How to set the time on the new Octavia?

1 Answers
SanIsabelle
07/29/25 10:49pm
There are three methods to set the time on the new Octavia: 1. Locate the knob on the dashboard, press and hold this button for 2 seconds. At this point, the short-trip mileage will reset. Rotate left or right, and when the clock icon starts flashing, you can adjust the time. 2. After turning on the car, the CLK button displays and sets the time. Press and hold CLK for about 5 seconds until the time display starts flashing on the screen. Use the adjustment keys: turn left to decrease, turn right to increase. The clock and minute selection keys allow you to adjust the time. Press CLK again to confirm. 3. Adjust the small black cylinder on the dashboard. Turn it left once, and the hour display will start flashing, allowing you to adjust the hours. Press once to increase by one hour. Turn it again, and the minute display will start flashing, allowing you to adjust the minutes. Press once to increase by one minute. Note: You can only increase the time; there is no way to decrease it.
Was this review help?
19
2
Share
More Forum Discussions

What to Do When the Vehicle License is About to Expire?

The solutions for an expiring vehicle license are: 1. Participate in the motor vehicle inspection within 90 days before the expiration date; 2. For non-exempt vehicles, the owner should bring the authorization letter, vehicle license, and compulsory traffic insurance policy to the motor vehicle inspection station at the testing location for vehicle inspection. After passing the inspection, apply for the inspection qualification mark directly at the station; 3. For vehicles exempt from inspection within 6 years, the public security traffic management department will no longer inspect the motor vehicle when issuing the inspection mark. They will only review the motor vehicle inspection mark application form, vehicle license, compulsory traffic insurance certificate, vehicle and vessel tax payment or tax exemption certificate, and verify the handling of traffic safety violations and traffic accidents. If everything complies with the regulations, the inspection mark will be issued, noted on the supplementary page of the vehicle license, and the motor vehicle inspection mark application form will be stored in the motor vehicle file.
18
1
Share

How to adjust the time on a Cruze?

Press CONFIG on the central control settings, then enter the vehicle parameter settings where the first option is for adjusting the time and date. The specific steps are as follows: 1. First, power on the vehicle. 2. Turn on the central control display. 3. Enter the menu for time and date adjustment. 4. After making adjustments, press the confirm button. 5. Check if the time has been adjusted correctly.
7
1
Share

What is the Safe Following Distance on Highways?

Highway safe following distance varies depending on the situation: 1. When the speed exceeds 100 kilometers per hour, a distance of more than 100 meters should be maintained from the vehicle in front in the same lane; 2. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately reduced, but should not be less than 50 meters. Precautions for driving on highways include: 1. Both the driver and front-seat passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle in front, the turn signal must be activated in advance; 4. Only adjacent lanes are allowed for overtaking, and the vehicle should immediately return to the driving lane after overtaking. Vehicles must not ride or drive on the lane dividing line; 5. Do not reverse, drive in the opposite direction, cross the central divider to make a U-turn or turn, conduct test drives, drive training vehicles, or overtake or park on ramps.
6
1
Share

What is the actual lifespan of a CVT transmission?

CVT transmission has an actual lifespan of approximately 400,000 kilometers. CVT transmissions can achieve continuously variable transmission over a wide range, providing optimal matching between the drivetrain and engine conditions. By relying on the transmission's continuously variable speed adjustment to adapt to various vehicle speeds, the engine can operate under favorable conditions for extended periods, improving combustion efficiency and correspondingly enhancing fuel economy. The functions of the transmission are: 1. To change the transmission ratio to meet the traction needs under different driving conditions; 2. To enable reverse driving; 3. To interrupt the power transmission to the drive wheels during engine startup, idling, and gear shifting.
17
4
Share

How to remove the fuel tank cap of Lavida?

Lavida fuel tank cap removal method: 1. First unlock the car, and the fuel tank lock will also be released. Press on one side of the fuel tank cap to open it; 2. There are two small screws inside the fuel tank cap. Remove the screws to detach the exterior part of the fuel tank. The fuel tank cap refers to the square-shaped box on the car used for storing gasoline, made of stainless steel with excellent sealing. It has only a small circular opening, about the size of a bottle cap, for easy storage, usually located at the rear of the car. The main fuel tank's fuel gauge is connected to the dashboard inside the cabin, while the auxiliary fuel tank's fuel gauge can be displayed via an external glass tube on the tank. The Lavida has a body length, width, and height of 4605mm, 1765mm, and 1460mm respectively, with a wheelbase of 2610mm. The car navigation system combines touch screen and knob control operation, with MP3 playback capability, supporting USB, AUX, and SD card expansion slots, featuring user-friendly and powerful functions. The LCD screen adopts a foldable design.
10
4
Share

What to Do If You Lose Your Car Key Remote?

Solutions for losing a car key remote are: 1. Use the spare key; 2. Contact a locksmith to unlock the car. The functions of a car key remote include: 1. Automatically closing windows after turning off the engine; 2. Locating the car easily in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening windows. Precautions for replacing the battery in a car key are: 1. Wrap the tip of the screwdriver with a cloth when disassembling the key to prevent damage; 2. Keep the disassembled key and circuit board dry and avoid contact with water; 3. Do not touch the components on the circuit board; 4. Ensure the new battery model matches the old one.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.