···
Log in / Register

How to Set Up One-Touch Window Control with the Boyue Key

5Answers
OAmara
07/29/2025, 11:41:57 AM

Geely Boyue Key One-Touch Window Control: 1. Remote Open/Close Window: When the vehicle is in the "OFF" position, and the fuel tank cap, trunk, front hood, and all four doors are closed, press and hold the unlock button on the remote transmitter to simultaneously lower all four windows until fully open. 2. Press and hold the lock button on the remote transmitter to simultaneously raise all four windows until fully closed. If the unlock or lock button is released during window operation, the glass will stop moving up or down. Boyue Window One-Touch Control Reset/Learning: 1. Pull the switch to the manual up position and hold until the window glass is fully raised to the top position. 2. Pull the switch again and hold for 1 second before releasing. 3. If necessary, force reinitialization can be performed: When the power window is at the upper soft stop point, pull the switch to the manual up position and hold for about 1 second before releasing.

Was this review help?
120
Share
LeNathan
08/14/2025, 11:12:35 PM

When I drove the Boyue before, I also researched this feature and remember it was quite convenient to set up. First, sit in the car without starting the engine, press the start button twice to power on the vehicle, then locate the small gear icon on the central control screen and enter the settings menu. Inside, there's a vehicle settings option—click it and scroll down to find the window-related settings. Just toggle the 'remote window roll-up' switch on (some models might call it 'one-touch window roll-up'). After successful setup, when you exit the car, press and hold the lock button on the key fob for about five seconds, and all windows will automatically close. If you can't find this option on your central control screen, it might be a software version issue—I recommend visiting a 4S shop to have them activate it via computer programming. This feature is super practical, especially useful for quickly cooling down the car after summer heat exposure.

Was this review help?
3
Share
Expand All
DiDamian
10/11/2025, 11:22:13 PM

The one-touch window lift feature in the Boyue is actually related to the vehicle's infotainment system. The usual procedure is to first power on the vehicle without starting the engine, then navigate to the settings interface on the central control screen and select the vehicle settings menu. Next, locate the comfort features or window control section, where you'll find the one-touch window lift switch option—simply activate it. After setup, remember to test it: press and hold the lock button on the key fob for about 5 seconds outside the car, and the windows should automatically roll up. I once encountered a situation where some base models might require a window initialization first. The specific operation involves lowering the window, then pulling and holding the switch for three seconds, followed by raising the window and holding for another three seconds to reset the program. If it still doesn't work, it might be a BCM module issue, and it's best to have a professional technician check the circuit.

Was this review help?
9
Share
Expand All
OZoe
11/24/2025, 11:25:29 PM

The operation is actually quite straightforward: First, enter the vehicle and power it on, then open the central control screen and tap on Settings. Locate the Vehicle option. In the Door & Window settings, activate the one-touch window roll-up function. After that, exit the vehicle and long-press the lock button on the key fob, waiting a few seconds for the windows to close automatically. If there's no response after setup, you may need to first check if the window anti-pinch function is triggering properly, or try operating with the key fob closer to the vehicle. What some new owners might not know is that this setting can also simultaneously enable the automatic window closing feature on rainy days, which is quite smart.

Was this review help?
18
Share
Expand All
GiannaFitz
01/15/2026, 12:57:27 AM

Here's how I set up the window roll-up function for the Boyue key: With the power on, enter the central control settings and select the door & window option in the vehicle menu. After enabling the remote window roll-up feature, test it by long-pressing the lock button until the windows are fully closed. Note that setup paths may vary across different model years—for instance, early models might lack an electronic menu and require manual initialization. During operation, it's advisable to ensure the key fob battery is sufficiently charged and maintain a distance within 2 meters from the vehicle for optimal stability. By the way, when this function is turned off, the car key can still activate the alarm by pressing the lock button twice consecutively—a quite practical anti-theft feature.

Was this review help?
3
Share
Expand All
More Q&A

Can a sedan accommodate 4 adults and 2 children (6 people in total)?

No, it cannot carry six people as it constitutes overloading. Here are the relevant details: 1. Overloading: Refers to when a transportation vehicle's actual load exceeds the maximum permitted limit. Freight overloading typically means the cargo transported by motor vehicles exceeds the vehicle's loading capacity. 2. Penalties for overloading: Any vehicle exceeding 20% of the approved passenger capacity is considered overloaded and will be penalized under new traffic regulations. The new regulations have increased penalty points for serious overloading violations by drivers of key vehicle types: Operating a commercial passenger vehicle exceeding 20% of approved capacity results in 12 penalty points; operating a commercial passenger vehicle exceeding capacity by less than 20%, or operating other passenger vehicles exceeding 20% of approved capacity results in 6 penalty points. Operating passenger vehicles (excluding commercial buses and school buses) exceeding capacity by less than 20% results in 3 penalty points.
111
Share

What is the minimum and maximum speed for straight-line driving?

