How to set up automatic window closing when locking the 2021 Boyue?

What Are the Reasons for a Fuel Tank Cap Not Locking?

Fuel tank cap not locking is due to deformation of the fuel tank cap, damage to the locking mechanism, or issues with the wiring harness. Deformation of the car's fuel tank cap can cause it to jam when closing; if the fuel tank cap is not aligned with the lock hole and is forced shut, it can lead to severe deformation of the cap, necessitating replacement with a new one. It could also be due to damage to the locking mechanism, which would require replacement of the locking mechanism. Some cars use an electronic unlocking device inside the fuel tank cap, similar to the working principle of a solenoid valve. This mechanism can also result in the fuel tank cap not locking properly, possibly due to issues with the power supply wiring harness of the electronic lock. Since the internal structure of the electronic lock is located inside the rear wheel liner, the wiring harness connector can be corroded by dirty water and dust after the wheel is submerged, affecting the switch. It is important to address wiring harness issues promptly. To deal with damaged wiring harness connectors and harnesses, protect the wiring harness by applying conductive paste inside the connectors and plugs to prevent future corrosion.

18

5

Share

What Are the Reasons for Being Unable to Shift Gears?

The reasons why a car cannot shift gears are as follows: 1. No fuel: The fuel gauge shows below the red line, naturally making it impossible to start. 2. Dead battery: This may be due to a drained battery caused by leaving headlights on for too long or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. Checking for a dead battery is simple—just press the horn. 3. Incorrect gear position: For automatic transmission cars, the gear must be in P (Park) or N (Neutral) when starting. If it is in R (Reverse) or D (Drive), the car will not start. Some manual transmission cars also won’t start if the clutch is not depressed. 4. Lack of antifreeze: Some car owners use water or low-quality antifreeze, leading to the entire cooling system freezing in extremely cold winter conditions. This can crack the engine, render the water pump inoperable, prevent the car from starting, and damage other engine components. 6. P-lock solenoid valve failure: For safety reasons, to prevent accidental shifting into other gears when starting the vehicle, a P-gear solenoid valve is installed. This solenoid valve requires a signal from the brake pedal to release. These two components are interconnected, so a failure in either one will prevent the gear lever from being moved out of P to other gears. 7. Gear lever assembly failure: Internal gear wear in the gear lever can cause it to get stuck, making it difficult to move forward or backward, resulting in an inability to shift gears or difficulty in shifting. 8. Incomplete clutch disengagement: This may be caused by a faulty clutch disc or pressure plate. Typically, the clutch three-piece set—friction disc, pressure plate, and release bearing—needs to be replaced.

12

2

Share

Why is the Vehicle Stability Control System Light On?

Vehicle Stability Control System light is mainly caused by a fault in the vehicle stability electronic control system. If this fault occurs, it is recommended to visit a 4S shop to use a professional decoder to read the fault code, and then proceed with repairs based on the fault code. The Vehicle Stability System, also known as the ESP system, primarily consists of three major components: sensors, actuators, and an electronic control unit. Below is a related introduction to the Vehicle Stability System: 1. Function: The Vehicle Stability System is an active safety system in automobiles that greatly enhances vehicle handling and safety. When the car makes sharp turns or accelerates suddenly, the sensors on the vehicle can quickly detect and take corresponding measures to control the car's tires accordingly, while also reducing engine power output to ensure vehicle stability. 2. Included Scope: The Vehicle Stability Control System also includes ABS and ASR. ABS prevents the car from locking up during braking, and ASR prevents the car from slipping during startup.

7

4

Share

How to Quickly Solve a Car That Won't Start?

Here are specific solutions for difficult engine starting: 1. Carbon buildup causing ignition issues. If accompanied by slight shaking at idle, clean the throttle body and fuel injectors. 2. Weak spark plug ignition energy. Failure to replace spark plugs after maintenance cycle leads to severely reduced ignition capacity, potentially causing misfires. 3. Insufficient fuel system pressure. Low fuel pressure directly causes secondary ignition attempts; specifically check fuel pressure regulator, fuel pump, fuel filter and internal lines. 4. Battery depletion. Requires jump-starting using another vehicle or battery.

15

5

Share

What are the differences between ATS and XTS?

The main difference between ATS and XTS lies in their positioning. The ATS is positioned as a performance-oriented extended midsize sedan, while the XTS leans more towards comfort as a full-size sedan. Relevant details are as follows: 1. The ATS is rear-wheel drive, which provides particularly strong power, and its chassis performance is also excellent. The ATSL is equipped with a 2.0-liter turbocharged engine featuring direct fuel injection technology and an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission. 2. The XTS adopts a front-engine, front-wheel-drive layout, and the overall precision of the vehicle is outstanding. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.

2

Share

What is the L gear in a car used for?

L gear is the low-speed mode of the transmission. Here is a detailed introduction to specific car gears: 1. P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will stop in place even without pressing the brake, and it is generally used for long-term parking. When engaging the P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always apply the handbrake. When parking on a slope, first apply the handbrake and then engage P gear. 2. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. 3. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are in free rotation, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in N gear when the car is being towed. 4. D gear is the drive gear: When the gear lever is in the D gear position, the gears inside the transmission automatically switch between the lowest and highest gears based on factors such as vehicle speed and throttle opening, following preset shifting patterns. In most cases, D gear can be used for driving.

10

5

Share

How to set up automatic window closing when locking the 2021 Boyue?

What Are the Reasons for a Fuel Tank Cap Not Locking?

What Are the Reasons for Being Unable to Shift Gears?

Why is the Vehicle Stability Control System Light On?

How to Quickly Solve a Car That Won't Start?

What are the differences between ATS and XTS?

What is the L gear in a car used for?

What Causes Increased Car Fuel Consumption?

What brand of car is the GM logo?

Can Pickup Trucks Be Driven in the City?

What are the differences between Yadea Guaneng T2 and T5?