How to Set Up One-Touch Window Control for the Magotan?
4 Answers
Method to set up one-touch window control for the Magotan: First, pull the window button up to raise the window completely to the top, then hold it for 3-5 seconds before releasing. Next, press the window button down to lower the window completely to the bottom, and again hold it for 3-5 seconds before releasing. After this, test the one-touch function, which should now be operational. Below is an introduction to the one-touch window feature: 1. One-touch window control refers to a system where the car window glass can be fully raised or lowered with a single press of a button. Cars equipped with this feature have a two-stage window control switch. The first stage operates like a standard power window. The second stage allows the window to automatically open or close completely with just a single press and release of the button. 2. With standard power windows, you need to hold the switch until the window reaches the desired position, releasing the button stops the movement.
I've set the one-touch power window feature on my Magotan several times, and it's quite simple. Sit in the car, turn the key to the power-on position without starting the engine, and make sure all doors are closed. Then press and hold the window up button for the window you want to set until the glass reaches the top, and continue holding for a few more seconds. Release the button and quickly press it once to test if the auto-up/down function works. If not, repeat the same steps by pressing and holding the window down button all the way for several seconds. Sometimes the system needs to relearn the positions, especially after a battery replacement. Function failure might be due to dirty window tracks or motor issues – cleaning the tracks and applying lubricant can help. One-touch operation saves time and enhances safety, making window adjustments much quicker when parked, especially during rainy days. If the operation fails, don't panic – try restarting the power or visit a 4S shop to check the fuses.
My car is the Magotan, and the one-touch window control feature is both practical and effortless. Setting it up is a breeze: power on the car without starting the engine, press and hold the window switch's up button until the glass reaches the top, wait for three to four seconds, then release. Repeat the same process by pressing the down button all the way and holding it for a few seconds before releasing. This way, the automatic memory is set. Now, when driving in and out of the neighborhood or on the highway, I can easily raise or lower the windows with just a press, without the distraction of prolonged operation. If it doesn’t work, it might be due to low battery power or contact issues—just recharge and reset. For maintenance, regularly clean the window seals to prevent dust from affecting functionality, and don’t wait until it fails to take action. The one-touch window feature is truly thoughtful, reducing driving fatigue and enhancing convenience. I taught myself this trick as soon as I got the new car—simple and safe.
I've dealt with similar issues before, and setting up the one-touch up/down feature for the Magotan isn't difficult. After powering on, press and hold the window button to raise it to the top for a few seconds before releasing to complete the setup. The same applies to the window lowering operation—ensure you hear a beep or feel the completion. If the function isn't working, it might be due to a circuit short or aging switches; check if the battery connections are tight. One-touch up/down enhances daily driving efficiency. Keep the window system clean to avoid malfunctions.
