How to set the window regulator of Hongqi H5?
4 Answers
The steps to set the window regulator of Hongqi H5 are as follows: 1. First, locate the window button and press and hold it for several seconds without releasing; 2. Close the window directly by raising it to the top; 3. Press the down button of the window regulator, again without releasing, and wait for several seconds to complete the setup. Relevant information about Hongqi is as follows: 1. Hongqi is a domestic Chinese car brand, positioned as a high-end automobile under the direct management of China FAW Group Corporation. 2. Since its inception, Hongqi has aimed to develop China's premier automobile, primarily targeting discerning individuals who appreciate luxury, focusing on style, quality, and emotion.
As an owner of the Hongqi H5, I've used the window regulator settings several times and would like to share the steps. First, you need to turn on the ignition without starting the engine, then locate the window control button on the driver's side door. Press and hold the button in the upward position for about 10 to 15 seconds. During this time, the window will slowly rise to the top, and you might hear a slight beep or see the indicator light flash, indicating a successful learning process. This sets up the one-touch up/down feature, which is quite straightforward. After completing the setup, test it by lightly pressing the button to see if the window automatically moves up or down. I perform this regularly since dust accumulation can affect the tracks, and doing this ensures smoother operation and prevents pinching. If there's no response in a new car, it might not have been initialized at the factory—just try a couple more times. The Hongqi H5's electronic system responds well, and combining this with routine maintenance like cleaning the tracks can extend its lifespan. It's best to check the owner's manual for specific details, as there might be slight variations between different model years. I've helped others set this up a few times without any issues.
Setting up the power window is quite simple. Ensure the car is powered on, but don't start the engine. First, close the window completely, then pull and hold the window switch in the upward position for about 15 seconds to allow the system to learn the limit position and anti-pinch force. Release the button and test the one-touch function once completed. If the window behaves erratically or gets stuck, it might be due to low battery power or dirty tracks—recommend recharging before retrying. I've noticed that after setting up the Hongqi H5, its anti-pinch response becomes faster, enhancing safety. In daily use, avoid pulling the switch forcefully; gentle operation better protects the motor. Occasionally resetting the system, such as after cold winter days, can resolve sluggish window movement. Combining this with cleaning and lubricating the tracks can prevent malfunctions and extend component lifespan. Remember to avoid operating in humid conditions to prevent electrical issues.
When I first drove the Hongqi H5, I also set the window lift. Operation: Turn the ignition to the ACC position to power on, then hold the window button for more than ten seconds to let the car memorize the position. After completing this, a light press of the button will enable one-touch up/down. Beginners don’t need to worry—it’s simple and easy to understand. If it fails, just repeat the process. After setting, it’s more convenient to use, and the anti-pinch function will work properly. The manual has instructions, so it’s recommended to check it out. Be careful not to press the button too hard—just a light touch is enough.
