How to Set Up One-Touch Auto Up/Down for Nissan Sylphy Windows

1 Answers
LeLily
07/29/25 7:46pm
Taking the 14th generation Sylphy as an example, the method to set up one-touch auto up/down for windows is as follows: 1. Lower the driver's window completely. 2. Turn the ignition switch off and then back on to the ON position. 3. Pull the driver's window switch upward to the highest position. 4. After the window reaches the top, hold the switch for 5-10 seconds before releasing. 5. Turn off the ignition switch and wait for 10 seconds to complete the one-touch window function setup. Here are some key features of the 14th generation Sylphy: 1. The new Sylphy is equipped with an evolved third-generation HR16 engine, with slight improvements in power and torque. It delivers a maximum power of 139 horsepower and a maximum torque of 169 N·m. 2. The transmission system is matched with a CVT gearbox. With the help of ECO mode and ISS (Intelligent Start-Stop system), the manufacturer claims the fuel consumption can be as low as 4.9L/100km, and it meets the China VI emission standards. 3. The dimensions of the new 14th generation Sylphy have been slightly increased. It measures 4641mm in length, 1815mm in width, 1447mm in height, with a wheelbase of 2712mm.
Was this review help?
11
3
Share
More Forum Discussions

Where is the fuse for the Livi horn?

The fuse for the Livi horn is located in the fuse box under the hood. Precautions for using the car horn: 1. Avoid getting wet: When washing the car in winter, be sure to prevent the horn from getting wet. If the horn gets wet, dry it with an air gun as soon as possible. 2. Avoid prolonged pressing: Try not to press the horn for extended periods frequently, as this can cause premature burning and erosion of the horn contacts, leading to increased resistance. This reduces the current flowing through the electromagnetic coil, weakening the electromagnetic force, which may fail to attract the armature to drive the diaphragm for normal vibration, resulting in a hoarse sound or even no sound at all. 3. Avoid frequent replacement: If the horn malfunctions, seek help from a professional repair technician instead of blindly replacing the horn, which can lead to unnecessary waste.
3
5
Share

How to steer when the right side of the car scrapes against a wall?

Do not turn the steering wheel or turn it to the right directly while reversing. Wait until the car body is a certain distance away from the corner of the wall before slowly straightening the steering wheel and reversing further to align the car body. Below is relevant information: 1. Most common issues when drivers make sharp right-angle turns: The right front or left rear door scrapes against the wall when turning left, and the right B-pillar or its surrounding area scrapes against the wall when turning right. 2. How to make the turn: If you can still turn the steering wheel to the right, turn it a bit more while reversing to move away from the wall faster. After moving away from the wall, drive forward a bit before turning right. When turning right, keep the car as close to the left as possible, and only turn the steering wheel to the right after two-thirds of the car body has passed the corner. Pay attention to the rearview mirror.
13
2
Share

What is the difference between buying a car in full payment and installment?

Those with sufficient funds can pay in full, while installment car purchases are beneficial for both the car owner and the 4S dealership. For the owner, it reduces the financial burden, allowing them to avoid spending a large sum of money at once. For the dealership, it can improve sales efficiency and even generate additional fees during the installment process. Below are the specific differences: 1. Insurance difference: Full payment requires payment of purchase tax, registration fee, compulsory insurance, and vehicle tax, while insurance is optional. For loan purchases, full insurance coverage is required nationwide as mandated by banks. 2. Mortgage issue: During the loan period, the vehicle's ownership is not in the owner's hands as it is used as collateral. The mortgage is lifted only after the loan is fully repaid. For loan purchases, the vehicle's title, purchase invoice, and full insurance policy are held by the bank until the loan is repaid. Full payment does not require any mortgage.
6
4
Share

What Are the Advantages of Hydrogen-Powered Vehicles?

Here are the advantages of hydrogen-powered vehicles: 1. Zero or near-zero emissions. 2. Reduced water pollution caused by oil leaks. 3. Lower greenhouse gas emissions. 4. Improved fuel economy. 5. Increased engine combustion efficiency. 6. Smooth and quiet operation. Below is more information about hydrogen-powered vehicles: 1. Hydrogen-powered vehicles are divided into two types: hydrogen internal combustion vehicles, which use an internal combustion engine to burn hydrogen (usually obtained by decomposing methane or electrolyzing water) and oxygen from the air to generate power, and hydrogen fuel cell vehicles, which use hydrogen or hydrogen-containing substances and oxygen from the air to generate electricity through a fuel cell, which then powers an electric motor to drive the vehicle. 2. The power plants of these vehicles convert the chemical energy of hydrogen into mechanical energy, either by burning hydrogen in an internal combustion engine or by reacting hydrogen with oxygen in a fuel cell to power an electric motor.
9
0
Share

Where is the engine number located on the Ford Territory?

The engine number of the Ford Territory is located under the engine hood, in the front part of the vehicle. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following four ways: The vehicle's driving license will have the engine number printed, usually located in the second-to-last line; The motor vehicle registration certificate will record the engine number; The purchase invoice of the vehicle will record the engine number; The vehicle purchase tax payment certificate will record the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer, and engine models can be the same. The engine number, however, refers to the production number of the engine, where each engine can only have one unique engine number, and no two engines will have the same number.
11
5
Share

What to Do If the Cruze Air Conditioning Is Not Cooling?

Solutions for the Cruze air conditioning not cooling: 1. First, ensure that your operation is correct. The cooling system only works when the engine is running and the compressor is turned on. 2. If you confirm that the operation is correct but the air conditioning still doesn't work, it indicates a problem with the vehicle's air conditioning system. It is recommended to promptly visit a 4S store or a professional auto repair shop for inspection. Below are the correct steps to turn on the Cruze air conditioning: (1) Press the A/C button. Pressing the A/C button activates the vehicle's compressor, and the air conditioning starts cooling. (2) There is an indicator light on the A/C button. Whether the air conditioning is on or not is determined by the indicator light on the button. (3) If the indicator light is on, it means the air conditioning is turned on; if the indicator light is off, it means the air conditioning is not turned on.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.