How to Set Up One-Touch Window Control for the Honda Vezel?
3 Answers
Honda Vezel one-touch window control setup method: First, start the vehicle, press and hold the switch to lower the window completely for 5 seconds, then press and hold to raise the window completely for another 5 seconds before releasing. Once completed, the one-touch function will be activated. Currently, only the driver's window is equipped with the one-touch feature; the other three windows operate on a press-to-move basis. The Vezel is a compact SUV under the Honda brand, equipped with two engine options: a 1.5L naturally aspirated engine and a 1.5L turbocharged engine. The 1.5L naturally aspirated engine delivers a maximum power of 96 kW and a maximum torque of 155 Nm, while the 1.5L turbocharged engine offers a maximum power of 130 kW and a maximum torque of 220 Nm. Both engines incorporate VTEC technology and direct fuel injection, and utilize aluminum alloy cylinder heads and blocks.
The first time I drove the Vezel, I found this feature very intuitive to set up. You need to start the engine after getting in the car to ensure the electrical system is functioning properly, which allows accurate window programming. Then, sit in the seat and operate the window switch: press the window down button, hold it until the window is fully lowered, then continue holding for a few more seconds before releasing; next, pull the switch up to the top, and similarly, hold it for a few seconds after reaching the top before letting go. The whole process takes less than half a minute, and after setup, a short press of the button will automatically raise or lower the window. I find this very convenient for daily commuting, reducing fatigue from prolonged pressing. If the initial setup doesn’t succeed, trying a couple more times can clear the memory system. Regularly cleaning the window tracks can also prevent interference with normal function, making the one-touch operation more reliable.
I usually enjoy setting these features myself, and the Honda Vezel's one-touch window operation isn't too complicated. Before getting in the car, make sure the doors are closed and turn the key to the ON position to power up. Use the driver's side window switch to first press down all the way, and when the window reaches the lowest point, don't let go—hold for an additional five seconds before releasing. Then pull the switch up to the top, and at the highest position, continue pressing for the same duration before releasing. This completes the setup, enabling one-touch operation for quick window opening and closing. Remember to test if it's responsive; if it's slow, there might be dust or obstruction in the window tracks, so occasional lubrication is recommended to prevent issues. Overall, the setup process is simple and quick, eliminating the hassle of frequent manual operation.
