How to Set Up the Audio System in Arrizo 5?

1 Answers
RuthLynn
07/25/25 5:41am
Regarding the audio system setup in Arrizo 5, the following steps are provided: 1. Before adjusting the car audio: First, restore all additional functions of the car's main unit to factory settings, then set the treble, midrange, and bass to the middle positions, and also center the left-right balance. 2. Next, set the amplifier's volume (GAIN) to the lowest position (MIN): Set the FILTER (filter setting) to OFF and the CROSSOVER (cutoff frequency) to the lowest. The car audio system is designed to alleviate the monotony of travel for drivers and passengers. Initially, car AM radios were used, followed by AM/FM radios, tape players, evolving to CD players and compatible DCC and DAT digital audio systems. Nowadays, car audio systems have reached high standards in sound quality, operation, and vibration resistance, capable of withstanding the bumps on rough roads while ensuring stable performance and perfect sound quality.
Was this review help?
12
4
Share
More Forum Discussions

What to Do When the Baojun 730 Car Key is Locked Inside the Car?

Solutions for when the Baojun 730 car key is locked inside the car are as follows: 1. If the door seal is not tight, use a long wire to reach through the gap and hook the lock pin to open it. 2. Use the spare key to unlock the car. 3. Seek help from a professional car locksmith. Relevant information about the Baojun 730 is as follows: 1. Body dimensions: The body dimensions of the Baojun 730 are: length 4710mm, width 1765mm, height 1740mm, with a wheelbase of 2750mm. 2. Trunk dimensions: The conventional trunk volume of the Baojun 730 is 260L. Without adjusting the third-row seats, the depth is 400mm, height is 1060mm, and maximum width is 1170mm.
15
0
Share

How Long Does It Take to Wax a Car?

There are three types of car waxing: 1. Manual waxing: One person is sufficient for manual waxing, taking at most half an hour. 2. Machine waxing: Machine waxing can be done by one or two people, and working together speeds up the process, typically taking about one and a half hours to complete. 3. Polishing and waxing: Polishing and waxing is similar to machine waxing but more thorough, requiring approximately 3 hours. Additional information: 1. Reasons for waxing: Primarily to prevent the car's paint from fading or developing color discrepancies. Since the car body is frequently exposed to the elements, prolonged use can cause the paint color to fade, affecting the car's appearance. Therefore, applying a layer of wax on the car's surface forms a protective layer, effectively preventing paint fading or peeling. 2. Differences between coating, sealing, and waxing: Coating involves applying a special substance on the car's surface to protect the paint and give the body a shiny appearance, typically lasting over a year. Sealing uses a polishing machine to apply and polish a glaze onto the paint surface, which penetrates fine cracks in the paint, offering similar benefits to coating while also repairing minor paint damage. It lasts over two months. Waxing involves applying wax to the paint surface; car wax is semi-solid and provides only basic paint protection, usually lasting about a month before the wax gradually wears off and loses effectiveness.
5
4
Share

What are the differences between the Polo Comfort and Polo Enjoy versions?

The differences between the Polo Comfort and Polo Enjoy versions are: 1. Different tire sizes. The front and rear tire size of the Polo Comfort version is 185/65R14; the Enjoy version's front and rear tire size is 185/60R15. 2. Different safety configurations. The Polo Comfort version does not have front side airbags; the Enjoy version has front side airbags. 3. Different driving assistance systems. The Enjoy version has cruise control and rear parking radar, which the Comfort version lacks. 4. Different external configurations. The Enjoy version has front fog lights and a single sunroof, which the Comfort version does not have. 5. Different seats. The seat folding method for the Polo Comfort version is full folding; the Enjoy version's seat folding method is proportional folding. 6. Different internal configurations. The Enjoy version has a multifunction steering wheel, which the Comfort version lacks. Additionally, the Enjoy version's steering wheel material is leather, while the Comfort version's is plastic. 7. Different infotainment features. The Enjoy version has a trip computer display, voice control, a single-disc CD player, Bluetooth, and more speakers compared to the Comfort version. The Enjoy version has 5~6 speakers, while the Comfort version has 2~4 speakers.
13
0
Share

Can I use my original license plate when changing cars?

First, the license plate must belong to you. Previously, you could only retain the original plate when purchasing a new car. However, under the new license plate regulations, whether you buy a new car or a used one, you can retain the original plate as long as you meet three conditions. Here are the relevant details for retaining a license plate: 1. Timely application: Within one year after transferring or deregistering the old car, the original license plate is reserved for the owner. As long as you apply to the vehicle management office to use the original plate during this period, you can transfer it to the newly purchased car or used car. After one year, the plate will re-enter the selection pool and be publicly released. 2. The original plate must have been used for at least one year: Previously, plates had to be used for over three years to be retained, causing many owners to wait three years before changing cars to keep their plates. Now, you can apply for retention after just one year of use. 3. All violations and accidents involving the original car must be resolved: If there were any road violations or fines related to the original vehicle, all penalties must be paid, and no unresolved traffic accidents must remain before applying to retain the original license plate number.
7
4
Share

How Many Years Can a Car Be Driven Before Scrapping?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, there is no usage period limit for non-commercial small and micro cars. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger cars, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger cars have a scrapping period of 8 years, medium-sized taxi passenger cars have a scrapping period of 10 years, and large taxi passenger cars have a scrapping period of 12 years. Public transport passenger cars have a scrapping period of 13 years, other small and micro commercial passenger cars have a scrapping period of 10 years, and large and medium-sized commercial passenger cars have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal must fill out a copy of the "Motor Vehicle Change, Transfer, Modification, Suspension, and Scrapping Approval Application Form" and affix the owner's seal. The registration office accepts the application and issues a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, after being verified by the motor vehicle inspection office and meeting the scrapping standards, a "Vehicle Scrapping Notice" is issued. The owner chooses a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company dismantles the vehicle and takes photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner submits the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates are recycled, and the scrapping registration is processed according to regulations after approval. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle cannot be driven back to the registration location due to damage, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. Commercial vehicles converted to non-commercial use must be scrapped according to the original commercial vehicle scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application must meet the following conditions: (1) The application is submitted within six months after the transfer or cancellation registration; (2) The owner has owned the original vehicle for more than three years.
5
4
Share

What is the fuel consumption of the 2007 Toyota Reiz?

Toyota Reiz 2007 old model engine fuel consumption is definitely on the higher side, around 11L. After all, engine technology wasn't as mature back then as it is now. Factors affecting fuel consumption: 1. Driving conditions: This is very easy to understand. No matter where you are, traffic jams happen. Stop-and-go driving, waiting at traffic lights, and driving in the city will result in higher fuel consumption. On the highway, maintaining a steady engine speed without high revs will be more fuel-efficient. 2. Air conditioning: In the hot summer, turning on the cool AC is a great comfort. But it's also a major culprit for high fuel consumption. Driving with the AC at maximum setting consumes 5-25% more fuel than driving with it off. 3. Passenger/cargo weight: Vehicle weight has a significant impact on fuel consumption. With a full load of passengers or cargo, fuel consumption will inevitably increase. Therefore, try to minimize unnecessary items in the car to reduce weight and save fuel. 4. Tires and tire pressure: Different tires have different rolling resistance. Low tire pressure increases the contact area between the tire and the ground, leading to higher rolling resistance. Therefore, maintaining standard tire pressure is more fuel-efficient.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.