How to set the time on the small screen of the 2011 Highlander?
2 Answers
The method to set the time on the small screen of the 2011 Highlander is: 1. There is a disp button on the right side of the steering wheel. First, press this button briefly until the clock (clock) is displayed, then press and hold the button, and the hour digits will start flashing; 2. Continue holding the disp button until the desired hour is reached, then release. After about 5 seconds, the minute digits will start flashing. Press and hold the button again until the desired minute is reached. Taking the 2011 Highlander 2.7L 2WD 5-seat Elite Edition as an example, its body dimensions are 4785mm in length, 1910mm in width, and 1730mm in height, with a wheelbase of 2790mm. The body structure is a 5-door, 5-seat SUV.
My 2011 Highlander has been running for ten years, and I'm quite familiar with adjusting the small screen time. First, you need to locate the button labeled 'DISP' on the right side of the steering wheel. Press and hold it for two or three seconds until you see the time digits on the screen start flashing. Then, use the directional buttons to adjust the hours—the left button decreases by one hour, and the right button increases by one hour. After setting the hours, briefly press 'DISP' to switch to minute adjustment, using the same directional buttons. Finally, press 'DISP' once more to save the settings. Remember, this must be done with the ignition on; it won't work when the engine is off. If the steering wheel buttons aren't responding, first check the corresponding fuse in the fuse box—older cars are prone to poor contact. After adjusting the time, take a moment to check if the date is correct; you can also adjust the year, month, and day by holding down 'DISP'.
