How to Set Up One-Touch Window Control on Baojun 730?

[RyderFitz]

To set up the one-touch window control on Baojun 730, follow these steps: 1. Start the vehicle; 2. Locate the one-touch window control button on the armrest; 3. Press and hold the button down for 5 seconds; 4. Pull and hold the button up for 5 seconds; 5. The one-touch window control setup is now complete. Taking the 2021 Baojun 730 as an example, it belongs to the MPV category with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, featuring a wheelbase of 2750mm and a fuel tank capacity of 52 liters. The 2021 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, a maximum power output of 108kW, and a peak torque of 250Nm, paired with a 6-speed manual transmission.

[McSabrina]

As a Baojun 730 owner, I wanted to set up the one-touch window operation right after getting the car, which is quite convenient. Here's how: First, make sure the vehicle's power is in ACC or ON mode, not OFF. Then locate the window control button and select the window you want to set. Push the button upward to fully raise the window, and after reaching the top, keep holding it for about 3 seconds. You'll hear a slight 'click' sound or see the window automatically retract slightly, indicating success. Similarly, pulling the button downward and holding it for 3 seconds sets the one-touch lowering function. This process initializes the memory point, so if the battery is replaced or a malfunction occurs, it needs to be redone. Once set, a light press of the button during normal driving will automatically open or close the window completely. If it doesn't work, there might be dust stuck in the window track—check it or have it cleaned at a 4S shop. After all, window operation is related to driving safety, especially during rain when quick window closing prevents water ingress and potential short circuits. Regularly checking the fuses is also necessary to ensure the system runs stably and avoid issues from misoperation.

[LillianDella]

I've been driving the Baojun 730 for two years, and setting up the one-touch window control is quite simple. Here are the steps: Turn the car key to the ACC position without starting the engine; select a window, such as the main driver's button; push it firmly upwards to raise it to the top; continue holding the button for two or three seconds until you feel it lock automatically or the indicator light flashes. Then test the one-touch function: lightly press the button to see if it can automatically complete the raising or lowering. If there's no response, repeat the operation. This setup is usually necessary after installing a new module or a power outage, otherwise the function may fail. Common issues include poor button contact or dust accumulation on the rails, so it's recommended to regularly clean the edges of the tracks with a soft cloth. By the way, the one-touch feature in the Baojun 730 is quite practical, reducing distractions during long drives and avoiding the need for manual operation. Safety first—if the setup fails multiple times, it's best to go directly to a 4S shop to check the circuit or for a software update, saving time and ensuring peace of mind. Make it a habit to check the system quarterly to extend its lifespan.

[OAxel]

Setting the one-touch window control function is essential for Baojun 730 owners. Here's the specific method: After getting in the car, turn the key to the ACC position; select the window control button; push the button to the highest point and hold for about 3 seconds, then pull it to the lowest point and hold for another 3 seconds. This will activate the automatic mode. After completion, lightly press the button to test if it operates smoothly. If it doesn't work, it might be due to a reset from the last power disconnection or button jamming—try gently shaking it. From a maintenance perspective, this function relies on sensor and module coordination. When driving normally, avoid using excessive force to close the windows to protect the mechanism well. Simple handling can resolve the issue, no professional skills required.