Straight-line driving speed should be between 30 km/h and 40 km/h, meaning it should not be lower than 30 km/h or higher than 40 km/h. Below are some relevant techniques for straight-line driving: Selecting a reference point: When driving straight, the driver should look ahead and pay attention to both sides, choose a reference point, maintain straight-line driving, correct the direction in time, and always be aware of various traffic conditions ahead to detect and handle them promptly. Adjusting the viewing distance ahead in time: Look far and near while holding the steering wheel straight. The driver should adjust the viewing distance ahead according to the speed. At higher speeds, look further ahead; at lower speeds, look appropriately closer, and use peripheral vision to monitor the surroundings. Steering smoothly: Operate the steering wheel by pulling with one hand and pushing with the other, ensuring smooth control. Keep both hands shoulder-width apart and avoid using excessive force.
113
Share

How to Set the Toyota RAV4 Lock Beep?

Toyota RAV4 lock beep setting method is as follows: 1. After sitting in the driver's seat, step on the RAV4's brake pedal and put the gear in the P position; 2. After releasing the brake pedal, press the RAV4's one-touch start button twice consecutively. Note that there should be a certain interval between these two button presses to give the vehicle system time to react. 3. After closing all doors, hold down the lock button on the driver's side door for more than 10 seconds. Relevant information is as follows: 1. The lock beep function can confirm whether the motor vehicle is locked, providing a certain safety effect. 2. The lock beep sound of a motor vehicle is used to remind the driver that the vehicle is locked. If the original vehicle is not equipped with this feature, it can be modified later. After modification, the vehicle can have a lock beep sound, which will prompt the driver when locking the vehicle, making it convenient for the driver to know the vehicle's status.
107
Share

What brand is GAC Trumpchi?

GAC Trumpchi is the first independently developed model by GAC Group, positioned in the mid-to-high-end market. GAC Trumpchi possesses the capability to compete with joint-venture vehicles in terms of technology, configuration, and quality. As a pioneer among domestic brands, it continues to impact the mid-to-high-end automotive market. Currently, GAC Trumpchi has established sales and service channels in 14 countries. Below are additional details: 1. Introduction: GAC Trumpchi is a wholly-owned subsidiary established by Guangzhou Automobile Group Co., Ltd. It is a high-tech enterprise dedicated to the research and development of complete vehicles, engines, automotive accessories, and automotive engineering technologies. Founded on July 21, 2008, its headquarters is located in Panyu District, Guangzhou. Products include the Trumpchi series of sedans and SUVs. 2. Brand Culture: GAC Trumpchi is GAC Group's first independently developed model, targeting the mid-to-high-end market. Adhering to the brand philosophy of 'Building good cars for loved ones and filling the world with love,' it integrates the resources and experience of GAC Group, insists on independent innovation, and is committed to developing vehicles suitable for Chinese driving habits and road characteristics.
106
Share

How to Distinguish Between Four-Wheel Drive and Two-Wheel Drive in Audi A6?

Audi A6 distinguishes between four-wheel drive and two-wheel drive as follows: If the rear emblem has the word 'quattro', it is four-wheel drive. If the rear emblem does not have the word 'quattro', it is two-wheel drive. The Audi A6 is a mid-to-large-sized car under the Audi brand, equipped with three types of engines: a low-power version 2.0-liter turbocharged engine, a high-power version 2.0-liter turbocharged engine, and a 3.0-liter turbocharged engine. Below are the details about the engines: 1. The low-power version 2.0-liter turbocharged engine has a maximum power of 140kw and a maximum torque of 320 Nm. 2. The high-power version 2.0-liter turbocharged engine has a maximum power of 180kw and a maximum torque of 370 Nm. 3. The 3.0-liter turbocharged engine has a maximum power of 250kw and a maximum torque of 500 Nm.
119
Share

What are the uses of the black stalk on the Corolla dashboard?

The usage methods of the black stalk on the Corolla dashboard are as follows: 1. Check instant fuel consumption and average fuel consumption: Toggle the black stalk on the dashboard to switch between displays; distinguishing between the two is very simple - instant fuel consumption constantly fluctuates, such as being very high during acceleration or braking, but relatively low when maintaining a constant speed or releasing the throttle, while average fuel consumption generally doesn't change in the short term. 2. Additionally, if you want to check your average speed or calculate the distance of a specific trip, these can also be achieved by toggling this inconspicuous little black stalk. It's worth noting that when using the trip meter function, you should first press and hold the small black stalk to reset the counting data before starting a new count. 3. Furthermore, the vehicle's remaining range can also be checked by toggling this black stalk. After all, the fuel gauge only provides a very rough indication, whereas the remaining range can intuitively display approximately how much farther the fuel in the tank can support the vehicle.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.