How to set up one-touch window roll-up for the 2014 Verna?
3 Answers
Press and hold the switch to the first position until the window moves to the desired position; then press slightly harder to the second position, and the window will automatically roll down. Lift the button to the first position, release when the window reaches the desired position; then briefly pull the switch to the second position to let the window close automatically.
As an experienced car enthusiast who frequently tinkers with vehicles, I've driven many modern models including the 2014 Verna. Setting up one-touch window lift is actually quite simple. Turn the ignition switch to the ON position (without starting the engine), then press and hold the driver's side window down button until the window fully lowers to the bottom. Release the button and wait a few seconds. Next, press and hold the window up button to raise it to the top – keep holding for about 5 seconds until you hear a faint click or see an indicator light flash, indicating the system has memorized the one-touch position. If there's no response, it might be due to low battery voltage or software needing a refresh; try disconnecting the battery for a few minutes to reset. This daily maintenance trick helps prevent window jamming issues. Always check your owner's manual for specific details to avoid surprises.
As an average car owner, I often make this small adjustment, and the setup for the 2014 Verna is super convenient. After powering on the car, hold down the window-down button to lower the window all the way, then release and wait for it to stop. Next, pull up the window-up button to raise the window, but don’t let go immediately when it reaches the top—count to five before releasing. Usually, a click sound confirms the setup is complete. The whole process takes just half a minute, but be sure to do it while parked and stay focused. When teaching my wife, I reminded her that if the window doesn’t respond, try a few times to rule out temporary glitches. If it still doesn’t work, check if a fuse is blown or if the contacts are dirty and need cleaning. Regularly setting this feature can improve driving convenience, so I recommend trying it to keep your car’s smart system running smoothly.
