How to Set Up the Auto Lock Feature for the 10th Generation Accord?
4 Answers
To set up the auto lock feature for the 10th Generation Accord, follow these steps: 1. Open the driver's door; 2. Press the brake pedal to prepare for engine start; 3. Press the one-touch start button to start the vehicle; 4. Hold down the door lock button on the driver's door for more than 10 seconds. The 10th Generation Accord is a mid-sized 4-door, 5-seater sedan under GAC Honda, with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, and a fuel tank capacity of 56 liters. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 143 kW and a maximum torque of 260 Nm.
When I first set up the auto-lock feature on my 10th-gen Accord, I was quite nervous since I'm a new car owner who had just bought the vehicle a month ago. The setup steps are actually completed in the vehicle information menu: first, without pressing the brake, quickly press the start button twice to put the car in accessory mode (don't start the engine); then, using the buttons on the right side of the steering wheel or the center touchscreen, navigate to the settings menu and select the door lock settings option. Inside, there's an auto-lock switch—once turned on, you can set a speed threshold, such as automatically locking the doors when the speed exceeds 15 km/h. After trying it a few times, I found this feature incredibly practical, as it prevents doors from accidentally opening while driving, adding an extra layer of safety, especially when I'm picking up or dropping off my kids at school. I’ve made it a habit to check the indicator lights after setting it up to ensure everything works properly. Always remember to perform the setup in a parking lot or safe location—never while driving—to avoid distractions. Additionally, the 10th-gen Accord’s interface is very user-friendly, with clear guidance. If the setup fails, try restarting the system.
Setting up auto-lock on my 10th-gen Accord is something I do frequently, and it only takes two minutes. Start the car without pressing the brake to enter preparation mode, then open the vehicle settings on the center display. Select the door lock function menu and toggle the auto-lock switch on. You can also set the trigger speed—I have mine set to lock at 20 km/h. When driving in the city, the doors lock automatically, saving me the hassle of manual operation, which is incredibly convenient. Over long-term use, I've found it reduces the risk of forgetting to close doors and improves efficiency. For daily use, remember to periodically check if the settings are still active, especially after system updates, which might reset them. Always reconfirm to ensure peace of mind every time you start your journey.
For safety reasons, the auto-lock feature in the 10th-generation Accord is crucial as it prevents the danger of doors accidentally opening while driving. The operation is simple: start the car, enter the setup mode, select the door lock menu to enable the function, and set the speed (e.g., auto-lock at 25 km/h). I rely on it to ensure safety when traveling with my kids, reducing potential accidents. After setting it up, test the function to ensure it responds properly.
