How to Set Up Automatic Mirror Folding for the 8th Generation Accord?

2 Answers
StAddyson
07/24/25 10:38am
First, select the vehicle on the central control panel, press the left button on the MMI, then enter the interface and select vehicle settings, followed by central locking. Next, check the option to fold the mirrors, and the mirrors will automatically fold when the car is locked.
Was this review help?
17
5
Share
Tricia
08/11/25 5:42am
I also drive an eighth-generation Accord. The auto-folding feature on this car is very convenient and is mainly set up via the remote key. After parking and turning off the engine, quickly press the lock button twice in succession on the remote key, and the side mirrors will automatically fold in. If it doesn’t work, the feature might not be enabled. Try entering the car in a quiet place without starting the engine. Go to the vehicle settings menu on the central control screen, find the ‘Mirrors’ option, check the auto-folding option, and save it. The setup location may vary slightly between different Accord versions, and the base model might not have this feature, requiring manual folding or installing an additional module. In practice, it’s much more hassle-free, helping avoid scratches when parking on the roadside and adding anti-theft protection. I recommend checking the user manual first to confirm details and avoid misoperation. With regular practice, it’ll become second nature.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What are the real reviews from Haval F7X owners?

Appearance: The car has a bold and stylish look with high aesthetic appeal. The paintwork is of excellent quality. The interior is clean and tidy, equipped with a 7-inch display screen that looks premium and upscale. The interior is generally decent, with uniformly stitched seats and steering wheel, and the leather feels good. Full marks for its simple and elegant design, free from any odors and environmentally friendly. Strong Power: The F7X offers two engine options, a 1.5T and a 2.0T. The 2.0T engine can deliver a maximum output of 224 horsepower and a torque of up to 385 Nm. Such power figures are quite sufficient for a compact SUV, making highway overtaking effortless. Additionally, the Haval F7X is equipped with a 7-speed wet dual-clutch transmission, which, compared to dry dual-clutch transmissions, is less prone to overheating, has a longer lifespan, and generally offers faster gear shifts. This 7-speed dual-clutch also performs well in minimizing jerks, with almost no noticeable jerks at low to medium speeds. High Configuration and Value for Money: The car comes with a full suite of driver assistance systems, 360-degree panoramic imaging, 5 driving mode options, adaptive cruise control, auto hold, automatic parking, hill descent control, keyless entry system, remote start, and features like ventilated and heated front seats. Excellent Space Performance: Although the F7X is positioned as a compact SUV, its body length reaches 4.6 meters with a wheelbase of 2.7 meters, making it relatively large among compact SUVs. In practical seating experience, the Haval F7X offers ample legroom in the rear seats, and the roofline does not compromise practicality due to its coupe-like design. Space performance is indeed a major selling point of the F7X. Poor Noise Insulation: It can be said that noise insulation is not a strong point for any Haval model, and the F7X is no exception. Engine noise easily enters the cabin during acceleration, and the sound insulation in front of the firewall is inadequate. Moreover, when the speed exceeds around 80 km/h, wind noise from the A-pillar becomes increasingly noticeable, and tire noise from the wheel arches can also be heard in the rear seats.
11
2
Share

What is the unique trick to prevent veering off during straight-line driving in Subject 3?

Frequent veering during Subject 3 is caused by incorrect driving techniques. Here are some tips related to Subject 3 driving: 1. Proper Steering: Hold the steering wheel correctly. The driver should grip the wheel at the 3 and 9 o'clock positions, with the left hand as the primary and the right hand assisting. Keep the arms and wrists relaxed, avoiding a tight grip. 2. Direction Correction: Make timely adjustments. When feeling the vehicle drifting off course, make slight corrections without large steering movements. 3. Focus on Alignment: Look far ahead. While driving, the driver's gaze should extend forward from the cabin along the front of the vehicle, parallel to the geometric centerline of the road or lane. The farther the gaze, the earlier deviations are detected, allowing for timely corrections. 4. Maintain Speed: Keep a steady speed. Driving too slowly in a straight line can actually make veering more likely, so maintaining a consistent speed helps in keeping the vehicle straight.
3
0
Share

What Causes Water Leakage Under the Car When the Air Conditioning is On?

Here are the specific reasons for water leakage under the car when the air conditioning is on: 1. Evaporator drainage: Because the car's air conditioning system is equipped with an evaporator inside the dashboard, when the air conditioning is turned on (A/C button ON), the surface temperature of the evaporator becomes very low. The moisture in the hot air inside the car will condense on the surface of the evaporator's heat-absorbing fins, and the water droplets are collected by the plastic housing of the evaporator and discharged out of the car through a pipe. 2. Compressor condensation formation: Sometimes, the exterior of the compressor (low-pressure area) installed in the engine compartment can condense moisture from the air, causing it to drip onto the ground. 3. Lack of insulation foam wrapping: If the low-pressure pipes are not wrapped with insulation foam, the surface of the pipes can easily condense moisture from the air, and water droplets often gather and drip from the lowest point of the pipes.
15
4
Share

Can the test location for Subject 4 be changed?

In principle, Subject 4 cannot be taken at a different test center; you must take the exam at the location where you registered. Below are the precautions for the Subject 4 exam: 1. Verify information: After sitting down, first verify the examinee information. If it does not match your details, check if it is your assigned seat. If not, find your correct seat. If the seat is correct but the information is wrong, report it immediately. 2. Follow test center rules: During the Subject 4 exam, adhere to test center discipline. If you make loud noises during the waiting period, you will be expelled and disqualified from taking the exam that day. 3. Follow instructions: Obey the staff's arrangements. If you have questions, raise your hand and ask the examiner—don't be afraid. 4. Adjust the camera position: Adjust the camera to focus on the upper third of your face and chest. If your face is not within the monitoring range, your score will be invalidated.
5
1
Share

How Often Should the Clutch Plates in an AT Automatic Transmission Be Replaced?

Generally, it is recommended to replace them every 100,000 kilometers. Below is an introduction to clutch-related information: 1. Whether replacement is needed: It varies from person to person, mainly depending on driving habits. It can also be said that if the car still performs very powerfully, the clutch plates may not need replacement. Of course, sometimes an experienced mechanic is needed to make this judgment, or the driver can also determine based on their daily driving experience. 2. Precautions: When driving normally, do not rest your foot on the clutch pedal. Avoid using the half-clutch technique while driving. In special circumstances where half-clutch is necessary, minimize the duration to prevent burning out the clutch friction plates. Due to advancements in automotive manufacturing technology, the double-clutching technique is generally no longer used in passenger cars or some models with synchronized transmissions. However, in special situations, such as when quickly downshifting on a downhill or in muddy, icy, or snowy conditions, it may still be necessary.
6
3
Share

Is Car Film Applied on the Inside or Outside?

Car film is applied on the inside. Applying it on the inner side avoids exposure to wind and rain, ensuring the film is not subject to significant external interference during use. Since the film is adhesive and not exposed to weathering, it adheres more firmly and remains unaffected during use. If applied on the outside, it could be damaged by windshield wipers or soaked by rainwater, leading to bubbling of the window film. Benefits of car film: It blocks ultraviolet rays, reduces heat, and prevents injuries caused by sudden glass shattering. Additionally, due to the one-way transparency feature of solar film, it helps protect personal privacy. Moreover, it can reduce air conditioning energy consumption, enhance aesthetics, and to some extent, improve fuel efficiency. Precautions for applying film: Avoid washing the car within three days after applying the film to prevent moisture from causing the film to peel off. After the film is applied, do not roll down the side windows for 24 hours in summer and 48-72 hours in winter.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.