How to set the tire pressure monitoring in Lavida?
1 Answers
Lavida tire pressure monitoring setting method: After ignition, press and hold the SET button of the tire inflation pressure control system, wait for the indicator light to illuminate, inflate all tires to the specified inflation pressure, then turn on the ignition switch, press and hold the SET button, the warning light on the combination instrument will illuminate, and it will turn off after confirming that the new parameters are stored. Below is an introduction to related content: 1. The structural principle of tire pressure monitoring is that the central processing unit sends low-frequency commands through the antenna to activate the tire pressure sensor. After the tire pressure sensor is awakened, the high-frequency signal containing its own identifier is sent to the central processing unit through the antenna. 2. The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure the tire pressure, and uses a wireless transmitter to send the pressure information from inside the tire to the central receiver module, and then displays the tire pressure data of each tire. When the tire pressure is too low or there is a leak, the system will automatically alarm.