/25 7:57am
The method to set up the auto window roll-up feature when locking the Trumpchi GS4 is as follows: 1. Press the brake pedal, shift the gear lever to P, and release the brake pedal; 2. Press the one-touch start button twice in succession, ensuring all doors are closed; 3. Hold down the lock button on the driver's door for more than 10 seconds to complete the locking setup; 4. Roll the window up to the top and release the switch; 5. Press the switch upward again for about three seconds to complete the window roll-up setup. Taking the Trumpchi GS4 2021 270T Manual Comfort Edition as an example: The manufacturer of this car is GAC Motor, classified as a compact SUV, with a gasoline energy type.
Was this review help?
11
4
Share
More Forum Discussions

Is it safe to use a car 12V to 220V converter?

It is safe to use a car 12V to 220V converter. As long as the 12V to 220V conversion is used normally, it will not cause damage to the vehicle's battery. However, overloading it can harm the car. Below are detailed explanations: Precautions: When using a car 12V to 220V converter, note the following: If you need to use the converter to power car appliances after parking, be sure to start the engine to prevent the car battery from draining, which could damage the battery. A common device used for 12V to 220V conversion is called a car inverter, which converts the car's 12V DC power into 220V AC power to meet the electrical needs inside the car. Choosing a car inverter: Select a car inverter product produced or distributed by a professional and reputable manufacturer, ensuring the manufacturer provides after-sales service commitments; it is best to choose the latest model of quasi-sine wave or pure sine wave inverter, avoiding those below quasi-sine wave. Square wave inverters may cause unstable power supply and could damage connected appliances; always choose a product with a metal casing, as metal casings offer good heat dissipation and are non-combustible; when purchasing, check whether the car inverter has over-temperature alarms or protection features.
1
5
Share

What is the material of car covers?

Car covers are divided into PVC material, single-coated material, double-coated flame-retardant material, nano flame-retardant material, PU material, and gold-pulled flame-retardant material. The following is a detailed introduction to car covers: Double-coated flame-retardant material: Sunproof, dustproof, rainproof, scratch-resistant, and flame-retardant, made with high-tech double-coated fabric and finely stitched. Single-coated material and PVC material: Single-coated material has good dustproof and sunproof effects but is not rainproof or scratch-resistant, can only be used on one side, and is only available in silver, which is effective against UV rays. Single-coated material car covers are lighter. PVC material has good dustproof and rainproof effects but is not sunproof or scratch-resistant, can only be used on one side, and is also only available in silver. PVC material car covers are heavier. Nano flame-retardant material: Sunproof, dustproof, rainproof, scratch-resistant, and flame-retardant, nano car covers are made with 560w nano fabric as raw material and finely stitched. PU material car covers: A new type of material, this ultra-fiber leather is called "ultra-fine fiber reinforced PU leather," with excellent wear resistance, cold resistance, breathability, and aging resistance. Gold-pulled flame-retardant material: Sunproof, dustproof, rainproof, and scratch-resistant, can be used on both sides, gold-pulled car covers are made with 718V Oxford fabric as the base material and finely stitched.
19
5
Share

What Causes Reduced Power and Lowered Engine Temperature?

It is primarily due to the engine overheating. The following details the reasons for engine overheating: 1. Insufficient coolant: A lack of coolant or the use of an inappropriate type can prevent the timely removal of heat generated by engine components, leading to elevated water temperature and high engine temperature. 2. Cooling system malfunction: Blockages in the radiator guard mesh or the ventilation channels of the radiator core by debris can impair cooling efficiency. A malfunctioning cooling fan may fail to transfer the heat generated during high-speed operation to the antifreeze in time, affecting heat dissipation. This can result in increased antifreeze temperature, causing issues like boiling over.
8
3
Share

What Does an Exclamation Mark in a Car Indicate?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the car. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is necessary to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.
14
4
Share

How long does it take to get the results of a driver's license physical examination?

Driver's physical examination results are available immediately on-site. Here are some standards for the driver's license physical examination: 1. Vision: For applicants applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tramcars, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For applicants applying for other types of driving licenses, the naked or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 2. Color discrimination: No red-green color blindness. Color-blind individuals cannot obtain a driver's license as they cannot drive normally and may have difficulty seeing traffic signals, which can easily lead to accidents.
20
2
Share

Is It Harmful for a Car to Be Exposed to Rain Continuously?

Due to the protective function of the car's surface paint, the impact of rain on the car is generally minimal. Below are some maintenance tips after your car has been exposed to rain: Timely Car Washing: Rainwater in urban areas is usually acidic and may carry sticky substances. Once the rainwater evaporates, these sticky substances can adhere to the car and become difficult to remove. It is advisable to take your car to a 4S shop or a professional car detailing service as soon as possible for a thorough cleaning. Pay special attention to cleaning the gaps under the doors and the sludge inside the wheel hubs, and ensure these areas remain dry. Paint Care: Rainwater often contains acidic substances that can corrode the outer glossy layer of the car paint. Additionally, rainwater carries invisible dust particles that can oxidize when exposed to sunlight. After rain, it's best to perform a paint treatment on your car. A simple and effective method is waxing. Brake System Maintenance: Most car braking systems use a dual-circuit vacuum-assisted hydraulic system, and the brake fluid, which transmits braking force, is highly hygroscopic. If rainwater enters the brake fluid, it can lead to brake failure or even complete loss of braking. Therefore, during maintenance, it is crucial to check the brake fluid and any water traces on the brake discs to ensure the safety of the driver and passengers.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.