···
Log in / Register

How to set up one-touch window lift for the Boyue?

1 Answers
VonLayla
07/23/25 9:04pm

The method to set up one-touch window lift for the Boyue is: 1. With the fuel tank cap, trunk, front hood, and all four doors closed, press and hold the unlock button on the remote transmitter, and all four windows will simultaneously lower until fully open; 2. Press and hold the lock button on the remote transmitter, and all four windows will simultaneously rise until fully closed. The body dimensions of the Boyue are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm. It is equipped with a 1.8TD engine and a 2.0L naturally aspirated engine paired with a 6-speed manual transmission, delivering a maximum power at 5500 rpm and a maximum torque of 285 Nm.

Was this review help?
4
5
Share
More Forum Discussions

What Happens If You Fail the Driving Test Five Times?

If you fail the driving test five times, you can only cancel your personal information at the driving school and then re-register for learning. Legal provisions: Article 44 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Within the validity period of the learning driving certificate, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests shall not exceed five times. If the fifth scheduled test is still not passed, the results of other subjects that have been passed will be invalidated. Notes: If you fail the driving test five times, you will have to pay the fee again and retake the test. In fact, this only applies to the Subject 2 and Subject 3 tests. If you fail the Subject 2 and Subject 3 tests five times, all your previous results will be invalidated. However, there is no limit on the number of attempts for Subject 1 and Subject 4. Even if you fail five times, you still have the opportunity to continue taking the test. This five-attempt limit does not apply to all subjects.
1
3
Share

Where to Find a Place to Duplicate Car Keys Nearby?

There are two options for duplicating car keys: one is to go directly to a car 4S store, and the other is to go to an auto parts market. Price comparison: The auto parts market has an advantage. At a 4S store, even a basic key can cost several hundred to thousands of yuan, with some high-end keys even exceeding ten thousand yuan. In contrast, the auto parts market offers a price advantage, often at least half the price of a 4S store. Operation method comparison: The 4S store has an advantage. A 4S store provides a brand-new smart car key. The lost key's code is deactivated in the system, and a new code is generated and activated for the replacement key. This method is secure—even if someone finds the previously lost key, it will no longer work to unlock the car. In the auto parts market, the method involves cracking the system to create a duplicate key identical to the original. Although it can unlock the car and start the ignition, there is a risk—if someone else finds the key, they can still use it to open the car.
2
1
Share

Should I Use 92 or 95 Octane Gas for My New Car?

Cars with a compression ratio between 8.5 and 9.5 should generally use 92 octane gasoline; vehicles with a compression ratio greater than 9.5 should use 95 octane gasoline. Differences in compression ratio: Cars with a compression ratio between 8.5 and 9.5 should generally use 92 octane gasoline; vehicles with a compression ratio greater than 9.5 should use 95 octane gasoline. Regarding octane rating: 92 octane gasoline has a lower octane rating than 95 octane gasoline. Specifically, 92 octane gasoline contains 92% isooctane, while 95 octane gasoline has an octane rating of 95%. The gasoline octane number represents its octane rating. For example, 92 octane gasoline consists of approximately 92% isooctane and 8% n-heptane. Since isooctane has better anti-knock properties compared to n-heptane, a higher octane number indicates a higher octane rating and better anti-knock performance of the gasoline.
13
4
Share

Will Not Wearing a Seat Belt Be Captured and Fined?

Not wearing a seat belt can be captured and fined. Current cameras are high-definition with resolutions at the decimeter level. At a certain distance, they can not only capture the driver's basic condition but also distinguish facial features. Not wearing a seat belt will be clearly recorded. Correct way to use a seat belt: Pick up the latch plate, pull the seat belt across your body, insert the latch plate into the buckle until you hear a "click," then pull the belt to confirm it is locked. Pull the shoulder strap upward to tighten the lap belt (the lap belt should be across the hips, not the abdomen). Check the position of the seat belt and adjust the height adjuster to the appropriate position. Precautions for wearing a seat belt: The seat belt should be worn high and tight, avoiding swinging or collisions. The length of the safety rope should be limited to 1.5–2.0 meters; for ropes longer than 3 meters, a buffer should be added. Do not tie knots in the rope or attach hooks directly to the safety rope; instead, use a connecting ring. Components of the seat belt should be inspected every two years.
11
3
Share

How many seats can an A2 driver's license drive?

An A2 driver's license can drive buses with up to 19 seats. Permitted vehicle types for A2: It is for tractor units. Holders of a valid A2 license issued by the Chinese public traffic police vehicle management authority can drive heavy and medium-sized full trailers and semi-trailer motor vehicle combinations. Other permitted vehicle types: It also allows driving vehicle types permitted by B1, B2, C1, C2, C3, C4, and M licenses. Buses are commonly classified into large, medium, small, and mini based on total weight or number of seats: Large: Vehicle length ≥6m or seating capacity ≥20 people. Variable seating capacity is determined by the upper limit. Medium: Vehicle length <6m, seating capacity >9 and <20 people. Small: Vehicle length <6m, seating capacity ≤9 people.
18
1
Share

Why is the door light still on when the car door is locked?

The door is already closed, but the door light remains on, indicating that the door is not tightly shut. This situation may occur because a certain car door or the trunk is not properly closed. You can try forcefully opening and closing the door repeatedly. It could also be due to poor contact or a malfunction in the internal switch of a door lock. Try opening and closing each door separately to resolve the issue. Fault code appears: The fault indicator light generally does not illuminate and will turn off after starting. If the fault light remains on, it means there is a fault code in the vehicle. Repair at the 4S shop: If the ECU is not powered off, the fault code will be recorded. At the 4S shop, a reader can be used to determine the fault code and the corresponding fault content. It is recommended to go to the 4S shop for repair.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.